Compare commits

...

168 Commits

Author SHA1 Message Date
Romain Vimont
95ae248dc9 wip-zoom-range 2025-12-09 20:53:39 +01:00
Romain Vimont
75e73e4218 Display fps set with '{}'
Replace "fps=[15, 30, 60]" with "fps={15, 30, 60}".

The default toString() implementation for a SortedSet uses '[]', but
it is more correct to use '{}' to denote a set.
2025-12-09 20:52:47 +01:00
Romain Vimont
d4581fc68a Add shortcuts to switch the camera torch
MOD+l turns on the camera torch, MOD+Shift+l turns it off.

TODO ref 6243

Co-authored-by: Tommie <teh420@gmail.com>
2025-12-09 20:26:21 +01:00
Tommie
95c8018f3a Add option to turn on the camera torch
Add --camera-torch to turn on the camera torch when the camera starts.

TODO ref 6243.

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-12-09 20:26:21 +01:00
Romain Vimont
cb7a8b18af Simplify camera startup code
Avoid multiple back-and-forths between the caller thread and the camera
thread.
2025-12-09 20:26:21 +01:00
Romain Vimont
50d79e758a Enable "reset video" shortcut for camera
Make the existing "reset video" feature (MOD+Shift+R) also work for a
camera video source.
2025-12-09 20:26:21 +01:00
Romain Vimont
ac26cac4f7 Enable controls for camera video source
This will allow the implementation of camera-specific shortcuts.

Co-authored-by: Tommie <teh420@gmail.com>
2025-12-09 20:26:21 +01:00
Romain Vimont
6923ee6870 Throw error on unexpected control message type 2025-12-09 20:26:21 +01:00
Romain Vimont
552cbeb631 Group control event shortcuts
Group together the shortcuts that trigger control events to be sent to
the device.
2025-12-09 20:26:21 +01:00
Romain Vimont
b04032d6f7 Simplify capture invalidation
Remove the unnecessary requestInvalidate() indirection. Use a single
invalidate() method instead.
2025-12-09 20:26:21 +01:00
Romain Vimont
8e4f38c401 Move precondition checks for input events
Always call the appropriate method responsible for handling the input
event, which can then decide to do nothing.
2025-12-09 20:26:21 +01:00
Romain Vimont
c21b36c255 Detect frame size mismatch in decoder
Warn if the size of a decoded video frame does not match the session
metadata.
2025-12-09 20:26:21 +01:00
Romain Vimont
5560e39559 Properly handle session packets in delay_buffer
The delay buffer must forward the session packets while preserving
their order relative to media packets.
2025-12-09 20:26:21 +01:00
Romain Vimont
7840c48043 Add session metadata for video stream
Introduce a new packet type, a "session" packet, containing metadata
about the encoding session. It is used only for the video stream,
and currently includes the video resolution.

For illustration, here is a sequence of packets on the video stream:

                                        device rotation
                                        v
    CODEC | SESSION | MEDIA | MEDIA | … | SESSION | MEDIA | MEDIA | …
           1920x1080 <-----------------> 1080x1920 <------------------
                      encoding session 1            encoding session 2

This metadata is not strictly necessary, since the video resolution can
be determined after decoding. However, it allows detection of cases
where the encoder does not respect the requested size (and logs a
warning), even without decoding (e.g., when there is no video playback).

Additional metadata could be added later if necessary, for example the
actual device rotation.

Refs #5918 <https://github.com/Genymobile/scrcpy/pull/5918>
Refs #5894 <https://github.com/Genymobile/scrcpy/pull/5894>

Co-authored-by: gz0119 <liyong2@4399.com>
2025-12-09 20:26:21 +01:00
Romain Vimont
599c17a5a2 Rename "codec meta" to "stream meta"
The stream metadata will contain both:
 - the codec id at the start of the stream
 - the session metadata (video width and height) at the start of every
   "session" (typically on rotation)
2025-12-09 20:26:21 +01:00
dddddjent
db5c9e83ef Fix SDL colorspace matching AVCOL_SPC_RGB
Use BT.709 color space for AVCOL_SPC_RGB.

Refs #1868 comment <https://github.com/Genymobile/scrcpy/issues/1868#issuecomment-3293917796>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-12-09 20:26:21 +01:00
Romain Vimont
1c602f88e5 Build SDL3 for test step on Github Actions
The latest Ubuntu does not provide the SDL3 package yet.
2025-12-09 20:26:21 +01:00
Romain Vimont
d9791c506f Upgrade SDL build script for SDL3 2025-12-09 20:26:21 +01:00
Romain Vimont
4fd28755e0 Check programming errors reported by SDL3
TODO ref SDL issue 14223
2025-12-09 20:26:21 +01:00
Romain Vimont
5853adc860 Remove workaround for macOS TODO
TODO refs 3031
TODO refs SDL 5340 5976
2025-12-09 20:26:21 +01:00
Romain Vimont
7ec2e611dd Migrate from SDL2 to SDL3
Refs <https://wiki.libsdl.org/SDL3/README-migration>
2025-12-09 20:26:21 +01:00
Romain Vimont
8d4770a6c1 Improve color space conversion
Use both the color space and color range from FFmpeg to determine the
appropriate SDL YUV conversion mode.
2025-12-09 20:26:21 +01:00
Romain Vimont
a0b4b3d36e Set color range during texture creation
This prepares for the migration to SDL3, where the color range can only
be specified at the time of texture creation.
2025-12-09 20:26:21 +01:00
Romain Vimont
ba6fa134af Create texture on first frame
The texture was created as soon as the initial video size was known,
even before the first frame arrived.

However, texture creation will require other data, such as the color
range, which is only available once the first frame is received.

Therefore, delay texture creation until the first frame.
2025-12-09 20:26:21 +01:00
Romain Vimont
ee8534dccd Remove prepare_for_frame()
Inline the function body in its only caller.

This will simplify further refactors.
2025-12-09 20:26:21 +01:00
Romain Vimont
750bb1a61b Handle mouse integer scrolling locally
Do not rely on SDL to expose integer scroll values, as they are not
available in all versions.

It was reimplemented in SDL 3.2.12 by this commit:
<0447c2f3c3>

Refs #6156 <https://github.com/Genymobile/scrcpy/issues/6156>
2025-12-09 20:26:21 +01:00
Romain Vimont
5b51396a8c Fix permission denial error after Android upgrade
Assign the FakeContext instance to ActivityManager.mContext to avoid a
permission error:

    Permission Denial: package=android does not belong to uid=2000

Fixes #6523 <https://github.com/Genymobile/scrcpy/issues/6523>
2025-12-09 20:24:42 +01:00
Romain Vimont
7e66062086 Extract function to execute code on a handler
Extract function to synchronously execute code on a handler, waiting for
the execution to complete.
2025-11-28 22:42:17 +01:00
Romain Vimont
6f9eb31d52 Add missing test for START_APP serialization
A test for Java deserialization of the START_APP control message was
already present, but the corresponding C-side serialization test was
missing.

Refs 13ce277e1f
2025-11-25 00:13:13 +01:00
Romain Vimont
9cfa5b197a Create Application instance via instrumentation
This fixes an issue on certain Meizu devices.

Fixes #6480 <https://github.com/Genymobile/scrcpy/issues/6480>
2025-11-23 15:56:31 +01:00
valord577
7dd9bcaf60 Prevent error log interleaving
Between the calls to CONSOLE_ERR.print() and
printStackTrace(CONSOLE_ERR), logs from other threads may be inserted.

Synchronizing access to CONSOLE_ERR ensures that logs from different
threads do not mix.

PR #6487 <https://github.com/Genymobile/scrcpy/pull/6487>

Signed-off-by: valord577 <valord577@gmail.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-11-18 11:17:17 +01:00
Romain Vimont
3530851071 Fix uncaught exception handler
The default handler was mistakenly retrieved after our custom handler
was set, causing it to reference itself. As a result, this led to
infinite recursion.

Bug introduced by eee3f24739.
2025-11-04 20:35:39 +01:00
Romain Vimont
d0047b2110 Do not fail when uniqueId field is missing
On some devices, DisplayInfo does not have a "uniqueId" field. This
field is only used for correct UHID behavior on virtual displays, so its
absence should not prevent scrcpy from working.

Refs #6009 <https://github.com/Genymobile/scrcpy/pull/6009>
Fixes #6461 <https://github.com/Genymobile/scrcpy/issues/6461>
2025-11-01 00:34:20 +01:00
Romain Vimont
3281fda6ef Set URL explicitly in dependency build scripts
Explicitly set the URL of each dependency at the beginning of its
script.

PROJECT_DIR and FILENAME are internal details.
2025-10-30 22:31:16 +01:00
Romain Vimont
925949d54a Refactor dependency build scripts initialization
Rename "common" to "_init" because it not only exposes common functions
but also initializes environment variables.

Call _init in a single line in all dependency build scripts.
2025-10-30 22:27:17 +01:00
Yan
f3d4fde15b Fix handling of non-integer ANDROID_PLATFORM
ANDROID_PLATFORM is not always an integer; it can also be a value like
"36.1". Handle such cases properly.

