build: use set -e to interrupt scripts on first failure

deploy.sh

@@ -1,3 +1,7 @@
+#!/bin/bash
+
+set -e
+
 check_exists() {
     command -v "$1" > /dev/null
 }
@@ -26,13 +30,13 @@ then
     exit 1
 fi
 cargo espflash erase-flash
-cd factory &&
-cargo espflash flash --release &&
-cargo espflash save-image --release --chip esp32c3 factory.bin &&
-espsecure.py sign_data factory.bin --version 2 --keyfile ../secure_boot_signing_key.pem &&
-espflash write-bin 0x10000 factory.bin &&
-cd ../sphinx-key &&
-cargo espflash save-image --bin sphinx-key --release --chip esp32c3 sphinx-key.bin &&
-espsecure.py sign_data sphinx-key.bin --version 2 --keyfile ../secure_boot_signing_key.pem &&
-espflash write-bin 0x50000 sphinx-key.bin &&
+cd factory
+cargo espflash flash --release
+cargo espflash save-image --release --chip esp32c3 factory.bin
+espsecure.py sign_data factory.bin --version 2 --keyfile ../secure_boot_signing_key.pem
+espflash write-bin 0x10000 factory.bin
+cd ../sphinx-key
+cargo espflash save-image --bin sphinx-key --release --chip esp32c3 sphinx-key.bin
+espsecure.py sign_data sphinx-key.bin --version 2 --keyfile ../secure_boot_signing_key.pem
+espflash write-bin 0x50000 sphinx-key.bin
 cargo espflash monitor

monitor.sh

@@ -1,9 +1,8 @@
+#!/bin/bash
+
 check_exists() {
     command -v "$1" > /dev/null
 }
-check_port() {
-    cargo espflash board-info --port "$1" &> /dev/null
-}
 if ! check_exists esptool.py
 then
     echo "esptool.py not installed!"
@@ -22,26 +21,4 @@ then
     echo "install with this command: cargo install cargo-espflash"
     exit 1
 fi
-for FILE in /dev/tty.*
-do
-    if check_port $FILE 
-    then
-        PORT=$FILE
-        break
-    fi
-done
-if [ -z "$PORT" ]
-then
-    # Check for port on linux
-    if check_port /dev/ttyUSB0
-    then
-        PORT=/dev/ttyUSB0
-    fi
-fi
-if [ -z "$PORT" ]
-then
-    echo "ESP likely not connected! Exiting now."
-    echo "Make sure the ESP is connected with a data USB cable, and try again."
-    exit 1
-fi
-cargo espflash monitor --port $PORT
+cargo espflash monitor

sphinx-key/clear_sd.sh

@@ -1,9 +1,10 @@
+#!/bin/bash
+
+set -e
+
 check_exists() {
     command -v "$1" > /dev/null
 }
-check_port() {
-    cargo espflash board-info --port "$1" &> /dev/null
-}
 if ! check_exists esptool.py
 then
     echo "esptool.py not installed!"
@@ -28,7 +29,7 @@ then
     echo "install with this command: cargo install espflash"
     exit 1
 fi
-cargo espflash save-image --bin clear --release --chip esp32c3 clear.bin &&
-espsecure.py sign_data clear.bin --version 2 --keyfile ../secure_boot_signing_key.pem &&
-espflash write-bin 0x50000 clear.bin &&
+cargo espflash save-image --bin clear --release --chip esp32c3 clear.bin
+espsecure.py sign_data clear.bin --version 2 --keyfile ../secure_boot_signing_key.pem
+espflash write-bin 0x50000 clear.bin
 cargo espflash monitor

sphinx-key/run.sh

@@ -1,11 +0,0 @@
-CFLAGS=-fno-pic
-
-CC=$PWD/.embuild/espressif/tools/riscv32-esp-elf/esp-2021r2-patch3-8.4.0/riscv32-esp-elf/bin/riscv32-esp-elf-gcc
-
-SSID=sphinx-1 PASS=sphinx-1234 cargo build --release
-
-esptool.py --chip esp32c3 elf2image target/riscv32imc-esp-espidf/release/sphinx-key
-
-esptool.py --chip esp32c3 -p /dev/tty.usbserial-1420 -b 460800 --before=default_reset --after=hard_reset write_flash --flash_mode dio --flash_freq 40m --flash_size 4MB 0x10000 target/riscv32imc-esp-espidf/release/sphinx-key.bin
-
-espmonitor /dev/tty.usbserial-1420

sphinx-key/sphinx_key.sh

@@ -1,3 +1,7 @@
+#!/bin/bash
+
+set -e
+
 check_exists() {
     command -v "$1" > /dev/null
 }
@@ -25,7 +29,7 @@ then
     echo "install with this command: cargo install espflash"
     exit 1
 fi
-cargo espflash save-image --bin sphinx-key --release --chip esp32c3 sphinx-key.bin &&
-espsecure.py sign_data sphinx-key.bin --version 2 --keyfile ../secure_boot_signing_key.pem &&
-espflash write-bin 0x50000 sphinx-key.bin &&
+cargo espflash save-image --bin sphinx-key --release --chip esp32c3 sphinx-key.bin
+espsecure.py sign_data sphinx-key.bin --version 2 --keyfile ../secure_boot_signing_key.pem
+espflash write-bin 0x50000 sphinx-key.bin
 cargo espflash monitor