This fixes the following error:

    server/build_without_gradle.sh: line 89:
    [[: 36.1: syntax error: invalid arithmetic operator (error token is ".1")

PR #6408 <https://github.com/Genymobile/scrcpy/pull/6408>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-10-19 21:00:05 +02:00
Romain Vimont
eee3f24739 Upgrade Gradle and use Android SDK 36 2025-10-19 21:00:05 +02:00
Romain Vimont
3e40b24737 Fix UHID_OUTPUT message parsing
The bounds check was incorrect.

Fixes #6415 <https://github.com/Genymobile/scrcpy/issues/6415>
2025-10-09 09:35:14 +02:00
Romain Vimont
9d7a4c88e0 Apply workarounds in the cleanup process
Accessing settings may require workarounds on certain devices.

Fixes #6405 <https://github.com/Genymobile/scrcpy/issues/6405>
2025-10-05 21:36:10 +02:00
Romain Vimont
e5e58b1b30 Upgrade links to 3.3.3 2025-09-27 16:10:10 +02:00
Romain Vimont
10a0974f43 Bump version to 3.3.3 2025-09-23 21:18:45 +02:00
Romain Vimont
be21e43be5 Fix frame leak on pending frame update
The previous pending frame was not unreferenced before referencing the
new one, causing frames to leak whenever a texture update failed
(typically on Windows when the window is minimized with D3D9).

Refs 6298ef095f
Fixes #4297 <https://github.com/Genymobile/scrcpy/issues/4297>
Fixes #6357 <https://github.com/Genymobile/scrcpy/issues/6357>
2025-09-23 21:18:45 +02:00
Romain Vimont
bfb0872493 Avoid resetting pending frame
The function update_texture() calls update_texture_internal() and falls
back to set_pending_frame() if it fails.

When the frame passed is the pending frame, call only the _internal()
version instead.

This will prevent issues with frame reference counts by ensuring the
source and destination frames are never the same.

Refs 6298ef095f
Refs #6357 <https://github.com/Genymobile/scrcpy/issues/6357>
2025-09-23 21:18:08 +02:00
Romain Vimont
e11399aff0 Ignore unknown methods in IDisplayWindowListener
New Android versions may add methods to IDisplayWindowListener.aidl.
When these methods are called by the system, they result in an
AbstractMethodError because they are not implemented on the scrcpy side.

To avoid releasing a new version for each newly added method, ignore
them at the Binder level.

Refs afaca80b37
Fixes #6362 <https://github.com/Genymobile/scrcpy/issues/6362>
2025-09-18 10:29:42 +02:00
David Griswold
9d56d26d45 Make virtual display presentable
With this flag, apps with baked in two-screen support can see the
virtual display as an external display they can present to.

PR #6344 <https://github.com/Genymobile/scrcpy/pull/6344>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-09-11 21:02:13 +02:00
Romain Vimont
f663bbec12 Update links to 3.3.2 2025-09-06 14:54:36 +02:00
Romain Vimont
2506d1768b Bump version to 3.3.2 2025-09-06 14:36:37 +02:00
Romain Vimont
4ee94cb845 Workaround clipboard issue on Samsung devices
Fixes #6224 <https://github.com/Genymobile/scrcpy/issues/6224>

Co-authored-by: Simon Chan <1330321+yume-chan@users.noreply.github.com>
2025-09-06 14:36:33 +02:00
Romain Vimont
afaca80b37 Fix virtual display after Android 16 upgrade
Several methods have been added upstream to IDisplayWindowListener.aidl,
causing an AbstractMethodError when they are called on the listener
instance implemented by scrcpy.

Fixes #6234 <https://github.com/Genymobile/scrcpy/issues/6234>
Fixes #6331 <https://github.com/Genymobile/scrcpy/issues/6331>
2025-09-06 14:19:43 +02:00
Filip Buda
8057835a0d Catch CTRL_BREAK_EVENT signal on Windows
This ensures the process can terminate properly when a CTRL_BREAK_EVENT
signal is sent programmatically.

PR #6244 <https://github.com/Genymobile/scrcpy/pull/6244>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-08-12 18:17:32 +02:00
Yan
e47529ab9c Fix gl_context declared type
The field gl_context is initialized from SDL_GL_CreateContext(), which
returns a raw SDL_GLContext, not a pointer.

The type mismatch was silently ignored by SDL2 because SDL_GLContext
was defined as an alias to `void *` (in SDL3, it is instead an alias to
`struct SDL_GLContextState *`, so compilation fails).

Refs #3895 <https://github.com/Genymobile/scrcpy/pull/3895>
PR #6259 <https://github.com/Genymobile/scrcpy/pull/6259>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-08-12 18:08:22 +02:00
Romain Vimont
939c8e7f68 Simplify settings access
For Android >= 12, scrcpy executed "settings" commands (in a new
process) rather than using the ContentProvider directly, due to
permission issues [1].

However, these permission issues were resolved by introducing
FakeContext.getContentResolver() [2].

Therefore, remove the use of "settings" commands and use the
ContentProvider directly in all cases.

Refs [1] cc0902b13c
Refs [2] 91373d906b
Refs #6224 comment <https://github.com/Genymobile/scrcpy/issues/6224#issuecomment-3078418268>
2025-07-17 18:27:21 +02:00
Romain Vimont
eb576c44f8 Replace __WINDOWS__ by _WIN32
Replace the SDL2-specific preprocessor macro __WINDOWS__ by the
"standard" _WIN32 macro.
2025-07-17 18:23:25 +02:00
Romain Vimont
0522d02d40 Add missing includes
The headers were implicitly included recursively, but include them
explicitly.
2025-07-17 18:23:12 +02:00
Romain Vimont
30bfc80f9b Fix style for 80-char limit 2025-07-17 13:20:45 +02:00
Romain Vimont
c3d2ef1b1f Remove redundant ninja install for GA macOS runner
The ninja package is already installed, so this triggered a warning:

> ninja 1.13.0 is already installed and up-to-date. To reinstall 1.13.0,
> run: brew reinstall ninja
2025-07-17 13:20:45 +02:00
Romain Vimont
a79ddc35a7 Update platform-tools checksums
The release binaries of platform-tools_r36.0.0 have changed upstream.

Both releases versions are referenced from
<https://dl.google.com/android/repository/repository2-2.xml>

Refs #6214 <https://github.com/Genymobile/scrcpy/issues/6214>
Refs <https://issuetracker.google.com/issues/431119334>
2025-07-17 13:20:45 +02:00
Romain Vimont
04542a9f58 Fix window leak on icon error 2025-07-17 13:19:15 +02:00
Romain Vimont
8761dcb7a8 Fix SDL dependency script error message
Commit 360936248c mistakenly left an
additional 'H' when replacing $HOST with $DIRNAME.

Refs <https://github.com/Genymobile/scrcpy/pull/6216#issuecomment-3076069802>
2025-07-16 19:09:47 +02:00
Romain Vimont
f01231dff8 Update links to 3.3.1 2025-06-20 20:14:42 +02:00
Romain Vimont
5b18ce0d2e Bump version to 3.3.1 2025-06-20 19:54:16 +02:00
Romain Vimont
4841fdd1ef Add horizontal scrolling support for HID mouse
PR #6172 <https://github.com/Genymobile/scrcpy/pull/6172>
2025-06-20 19:54:16 +02:00
Romain Vimont
fc75319bb2 Fix HID mouse support with SDL precise scrolling
Over HID, only integral scroll values can be sent. When SDL precise
scrolling is active, scroll events may include fractional values (e.g.,
0.05), which are truncated to 0 in the HID event.

To fix the problem, use the integral scroll value reported by SDL, which
internally accumulates fractional deltas.

Fixes #6156 <https://github.com/Genymobile/scrcpy/issues/6156>
PR #6172 <https://github.com/Genymobile/scrcpy/pull/6172>
2025-06-20 19:54:16 +02:00
Romain Vimont
7c8bdccbdc Extend value range for SDK mouse scrolling
SDL precise scrolling can sometimes produce values greater than 1 or
less than -1.

On the wire, the value is encoded as a 16-bit fixed-point number.

Previously, the range was interpreted as [-1, 1], using 1 bit for the
integral part (the sign) and 15 bits for the fractional part.

To support larger values, interpret the range as [-16, 16] instead,
using 5 bits for the integral part and 11 bits for the fractional part
(which is more than enough).

PR #6172 <https://github.com/Genymobile/scrcpy/pull/6172>
2025-06-20 19:54:16 +02:00
Romain Vimont
9787fe5d26 Preserve original scroll values in mouse event
Clamp scroll values to [-1, 1] only for the SDK mouse.

HID mouse implementations perform their own clamping to [-127, 127] (in
hid_mouse.c).

PR #6172 <https://github.com/Genymobile/scrcpy/pull/6172>
2025-06-20 18:30:50 +02:00
Romain Vimont
98d30288f7 Prepare the main looper earlier
The looper must be initialized before listing apps, to avoid the
following error:

> Can't create handler inside thread that has not called
> Looper.prepare()

Refs 283326b2f6
Fixes #6165 <https://github.com/Genymobile/scrcpy/issues/6165>
2025-06-17 21:08:54 +02:00
Romain Vimont
d74cfd5711 Silence DiscouragedPrivateApi lint warning 2025-06-13 09:40:45 +02:00
Romain Vimont
cd3a5d50b6 Create ClipboardManager from the main thread
The ClipboardManager is instantiated by the first call to
ServiceManager.getClipboardManager().

Now that scrcpy uses android.content.ClipboardManager directly, it must
ensure that it is created on the main thread (or at least on a thread
with a Looper), to avoid the following error:

> Can't create handler inside thread that has not called
> Looper.prepare()

Refs 8a02e3c2f5
Fixes #6151 <https://github.com/Genymobile/scrcpy/issues/6151>
2025-06-13 09:37:32 +02:00
Romain Vimont
772f42134a Use Context.CLIPBOARD_SERVICE directly
The constant is defined in Context, not FakeContext.
2025-06-13 09:37:32 +02:00
berk ziya
38256d8ff9 Fix deprecated brew command
`brew cask` is an outdated command, replaced by `brew install --cask`.

Refs #5398 <https://github.com/Genymobile/scrcpy/pull/5398>
PR #6149 <https://github.com/Genymobile/scrcpy/pull/6149>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-06-12 15:30:04 +02:00
Romain Vimont
4e1cf13a50 Run a main looper in the cleanup process
Since a main looper is explicitly run in the main process, the
initialization of workarounds no longer calls
Looper.prepareMainLooper(), leading to a crash:

    java.lang.RuntimeException: Can't create handler inside thread
    Thread[main,5,main] that has not called Looper.prepare()

As a result, --power-off-on-close was broken.

Refs 283326b2f6
Fixes #6146 <https://github.com/Genymobile/scrcpy/issues/6146>
2025-06-12 09:10:11 +02:00
Romain Vimont
696402c68c Update links to 3.3 2025-06-11 22:15:30 +02:00
Romain Vimont
dc169e425e Bump version to 3.3 2025-06-11 19:39:48 +02:00
Romain Vimont
13fc75902a Merge branch 'master' into release 2025-06-11 19:39:09 +02:00
Romain Vimont
454beaa757 Upgrade libusb (1.0.29) 2025-06-11 19:39:02 +02:00
Romain Vimont
1a9ffb3814 Upgrade SDL (2.32.8) 2025-06-11 19:38:29 +02:00
Romain Vimont
ac16be54c8 Upgrade platform-tools (36.0.0) 2025-06-11 19:36:22 +02:00
Romain Vimont
8a02e3c2f5 Simplify ClipboardManager wrapper
Use the public ClipboardManager API, with the FakeContext as context.

This requires a running main looper, otherwise clipboard changes are not
processed.

Refs #6009 <https://github.com/Genymobile/scrcpy/pull/6009>
PR #6129 <https://github.com/Genymobile/scrcpy/pull/6129>

Suggested by: Simon Chan <1330321+yume-chan@users.noreply.github.com>
2025-06-11 17:47:37 +02:00
Romain Vimont
283326b2f6 Run a main looper
Instead of blocking the main thread until completion, run a looper.

This will allow the main thread to process any event posted to the main
looper.

Refs #6009 comment <https://github.com/Genymobile/scrcpy/pull/6009#issuecomment-2940810736>
PR #6129 <https://github.com/Genymobile/scrcpy/pull/6129>
2025-06-11 17:47:07 +02:00
Simon Chan
ca4f50c5ef Associate UHID devices to virtual displays
This allows the mouse pointer to appear on the correct display (only for
devices running Android 15+).

Fixes #5547 <https://github.com/Genymobile/scrcpy/issues/5547>
PR #6009 <https://github.com/Genymobile/scrcpy/pull/6009>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-06-05 20:34:11 +02:00
Romain Vimont
7a3fe830d4 Synchronize access to DisplayManager
The DisplayManager and its method getDisplayInfo() may be used from both
the Controller thread and the video (main) thread.

PR #6009 <https://github.com/Genymobile/scrcpy/pull/6009>
2025-06-05 20:34:11 +02:00
Romain Vimont
ee414231ed Cache getDisplayInfo method
Do not use reflection to retrieve the method for every call.

PR #6009 <https://github.com/Genymobile/scrcpy/pull/6009>
2025-06-05 20:34:11 +02:00
Simon Chan
41ed40f5f9 Simplify InputManager wrapper
Use the public InputManager API.

PR #6009 <https://github.com/Genymobile/scrcpy/pull/6009>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-06-05 20:34:11 +02:00
Colin Kinloch
d2cc930975 Add app name SDL hint
This allows pulseaudio to label the audio stream "scrcpy" rather than
"SDL Application".

PR #6107 <https://github.com/Genymobile/scrcpy/pull/6107>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-06-05 19:59:59 +02:00
Romain Vimont
52f5d08d1f Avoid calling wait(0)
Calling wait(0) results in waiting without a timeout, which is
unintended.

Refs #6009 comment <https://github.com/Genymobile/scrcpy/pull/6009#issuecomment-2935930294>
2025-06-03 21:15:11 +02:00
Romain Vimont
70bfa2cf39 Remove useless flag in zsh completion script
The -N flag is only useful after a pattern section (-p) to switch back
to listing command names.

Refs <https://zsh.sourceforge.io/Doc/Release/Completion-System.html>
2025-05-22 20:00:58 +02:00
hltdev8642
38f779d9d3 Escape parentheses in zsh completion script
PR #6079 <https://github.com/Genymobile/scrcpy/pull/6079>

Co-authored-by: Romain Vimont <rom@rom1v.com>
Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-05-22 20:00:53 +02:00
Romain Vimont
8cd63cb63e Report specific error for INJECT_EVENT permission
Some devices require a specific option to be enabled in Developer
Options to avoid a permission issue when injecting input events.

When this error occurs, hide the stack trace and print a human-readable
message explaining how to fix the issue.

PR #6080 <https://github.com/Genymobile/scrcpy/pull/6080>
2025-05-15 19:52:52 +02:00
Romain Vimont
cc309a2b34 Build static linux binary on Ubuntu 22.04
Ubuntu 20.04 is no longer available on GitHub Actions.

Refs <https://github.com/actions/runner-images/issues/11101>
Refs #6050 <https://github.com/Genymobile/scrcpy/pull/6050>

This reverts commit 69858c6f43.
2025-05-02 11:39:47 +02:00
Romain Vimont
91a4a74641 Move regex pattern initialization
If text == null, then the Pattern is not used.
2025-04-25 10:24:07 +02:00
Romain Vimont
48f38c4bb6 Fix default locked capture orientation
The default landscape locked orientation was reversed.

Fixes #6010 <https://github.com/Genymobile/scrcpy/issues/6010>
2025-04-24 16:12:28 +02:00
Romain Vimont
6875e9aa88 Revert "Fix AudioRecord package name for Android 16"
This reverts commit c27d116a66.

This commit breaks audio on Android 16 beta 4.

Refs #5960 comment <https://github.com/Genymobile/scrcpy/issues/5960#issuecomment-2816608015>
Fixes #6021 <https://github.com/Genymobile/scrcpy/issues/6021>
2025-04-24 16:05:13 +02:00
Nicholas Wilson
c5ed2cfc28 Replace "licence" with "license" in README
Although "licence" is correct in British English, the rest of the
statement uses "license," so change it for consistency.

PR #6017 <https://github.com/Genymobile/scrcpy/pull/6017>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-04-19 10:30:29 +02:00
Romain Vimont
1a0d300786 Add missing --screen-off-timeout doc in manpage
Refs eff5b4b219
2025-04-14 18:07:37 +02:00
Romain Vimont
d2447b5c19 Fix --screen-off-timeout bash completion
Only the option must be auto-completed, not its value.
2025-04-14 18:05:08 +02:00
Romain Vimont
5900e9e39c Remove irrelevant link in FAQ 2025-04-07 10:30:56 +02:00
Romain Vimont
882003f314 Fix segfault on SDL event without window
Since #5804, controls have been enabled even with --no-window. As a
result, the Android clipboard is synchronized with the computer, causing
SDL to trigger an SDL_CLIPBOARDUPDATE event.

This event is ignored by scrcpy, but it was still transmitted to the
sc_screen instance, even if it had not been initialized.

Fix the issue by calling sc_screen_handle_event() only when a screen
instance exists.

Refs #5804 <https://github.com/Genymobile/scrcpy/pull/5804>
Fixes #5970 <https://github.com/Genymobile/scrcpy/issues/5970>
2025-04-03 08:15:55 +02:00
Romain Vimont
db9dc6ae83 Make the snap version as obsolete
The version of scrcpy packaged in snap is currently 1.25.

Refs <https://snapcraft.io/scrcpy>
2025-04-01 11:04:34 +02:00
Romain Vimont
e0f37f834b Update links to 3.2 2025-03-29 16:15:14 +01:00
Romain Vimont
89b624770c Bump version to 3.2 2025-03-29 15:45:28 +01:00
Romain Vimont
79227af89f Merge branch 'master' into release 2025-03-29 15:44:29 +01:00
Romain Vimont
5d12d9071d Upgrade FFmpeg (7.1.1) 2025-03-29 15:34:48 +01:00
Romain Vimont
b7add42154 Upgrade SDL (2.32.2)
Also apply this additional patch to fix the build:
<6be87ceb33>
2025-03-29 15:34:20 +01:00
Romain Vimont
dd1bfae4e0 Upgrade libusb (1.0.28) 2025-03-29 15:02:38 +01:00
Romain Vimont
bef2d8473b Add more audio sources
Expose more audio sources from MediaRecorder.AudioSource.

Refs <https://developer.android.com/reference/android/media/MediaRecorder.AudioSource>

Fixes #5412 <https://github.com/Genymobile/scrcpy/issues/5412>
Fixes #5670 <https://github.com/Genymobile/scrcpy/issues/5670>
PR #5870 <https://github.com/Genymobile/scrcpy/pull/5870>
2025-03-29 14:54:35 +01:00
Romain Vimont
609719bde0 Refactor audio sources
Store the target audio source integer (one of the constants from
android.media.MediaRecorder.AudioSource) in the AudioSource enum (or -1
if not relevant).

This will simplify adding new audio sources.

PR #5870 <https://github.com/Genymobile/scrcpy/pull/5870>
2025-03-29 14:54:35 +01:00
Romain Vimont
3a0703f428 Handle audio stream discontinuities
The audio regulator assumed a continuous audio stream. But some audio
sources (like the "voice call" audio source) do not produce any packets
on silence, breaking this assumption.

Use PTS to detect such discontinuities.

PR #5870 <https://github.com/Genymobile/scrcpy/pull/5870>
2025-03-29 14:54:35 +01:00
Romain Vimont
245981281e Fix PTS produced by the default opus/flac encoders
The default OPUS and FLAC encoders on Android rewrite the input PTS so
that they exactly match the number of samples.

As a consequence:
 - audio clock drift is not compensated
 - implicit silences (without packets) are ignored

To work around this behavior, generate new PTS based on the current time
(after encoding) and the packet duration.

PR #5870 <https://github.com/Genymobile/scrcpy/pull/5870>
2025-03-29 14:45:05 +01:00
Romain Vimont
1d25338119 Report underflow samples in verbose mode
Report the number of silence samples inserted due to underflow every
second, along with the other metrics.

PR #5870 <https://github.com/Genymobile/scrcpy/pull/5870>
2025-03-29 14:40:52 +01:00
Romain Vimont
457c7fe5cf Disable audio regulator underflow logs
Only enable them if SC_AUDIO_REGULATOR_DEBUG is set, as they may spam
the output.

PR #5870 <https://github.com/Genymobile/scrcpy/pull/5870>
2025-03-29 14:39:43 +01:00
Romain Vimont
7998811fa5 Mention that no Android app is required 2025-03-09 21:16:17 +01:00
Romain Vimont
7044122fc5 Simplify wording in README 2025-03-09 21:10:21 +01:00
Romain Vimont
c63d9e1803 Work around broken display listener on Android 15
A recent Android 15 upgrade broke the display listener (again). Use the
alternative method for Android >= 14.

Fixes #5908 <https://github.com/Genymobile/scrcpy/issues/5908>
2025-03-07 18:40:28 +01:00
Romain Vimont
d892a9aac5 Disable checkstyle line length warning
Checkstyle reports a warning because the line containing a long URL is
more than 150 characters. But we can't split the URL, so disable the
warning.
2025-02-22 12:22:45 +01:00
chengjian.scj
fd8bef68b7 Add --display-ime-policy option
Add an option to select where the IME should be displayed.

Possible values are "local", "fallback" and "hide".

PR #5703 <https://github.com/Genymobile/scrcpy/pull/5703>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-02-22 11:05:22 +01:00
Sam Listopad II
986328ff9e Allow controls with --no-window
Without a window, mouse and keyboard events may not be received, but
the control channel is still necessary for other features:

 * --turn-screen-off
 * --stay-awake
 * --show-touches
 * --power-off-on-close
 * --start-app

Fixes #5803 <https://github.com/Genymobile/scrcpy/issues/5803>
PR #5804 <https://github.com/Genymobile/scrcpy/pull/5804>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-01-31 10:11:17 +01:00
Romain Vimont
0ba9d35705 Mention virtual display destruction
The new virtual display does not persist after scrcpy exits.
2025-01-15 10:54:57 +01:00
Romain Vimont
cac8e9c821 Happy new year 2025! 2025-01-01 15:01:18 +01:00
Jaime J. Denizard
1c7680f689 Fix some grammatical issues in documentation
PR #5722 <https://github.com/Genymobile/scrcpy/pull/5722>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2025-01-01 14:59:11 +01:00
Simon Chan
c27d116a66 Fix AudioRecord package name for Android 16
Since commit 9f91a5eebb4520b9333576e946b3911d0f946a04 in frameworks/av
(AOSP), an AudioRecord can be created only if the declared package name
in the AttributionSource is "shell" (for the shell UID):
 - <7c4e6991ac/services/audiopolicy/permission/NativePermissionController.cpp (129)>
 - <7c4e6991ac/services/audiopolicy/permission/NativePermissionController.cpp (40)>

Refs <9f91a5eebb%5E%21/>
Fixes #5698 <https://github.com/Genymobile/scrcpy/issues/5698>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2024-12-23 19:41:25 +01:00
Romain Vimont
eac711ace6 Remove unused rotation and fold listeners
IRotationWatcher and IDisplayFoldListener are no longer used since
commit 39d51ff2cc.
2024-12-23 12:51:27 +01:00
Romain Vimont
af15c72f9c Cleanup includes
Improved manually with the help of neovim LSP warnings and iwyu:

    iwyu -Ibuilddir/app/ -Iapp/src/ app/src/XXX.c
2024-12-23 12:19:47 +01:00
Simon Chan
5b1229a55f Support older macOS versions in CI build
Fixes #5649 <https://github.com/Genymobile/scrcpy/issues/5649>
Fixes #5697<https://github.com/Genymobile/scrcpy/pull/5697>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2024-12-23 11:58:06 +01:00
Romain Vimont
69858c6f43 Build static linux binary on Ubuntu 20.04
Use the oldest Ubuntu version currently available in GitHub Actions to
ensure maximum compatibility with older systems.

Refs 95c4f03c1b
Refs #5689 <https://github.com/Genymobile/scrcpy/issues/5689>
2024-12-23 11:01:42 +01:00
Romain Vimont
e0423653c8 Remove useless null check
The method CameraManager.getCameraIdList() is annotated with @NonNull.

This fixes a warning reported by Android Studio.
2024-12-23 10:58:59 +01:00
Romain Vimont
5387644160 Ignore low-FPS ranges if not available
Do not report an error if the returned FPS ranges array is null.

Refs #5669 <https://github.com/Genymobile/scrcpy/pull/5669>
2024-12-22 21:17:51 +01:00
Simon Chan
2f44da76f4 Filter out non-backward-compatible cameras
PR #5669 <https://github.com/Genymobile/scrcpy/pull/5669>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2024-12-22 21:17:05 +01:00
Romain Vimont
95c4f03c1b Build static linux binary on Ubuntu 22.04
On Github Actions, ubuntu-latest now points to ubuntu-24.04, which uses
a newer version of glibc (2.39). As a result, the binaries fail to work
on systems with older versions of glibc, such as Debian Bookworm.

To ensure better compatibility, continue building the static Linux
binary on Ubuntu 22.04 (with glibc 2.35).

Fixes #5689 <https://github.com/Genymobile/scrcpy/issues/5689>
2024-12-22 15:49:46 +01:00
Romain Vimont
fb47b87eeb Fix pipe read return value
The function incorrectly returned false, whereas its return type is
ssize_t.
2024-12-20 20:57:20 +01:00
Markus
5ae01749bf Reintroduce WinGet install note
This semantically reverts c27ab46efb.

WinGet package has been fixed by:
<https://github.com/microsoft/winget-pkgs/pull/196442>

Refs #4027 <https://github.com/Genymobile/scrcpy/issues/4027>
PR #5686 <https://github.com/Genymobile/scrcpy/pull/5686>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2024-12-19 18:34:20 +01:00
Romain Vimont
1fd57ede1f Move "screen off timeout" section in documentation
Place the "screen off timeout" section right after "stay awake", as they
serve a similar purpose.
2024-12-17 13:09:24 +01:00
Romain Vimont
48fc18e380 Add must-know tips
All users should be aware of the main shortcuts and the most important
setting to improve performance.
2024-12-17 12:24:50 +01:00
Romain Vimont
ea6a94d355 Fix mouse documentation formatting
Make the format consistent with the shortcuts documentation.
2024-12-17 12:21:57 +01:00
Romain Vimont
dc2fcc46f5 Add workaround for Pico 4 Ultra
Make ActivityThread.isSystem() return true to avoid a
NullPointerException later.

Refs #5659 comment <https://github.com/Genymobile/scrcpy/issues/5659#issuecomment-2540963953>
Fixes #5659 <https://github.com/Genymobile/scrcpy/issues/5659>
2024-12-14 10:27:38 +01:00
Romain Vimont
69264703b1 Add missing comments in workarounds
The implementation of workarounds uses a lot of reflection code. For
better readability, always write the equivalent using direct Java code.
2024-12-14 10:27:38 +01:00
Colin Kinloch
ec4e826976 Set icon and server env paths for meson devenv
This allows users to compile and run the project in a dev environment.

    meson setup x
    meson compile -C x
    meson devenv -C x
    scrcpy

This is an alternative to `./run x`.

PR #5658 <https://github.com/Genymobile/scrcpy/pull/5658>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2024-12-12 18:15:26 +01:00
Romain Vimont
17e205e54f Replace meson join_paths() by '/'
A new '/' operator was introduced in Meson 0.49 to replace join_paths():
 - <https://mesonbuild.com/Reference-manual_functions.html#join_paths>
 - <https://mesonbuild.com/Syntax.html#string-path-building>

Refs #5658 <https://github.com/Genymobile/scrcpy/pull/5658>
2024-12-12 18:15:26 +01:00
Romain Vimont
f751274b17 Define both pkg-config and pkgconfig for meson
In Meson cross-files, "pkgconfig" was deprecated in favor of
"pkg-config" in meson 1.3.0.

The new name is used since 85a94dd4b5 to
avoid a warning, but then it fails with older versions of meson.

To avoid the problem, define both pkg-config and pkgconfig.

> For backward compatibility it is still allowed to define both with the
> same value, in that case no deprecation warning is printed.

<https://mesonbuild.com/Release-notes-for-1-3-0.html#machine-files-pkgconfig-field-deprecated-and-replaced-by-pkgconfig>
2024-12-12 18:09:31 +01:00
Romain Vimont
6469054b15 Revert "Remove apt update on GitHub Actions"
This reverts commit 678025b316.

This avoids spurious errors on the CI:

    E: Unable to fetch some archives, maybe run apt-get update or try
    with --fix-missing?
2024-12-12 18:09:31 +01:00
Romain Vimont
0e2d084751 Update links to 3.1 2024-12-09 22:42:34 +01:00
Romain Vimont
754f4fc6fe Bump version to 3.1 2024-12-09 22:29:51 +01:00
Romain Vimont
aca6d30af5 Include dav1d in releases
Scrcpy supports AV1, but no decoder was provided in binary releases.

Include dav1d:
 - <https://www.videolan.org/projects/dav1d.html>
 - <https://code.videolan.org/videolan/dav1d>

Fixes #4744 <https://github.com/Genymobile/scrcpy/issues/4744>
PR #5644 <https://github.com/Genymobile/scrcpy/pull/5644>
2024-12-09 19:07:18 +01:00
Romain Vimont
f2018e026c Remove broken macOS flags
Due to a typo (a space was missing before the second '-L'), the
resulting LDFLAGS value was broken:

    "-L/opt/homebrew/opt/zlib/lib-L/opt/homebrew/opt/libiconv/lib"

This proves that the flag was useless. Remove it.

Refs #5517 comment <https://github.com/Genymobile/scrcpy/pull/5517#issuecomment-2495522201>
PR #5644 <https://github.com/Genymobile/scrcpy/pull/5644>
2024-12-09 19:07:03 +01:00
Simon Chan
a507b4f559 Fix DisplayControl classpath
Use the full system server classpath to load DisplayControl, so that
turning the screen off on Android 14+ does not crash on certain devices.

Refs #4544 comment <https://github.com/Genymobile/scrcpy/issues/4544#issuecomment-2526999714>
Fixes #4544 <https://github.com/Genymobile/scrcpy/issues/4544>
Fixes #5274 <https://github.com/Genymobile/scrcpy/issues/5274>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2024-12-09 10:29:20 +01:00
Romain Vimont
a9aadc95df Start cleanup process with setsid()
Reimplement c59a3c3169 using Os.setsid().

Refs #5613 comment <https://github.com/Genymobile/scrcpy/pull/5613#issuecomment-2527045669>

Suggested-by: Simon Chan <1330321+yume-chan@users.noreply.github.com>
2024-12-09 09:33:08 +01:00
Romain Vimont
28b5bfb90e Revert "Start cleanup process with setsid or nohup"
This reverts commit c59a3c3169.

The next commit will use Os.setsid() instead.
2024-12-09 09:29:29 +01:00
Romain Vimont
65256d7cc7 Upgrade SDL (2.30.10) 2024-12-08 18:17:07 +01:00
Romain Vimont
328bb74f80 Log gamepad added/removed
Add a log when a gamepad is added or removed.

PR #5623 <https://github.com/Genymobile/scrcpy/pull/5623>
2024-12-08 18:16:57 +01:00
Withoutruless
7418fd0662 Use Xbox 360 gamepad name
Some games do not work without a known gamepad name.

Fixes #5362 <https://github.com/Genymobile/scrcpy/issues/5362>
Refs #5623 comment <https://github.com/Genymobile/scrcpy/pull/5623#issuecomment-2525685323>
PR #5623 <https://github.com/Genymobile/scrcpy/pull/5623>

Signed-off-by: Romain Vimont <rom@rom1v.com>
2024-12-08 17:01:03 +01:00
Romain Vimont
0a09518a49 Use Xbox 360 gamepad USB ids
Use the vendorId and productId of an Xbox 360 controller for better
support (the HID gamepad protocol used in scrcpy is similar to that of
the Xbox 360 controller).

Fixes #5362 <https://github.com/Genymobile/scrcpy/issues/5362>
PR #5623 <https://github.com/Genymobile/scrcpy/pull/5623>
2024-12-08 11:00:18 +01:00
Romain Vimont
27a5934a1d Define UHID vendorId and productId from the client
Let the client choose the USB ids, that it transmits in UHID_CREATE
requests.

PR #5623 <https://github.com/Genymobile/scrcpy/pull/5623>
2024-12-08 11:00:18 +01:00
Romain Vimont
86a68fac6c Fix gamepad axis initial values
By default, initialize axis to 0, which is represented by 0x8000 as a
16-bit unsigned value.

PR #5623 <https://github.com/Genymobile/scrcpy/pull/5623>
2024-12-08 11:00:18 +01:00
Romain Vimont
1786f28e6f Fix gamepad HID descriptor
Use Z and Rz for L2/R2, which are more widely supported than
Brake/Accelerator.

The right stick must then be bound to Rx and Ry.

Fixes #5362 <https://github.com/Genymobile/scrcpy/issues/5362>
PR #5623 <https://github.com/Genymobile/scrcpy/pull/5623>
2024-12-08 11:00:18 +01:00
Romain Vimont
9cf4d52721 Fix HID gamepad comments
PR #5623 <https://github.com/Genymobile/scrcpy/pull/5623>
2024-12-08 11:00:18 +01:00
Romain Vimont
4bd1c5981d Split gamepad device added/removed events
Use two separate callbacks for gamepad device added and gamepad device
removed.

It looks cleaner.

PR #5623 <https://github.com/Genymobile/scrcpy/pull/5623>
2024-12-08 11:00:18 +01:00
Romain Vimont
c59a3c3169 Start cleanup process with setsid or nohup
If available, start the cleanup process in a new session to reduce the
likelihood of it being terminated along with the scrcpy server process
on some devices.

The binaries setsid and nohup are often available, but it is not
guaranteed.

Refs #5601 <https://github.com/Genymobile/scrcpy/issues/5601>
PR #5613 <https://github.com/Genymobile/scrcpy/pull/5613>
2024-12-08 10:58:22 +01:00
Romain Vimont
2780e0bd7b Do not interrupt cleanup configuration
Some options, such as --show-touches or --stay-awake, modify Android
settings and must be restored upon exit.

If scrcpy terminates (e.g. due to an early error) in the middle of the
clean up configuration, the device may be left in an inconsistent state
(some settings might be changed but not restored).

This issue can be reproduced with high probability by forcing scrcpy to
fail:

    scrcpy --show-touches --video-encoder=fail

To prevent this problem, ensure that the clean up thread is not
interrupted until the clean up process is started.

Refs #5601 <https://github.com/Genymobile/scrcpy/issues/5601>
PR #5613 <https://github.com/Genymobile/scrcpy/pull/5613>
2024-12-08 10:58:07 +01:00
Romain Vimont
6c6607d404 Add --no-vd-destroy-content
Add an option to disable the following flag for virtual displays:

    DisplayManager.VIRTUAL_DISPLAY_FLAG_DESTROY_CONTENT_ON_REMOVAL

With this option, when the virtual display is closed, the running apps
are moved to the main display rather than being destroyed.

PR #5615 <https://github.com/Genymobile/scrcpy/pull/5615>
2024-12-08 09:33:03 +01:00
Romain Vimont
988174805c Fix boolean assignment
On --no-vd-system-decoration, the boolean option must be set to false.

It was wrongly assigned from optarg (this worked because optarg is NULL
at this point, so it was converted to false).

PR #5615 <https://github.com/Genymobile/scrcpy/pull/5615>
2024-12-08 09:26:53 +01:00
Romain Vimont
f90dc216d1 Refactor virtual display properties initialization
Following the changes from the previous commit, the behavior is now
identical when mirroring the main display or using the SurfaceControl
API.

Factorize the code to perform the initialization in a single location.

Refs #5605 <https://github.com/Genymobile/scrcpy/issues/5605>
PR #5614 <https://github.com/Genymobile/scrcpy/pull/5614>
2024-12-07 20:09:14 +01:00
Romain Vimont
97fa77c76c Inject main display events to the original display
When mirroring a secondary display, touch and scroll events must be sent
to the mirroring virtual display id (with coordinates relative to the
virtual display size), rather than to the original display (with
coordinates relative to the original display size).

This behavior, introduced by d19396718e,
was also applied for the main display for consistency. However, it
causes some UI elements to become unclickable.

To minimize inconveniences, restore the previous behavior when mirroring
the main display: send all events to the original display id (0) with
coordinates relative to the original display size.

Fixes #5545 <https://github.com/Genymobile/scrcpy/issues/5545>
Fixes #5605 <https://github.com/Genymobile/scrcpy/issues/5605>
Fixes #5616 <https://github.com/Genymobile/scrcpy/issues/5616>
Refs #4598 <https://github.com/Genymobile/scrcpy/issues/4598>
Refs #5137 <https://github.com/Genymobile/scrcpy/issues/5137>
Refs #5370 <https://github.com/Genymobile/scrcpy/pull/5370>
PR #5614 <https://github.com/Genymobile/scrcpy/pull/5614>
2024-12-07 20:08:49 +01:00
Romain Vimont
baa10ed0a3 Update links to 3.0.2 2024-12-04 22:48:27 +01:00
Romain Vimont
2ed2247e8f Bump version to 3.0.2
The version was not bumped for 3.0.1.
2024-12-04 22:35:25 +01:00
Romain Vimont
5febb1e9fb Update links to 3.0.1 2024-12-04 21:46:06 +01:00
Romain Vimont
5c3626ed47 Handle broken pipe errors specifically
Since 9555d3a537, a capture/encoding error
was sometimes logged on exit.
2024-12-04 18:38:23 +01:00
Romain Vimont
0e473eb005 Reset TCP/IP connection with a '+' prefix
When running scrcpy with --tcpip=xx.xx.xx.xx, to make sure a new working
connection is established, it was first disconnected by a call to:

    adb disconnect <addr>

However, this caused all running instances connected to that address to
be killed. Running several instances of scrcpy on the same device is now
useful with virtual displays, so change the default behavior to NOT
disconnect.

To force a reconnection, a '+' prefix can be added:

    scrcpy --tcpip=+192.168.0.x

Fixes #5562 <https://github.com/Genymobile/scrcpy/issues/5562>
2024-12-04 13:16:51 +01:00
Romain Vimont
b26b4fb745 Document launchers in virtual displays
Mention how to start a launcher in a virtual display.

Refs #5592 <https://github.com/Genymobile/scrcpy/issues/5592>
2024-12-04 13:10:35 +01:00
Romain Vimont
9555d3a537 Retry capture on IOException
If the capture fails with an IOException, retry with a lower resolution.

Fixes #5539 <https://github.com/Genymobile/scrcpy/issues/5539>
2024-12-03 23:06:33 +01:00
206 changed files with 3822 additions and 2266 deletions

View File

@@ -74,16 +74,25 @@ jobs:
- name: Install dependencies
run: |
sudo apt update
sudo apt install -y meson ninja-build nasm ffmpeg libsdl2-2.0-0 \
libsdl2-dev libavcodec-dev libavdevice-dev libavformat-dev \
libavutil-dev libswresample-dev libusb-1.0-0 libusb-1.0-0-dev \
libv4l-dev
# SDL3 is not available in Ubuntu yet
- name: Install SDL3
run: |
app/deps/sdl.sh linux native shared
- name: Test
run: release/test_client.sh
run: |
export PKG_CONFIG_PATH="$PWD"/app/deps/work/install/linux-native-shared/lib/pkgconfig
export LD_LIBRARY_PATH="$PWD"/app/deps/work/install/linux-native-shared/lib
release/test_client.sh
build-linux-x86_64:
runs-on: ubuntu-latest
runs-on: ubuntu-22.04
steps:
- name: Check architecture
run: |
@@ -99,6 +108,7 @@ jobs:
- name: Install dependencies
run: |
sudo apt update
sudo apt install -y meson ninja-build nasm ffmpeg libsdl2-2.0-0 \
libsdl2-dev libavcodec-dev libavdevice-dev libavformat-dev \
libavutil-dev libswresample-dev libusb-1.0-0 libusb-1.0-0-dev \
@@ -129,14 +139,12 @@ jobs:
- name: Install dependencies
run: |
sudo apt update
sudo apt install -y meson ninja-build nasm ffmpeg libsdl2-2.0-0 \
libsdl2-dev libavcodec-dev libavdevice-dev libavformat-dev \
libavutil-dev libswresample-dev libusb-1.0-0 libusb-1.0-0-dev \
mingw-w64 mingw-w64-tools libz-mingw-w64-dev
- name: Workaround for old meson version run by Github Actions
run: sed -i 's/^pkg-config/pkgconfig/' cross_win32.txt
- name: Build
run: release/build_windows.sh 32
@@ -162,14 +170,12 @@ jobs:
- name: Install dependencies
run: |
sudo apt update
sudo apt install -y meson ninja-build nasm ffmpeg libsdl2-2.0-0 \
libsdl2-dev libavcodec-dev libavdevice-dev libavformat-dev \
libavutil-dev libswresample-dev libusb-1.0-0 libusb-1.0-0-dev \
mingw-w64 mingw-w64-tools libz-mingw-w64-dev
- name: Workaround for old meson version run by Github Actions
run: sed -i 's/^pkg-config/pkgconfig/' cross_win64.txt
- name: Build
run: release/build_windows.sh 64
@@ -204,10 +210,16 @@ jobs:
- name: Install dependencies
run: |
brew install meson ninja nasm libiconv zlib automake autoconf \
libtool
brew install meson nasm libiconv zlib automake autoconf libtool
- name: Build
env:
# the default Xcode (and macOS SDK) version can be found at
# <https://github.com/actions/runner-images/blob/main/images/macos/macos-15-Readme.md#xcode>
#
# then the minimal supported deployment target of that macOS SDK can be found at
# <https://developer.apple.com/support/xcode/#minimum-requirements>
MACOSX_DEPLOYMENT_TARGET: 10.13
run: release/build_macos.sh aarch64
# upload-artifact does not preserve permissions
@@ -240,10 +252,17 @@ jobs:
uses: actions/checkout@v4
- name: Install dependencies
run: brew install meson ninja nasm libiconv zlib automake
run: brew install meson nasm libiconv zlib automake
# autoconf and libtool are already installed on macos-13
- name: Build
env:
# the default Xcode (and macOS SDK) version can be found at
# <https://github.com/actions/runner-images/blob/main/images/macos/macos-13-Readme.md#xcode>
#
# then the minimal supported deployment target of that macOS SDK can be found at
# <https://developer.apple.com/support/xcode/#minimum-requirements>
MACOSX_DEPLOYMENT_TARGET: 10.13
run: release/build_macos.sh x86_64
# upload-artifact does not preserve permissions

5
FAQ.md
View File

@@ -166,14 +166,13 @@ Rebooting the device is necessary once this option is set.
### Special characters do not work
The default text injection method is [limited to ASCII characters][text-input].
A trick allows to also inject some [accented characters][accented-characters],
The default text injection method is limited to ASCII characters. A trick allows
to also inject some [accented characters][accented-characters],
but that's all. See [#37].
To avoid the problem, [change the keyboard mode to simulate a physical
keyboard][hid].
[text-input]: https://github.com/Genymobile/scrcpy/issues?q=is%3Aopen+is%3Aissue+label%3Aunicode
[accented-characters]: https://blog.rom1v.com/2018/03/introducing-scrcpy/#handle-accented-characters
[#37]: https://github.com/Genymobile/scrcpy/issues/37
[hid]: doc/keyboard.md#physical-keyboard-simulation

View File

@@ -188,7 +188,7 @@
identification within third-party archives.
Copyright (C) 2018 Genymobile
Copyright (C) 2018-2024 Romain Vimont
Copyright (C) 2018-2025 Romain Vimont
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.

View File

@@ -2,16 +2,16 @@
source for the project. Do not download releases from random websites, even if
their name contains `scrcpy`.**
# scrcpy (v3.0)
# scrcpy (v3.3.3)
<img src="app/data/icon.svg" width="128" height="128" alt="scrcpy" align="right" />
_pronounced "**scr**een **c**o**py**"_
This application mirrors Android devices (video and audio) connected via
USB or [over TCP/IP](doc/connection.md#tcpip-wireless), and allows to control the
device with the keyboard and the mouse of the computer. It does not require any
_root_ access. It works on _Linux_, _Windows_ and _macOS_.
This application mirrors Android devices (video and audio) connected via USB or
[TCP/IP](doc/connection.md#tcpip-wireless) and allows control using the
computer's keyboard and mouse. It does not require _root_ access or an app
installed on the device. It works on _Linux_, _Windows_, and _macOS_.
![screenshot](assets/screenshot-debian-600.jpg)
@@ -58,7 +58,7 @@ Make sure you [enabled USB debugging][enable-adb] on your device(s).
On some devices (especially Xiaomi), you might get the following error:
```
java.lang.SecurityException: Injecting input events requires the caller (or the source of the instrumentation, if any) to have the INJECT_EVENTS permission.
Injecting input events requires the caller (or the source of the instrumentation, if any) to have the INJECT_EVENTS permission.
```
In that case, you need to enable [an additional option][control] `USB debugging
@@ -78,6 +78,16 @@ Note that USB debugging is not required to run scrcpy in [OTG mode](doc/otg.md).
- [macOS](doc/macos.md)
## Must-know tips
- [Reducing resolution](doc/video.md#size) may greatly improve performance
(`scrcpy -m1024`)
- [_Right-click_](doc/mouse.md#mouse-bindings) triggers `BACK`
- [_Middle-click_](doc/mouse.md#mouse-bindings) triggers `HOME`
- <kbd>Alt</kbd>+<kbd>f</kbd> toggles [fullscreen](doc/window.md#fullscreen)
- There are many other [shortcuts](doc/shortcuts.md)
## Usage examples
There are a lot of options, [documented](#user-documentation) in separate pages.
@@ -197,10 +207,10 @@ work][donate]:
[donate]: https://blog.rom1v.com/about/#support-my-open-source-work
## Licence
## License
Copyright (C) 2018 Genymobile
Copyright (C) 2018-2024 Romain Vimont
Copyright (C) 2018-2025 Romain Vimont
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.

View File

@@ -18,11 +18,13 @@ _scrcpy() {
--camera-fps=
--camera-high-speed
--camera-size=
--camera-torch
--capture-orientation=
--crop=
-d --select-usb
--disable-screensaver
--display-id=
--display-ime-policy=
--display-orientation=
-e --select-tcpip
-f --fullscreen
@@ -57,6 +59,7 @@ _scrcpy() {
--no-mipmaps
--no-mouse-hover
--no-power-on
--no-vd-destroy-content
--no-vd-system-decorations
--no-video
--no-video-playback
@@ -120,7 +123,7 @@ _scrcpy() {
return
;;
--audio-source)
COMPREPLY=($(compgen -W 'output mic playback' -- "$cur"))
COMPREPLY=($(compgen -W 'output playback mic mic-unprocessed mic-camcorder mic-voice-recognition mic-voice-communication voice-call voice-call-uplink voice-call-downlink voice-performance' -- "$cur"))
return
;;
--camera-facing)
@@ -147,6 +150,10 @@ _scrcpy() {
COMPREPLY=($(compgen -W '0 90 180 270 flip0 flip90 flip180 flip270' -- "$cur"))
return
;;
--display-ime-policy)
COMPREPLY=($(compgen -W 'local fallback hide' -- "$cur"))
return
;;
--record-orientation)
COMPREPLY=($(compgen -W '0 90 180 270' -- "$cur"))
return
@@ -191,6 +198,7 @@ _scrcpy() {
|--camera-id \
|--camera-fps \
|--camera-size \
|--camera-torch \
|--crop \
|--display-id \
|--max-fps \
@@ -199,6 +207,7 @@ _scrcpy() {
|-p|--port \
|--push-target \
|--rotation \
|--screen-off-timeout \
|--tunnel-host \
|--tunnel-port \
|--v4l2-buffer \

View File

@@ -1,4 +1,4 @@
#compdef -N scrcpy -N scrcpy.exe
#compdef scrcpy scrcpy.exe
#
# name: scrcpy
# auth: hltdev [hltdev8642@gmail.com]
@@ -11,12 +11,12 @@ arguments=(
'--always-on-top[Make scrcpy window always on top \(above other windows\)]'
'--angle=[Rotate the video content by a custom angle, in degrees]'
'--audio-bit-rate=[Encode the audio at the given bit-rate]'
'--audio-buffer=[Configure the audio buffering delay (in milliseconds)]'
'--audio-buffer=[Configure the audio buffering delay \(in milliseconds\)]'
'--audio-codec=[Select the audio codec]:codec:(opus aac flac raw)'
'--audio-codec-options=[Set a list of comma-separated key\:type=value options for the device audio encoder]'
'--audio-dup=[Duplicate audio]'
'--audio-encoder=[Use a specific MediaCodec audio encoder]'
'--audio-source=[Select the audio source]:source:(output mic playback)'
'--audio-source=[Select the audio source]:source:(output playback mic mic-unprocessed mic-camcorder mic-voice-recognition mic-voice-communication voice-call voice-call-uplink voice-call-downlink voice-performance)'
'--audio-output-buffer=[Configure the size of the SDL audio output buffer (in milliseconds)]'
{-b,--video-bit-rate=}'[Encode the video at the given bit-rate]'
'--camera-ar=[Select the camera size by its aspect ratio]'
@@ -25,19 +25,21 @@ arguments=(
'--camera-facing=[Select the device camera by its facing direction]:facing:(front back external)'
'--camera-fps=[Specify the camera capture frame rate]'
'--camera-size=[Specify an explicit camera capture size]'
'--camera-torch[Turn on the camera torch when the camera starts]'
'--capture-orientation=[Set the capture video orientation]:orientation:(0 90 180 270 flip0 flip90 flip180 flip270 @0 @90 @180 @270 @flip0 @flip90 @flip180 @flip270)'
'--crop=[\[width\:height\:x\:y\] Crop the device screen on the server]'
{-d,--select-usb}'[Use USB device]'
'--disable-screensaver[Disable screensaver while scrcpy is running]'
'--display-id=[Specify the display id to mirror]'
'--display-ime-policy[Set the policy for selecting where the IME should be displayed]'
'--display-orientation=[Set the initial display orientation]:orientation values:(0 90 180 270 flip0 flip90 flip180 flip270)'
{-e,--select-tcpip}'[Use TCP/IP device]'
{-f,--fullscreen}'[Start in fullscreen]'
'--force-adb-forward[Do not attempt to use \"adb reverse\" to connect to the device]'
'-G[Use UHID/AOA gamepad (same as --gamepad=uhid or --gamepad=aoa, depending on OTG mode)]'
'-G[Use UHID/AOA gamepad \(same as --gamepad=uhid or --gamepad=aoa, depending on OTG mode\)]'
'--gamepad=[Set the gamepad input mode]:mode:(disabled uhid aoa)'
{-h,--help}'[Print the help]'
'-K[Use UHID/AOA keyboard (same as --keyboard=uhid or --keyboard=aoa, depending on OTG mode)]'
'-K[Use UHID/AOA keyboard \(same as --keyboard=uhid or --keyboard=aoa, depending on OTG mode\)]'
'--keyboard=[Set the keyboard input mode]:mode:(disabled sdk uhid aoa)'
'--kill-adb-on-close[Kill adb when scrcpy terminates]'
'--legacy-paste[Inject computer clipboard text as a sequence of key events on Ctrl+v]'
@@ -47,7 +49,7 @@ arguments=(
'--list-displays[List displays available on the device]'
'--list-encoders[List video and audio encoders available on the device]'
{-m,--max-size=}'[Limit both the width and height of the video to value]'
'-M[Use UHID/AOA mouse (same as --mouse=uhid or --mouse=aoa, depending on OTG mode)]'
'-M[Use UHID/AOA mouse \(same as --mouse=uhid or --mouse=aoa, depending on OTG mode\)]'
'--max-fps=[Limit the frame rate of screen capture]'
'--mouse=[Set the mouse input mode]:mode:(disabled sdk uhid aoa)'
'--mouse-bind=[Configure bindings of secondary clicks]'
@@ -63,6 +65,7 @@ arguments=(
'--no-mipmaps[Disable the generation of mipmaps]'
'--no-mouse-hover[Do not forward mouse hover events]'
'--no-power-on[Do not power on the device on start]'
'--no-vd-destroy-content[Disable virtual display "destroy content on removal" flag]'
'--no-vd-system-decorations[Disable virtual display system decorations flag]'
'--no-video[Disable video forwarding]'
'--no-video-playback[Disable video playback]'

View File

@@ -1,10 +1,9 @@
#!/usr/bin/env bash
# This file is intended to be sourced by other scripts, not executed
process_args() {
if [[ $# != 3 ]]
then
# <host>: win32 or win64
# <host>: linux, macos, win32 or win64
# <build_type>: native or cross
# <link_type>: static or shared
echo "Syntax: $0 <host> <build_type> <link_type>" >&2
@@ -12,8 +11,8 @@ process_args() {
fi
HOST="$1"
BUILD_TYPE="$2" # native or cross
LINK_TYPE="$3" # static or shared
BUILD_TYPE="$2"
LINK_TYPE="$3"
DIRNAME="$HOST-$BUILD_TYPE-$LINK_TYPE"
if [[ "$BUILD_TYPE" != native && "$BUILD_TYPE" != cross ]]

View File

@@ -1,13 +1,13 @@
#!/usr/bin/env bash
set -ex
DEPS_DIR=$(dirname ${BASH_SOURCE[0]})
cd "$DEPS_DIR"
. common
. $(dirname ${BASH_SOURCE[0]})/_init "$@"
VERSION=35.0.2
FILENAME=platform-tools_r$VERSION-linux.zip
PROJECT_DIR=platform-tools-$VERSION-linux
SHA256SUM=acfdcccb123a8718c46c46c059b2f621140194e5ec1ac9d81715be3d6ab6cd0a
VERSION=36.0.0
URL="https://dl.google.com/android/repository/platform-tools_r$VERSION-linux.zip"
SHA256SUM=0ead642c943ffe79701fccca8f5f1c69c4ce4f43df2eefee553f6ccb27cbfbe8
PROJECT_DIR="platform-tools-$VERSION-linux"
FILENAME="$PROJECT_DIR.zip"
cd "$SOURCES_DIR"
@@ -15,7 +15,7 @@ if [[ -d "$PROJECT_DIR" ]]
then
echo "$PWD/$PROJECT_DIR" found
else
get_file "https://dl.google.com/android/repository/$FILENAME" "$FILENAME" "$SHA256SUM"
get_file "$URL" "$FILENAME" "$SHA256SUM"
mkdir -p "$PROJECT_DIR"
cd "$PROJECT_DIR"
ZIP_PREFIX=platform-tools

View File

@@ -1,13 +1,13 @@
#!/usr/bin/env bash
set -ex
DEPS_DIR=$(dirname ${BASH_SOURCE[0]})
cd "$DEPS_DIR"
. common
. $(dirname ${BASH_SOURCE[0]})/_init "$@"
VERSION=35.0.2
FILENAME=platform-tools_r$VERSION-darwin.zip
PROJECT_DIR=platform-tools-$VERSION-darwin
SHA256SUM=1820078db90bf21628d257ff052528af1c61bb48f754b3555648f5652fa35d78
VERSION=36.0.0
URL="https://dl.google.com/android/repository/platform-tools_r$VERSION-darwin.zip"
SHA256SUM=d3e9fa1df3345cf728586908426615a60863d2632f73f1ce14f0f1349ef000fd
PROJECT_DIR="platform-tools-$VERSION-darwin"
FILENAME="$PROJECT_DIR.zip"
cd "$SOURCES_DIR"
@@ -15,7 +15,7 @@ if [[ -d "$PROJECT_DIR" ]]
then
echo "$PWD/$PROJECT_DIR" found
else
get_file "https://dl.google.com/android/repository/$FILENAME" "$FILENAME" "$SHA256SUM"
get_file "$URL" "$FILENAME" "$SHA256SUM"
mkdir -p "$PROJECT_DIR"
cd "$PROJECT_DIR"
ZIP_PREFIX=platform-tools

View File

@@ -1,13 +1,13 @@
#!/usr/bin/env bash
set -ex
DEPS_DIR=$(dirname ${BASH_SOURCE[0]})
cd "$DEPS_DIR"
. common
. $(dirname ${BASH_SOURCE[0]})/_init "$@"
VERSION=35.0.2
FILENAME=platform-tools_r$VERSION-win.zip
PROJECT_DIR=platform-tools-$VERSION-windows
SHA256SUM=2975a3eac0b19182748d64195375ad056986561d994fffbdc64332a516300bb9
VERSION=36.0.0
URL="https://dl.google.com/android/repository/platform-tools_r$VERSION-win.zip"
SHA256SUM=12c2841f354e92a0eb2fd7bf6f0f9bf8538abce7bd6b060ac8349d6f6a61107c
PROJECT_DIR="platform-tools-$VERSION-windows"
FILENAME="$PROJECT_DIR.zip"
cd "$SOURCES_DIR"
@@ -15,7 +15,7 @@ if [[ -d "$PROJECT_DIR" ]]
then
echo "$PWD/$PROJECT_DIR" found
else
get_file "https://dl.google.com/android/repository/$FILENAME" "$FILENAME" "$SHA256SUM"
get_file "$URL" "$FILENAME" "$SHA256SUM"
mkdir -p "$PROJECT_DIR"
cd "$PROJECT_DIR"
ZIP_PREFIX=platform-tools

68
app/deps/dav1d.sh Executable file
View File

@@ -0,0 +1,68 @@
#!/usr/bin/env bash
set -ex
. $(dirname ${BASH_SOURCE[0]})/_init
process_args "$@"
VERSION=1.5.0
URL="https://code.videolan.org/videolan/dav1d/-/archive/$VERSION/dav1d-$VERSION.tar.gz"
SHA256SUM=78b15d9954b513ea92d27f39362535ded2243e1b0924fde39f37a31ebed5f76b
PROJECT_DIR="dav1d-$VERSION"
FILENAME="$PROJECT_DIR.tar.gz"
cd "$SOURCES_DIR"
if [[ -d "$PROJECT_DIR" ]]
then
echo "$PWD/$PROJECT_DIR" found
else
get_file "$URL" "$FILENAME" "$SHA256SUM"
tar xf "$FILENAME" # First level directory is "$PROJECT_DIR"
fi
mkdir -p "$BUILD_DIR/$PROJECT_DIR"
cd "$BUILD_DIR/$PROJECT_DIR"
if [[ -d "$DIRNAME" ]]
then
echo "'$PWD/$DIRNAME' already exists, not reconfigured"
cd "$DIRNAME"
else
mkdir "$DIRNAME"
cd "$DIRNAME"
conf=(
--prefix="$INSTALL_DIR/$DIRNAME"
--libdir=lib
-Denable_tests=false
-Denable_tools=false
# Always build dav1d statically
--default-library=static
)
if [[ "$BUILD_TYPE" == cross ]]
then
case "$HOST" in
win32)
conf+=(
--cross-file="$SOURCES_DIR/$PROJECT_DIR/package/crossfiles/i686-w64-mingw32.meson"
)
;;
win64)
conf+=(
--cross-file="$SOURCES_DIR/$PROJECT_DIR/package/crossfiles/x86_64-w64-mingw32.meson"
)
;;
*)
echo "Unsupported host: $HOST" >&2
exit 1
esac
fi
meson setup . "$SOURCES_DIR/$PROJECT_DIR" "${conf[@]}"
fi
ninja
ninja install

View File

@@ -1,14 +1,14 @@
#!/usr/bin/env bash
set -ex
DEPS_DIR=$(dirname ${BASH_SOURCE[0]})
cd "$DEPS_DIR"
. common
. $(dirname ${BASH_SOURCE[0]})/_init
process_args "$@"
VERSION=7.1
FILENAME=ffmpeg-$VERSION.tar.xz
PROJECT_DIR=ffmpeg-$VERSION
SHA256SUM=40973D44970DBC83EF302B0609F2E74982BE2D85916DD2EE7472D30678A7ABE6
VERSION=7.1.1
URL="https://ffmpeg.org/releases/ffmpeg-$VERSION.tar.xz"
SHA256SUM=733984395e0dbbe5c046abda2dc49a5544e7e0e1e2366bba849222ae9e3a03b1
PROJECT_DIR="ffmpeg-$VERSION"
FILENAME="$PROJECT_DIR.tar.xz"
cd "$SOURCES_DIR"
@@ -16,7 +16,7 @@ if [[ -d "$PROJECT_DIR" ]]
then
echo "$PWD/$PROJECT_DIR" found
else
get_file "https://ffmpeg.org/releases/$FILENAME" "$FILENAME" "$SHA256SUM"
get_file "$URL" "$FILENAME" "$SHA256SUM"
tar xf "$FILENAME" # First level directory is "$PROJECT_DIR"
fi
@@ -40,16 +40,14 @@ else
export LDFLAGS='-static-libgcc -static'
elif [[ "$HOST" == "macos" ]]
then
export LDFLAGS="$LDFLAGS -L/opt/homebrew/opt/zlib/lib"
export CPPFLAGS="$CPPFLAGS -I/opt/homebrew/opt/zlib/include"
export LDFLAGS="$LDFLAGS-L/opt/homebrew/opt/libiconv/lib"
export CPPFLAGS="$CPPFLAGS -I/opt/homebrew/opt/libiconv/include"
export PKG_CONFIG_PATH="/opt/homebrew/opt/zlib/lib/pkgconfig"
fi
export PKG_CONFIG_PATH="$INSTALL_DIR/$DIRNAME/lib/pkgconfig:$PKG_CONFIG_PATH"
conf=(
--prefix="$INSTALL_DIR/$DIRNAME"
--pkg-config-flags="--static"
--extra-cflags="-O2 -fPIC"
--disable-programs
--disable-doc
@@ -62,9 +60,11 @@ else
--disable-vaapi
--disable-vdpau
--enable-swresample
--enable-libdav1d
--enable-decoder=h264
--enable-decoder=hevc
--enable-decoder=av1
--enable-decoder=libdav1d
--enable-decoder=pcm_s16le
--enable-decoder=opus
--enable-decoder=aac

View File

@@ -1,14 +1,14 @@
#!/usr/bin/env bash
set -ex
DEPS_DIR=$(dirname ${BASH_SOURCE[0]})
cd "$DEPS_DIR"
. common
. $(dirname ${BASH_SOURCE[0]})/_init
process_args "$@"
VERSION=1.0.27
FILENAME=libusb-$VERSION.tar.gz
PROJECT_DIR=libusb-$VERSION
SHA256SUM=e8f18a7a36ecbb11fb820bd71540350d8f61bcd9db0d2e8c18a6fb80b214a3de
VERSION=1.0.29
URL="https://github.com/libusb/libusb/archive/refs/tags/v$VERSION.tar.gz"
SHA256SUM=7c2dd39c0b2589236e48c93247c986ae272e27570942b4163cb00a060fcf1b74
PROJECT_DIR="libusb-$VERSION"
FILENAME="$PROJECT_DIR.tar.gz"
cd "$SOURCES_DIR"
@@ -16,7 +16,7 @@ if [[ -d "$PROJECT_DIR" ]]
then
echo "$PWD/$PROJECT_DIR" found
else
get_file "https://github.com/libusb/libusb/archive/refs/tags/v$VERSION.tar.gz" "$FILENAME" "$SHA256SUM"
get_file "$URL" "$FILENAME" "$SHA256SUM"
tar xf "$FILENAME" # First level directory is "$PROJECT_DIR"
fi

View File

@@ -1,14 +1,14 @@
#!/usr/bin/env bash
set -ex
DEPS_DIR=$(dirname ${BASH_SOURCE[0]})
cd "$DEPS_DIR"
. common
. $(dirname ${BASH_SOURCE[0]})/_init
process_args "$@"
VERSION=2.30.9
FILENAME=SDL-$VERSION.tar.gz
PROJECT_DIR=SDL-release-$VERSION
SHA256SUM=682a055004081e37d81a7d4ce546c3ee3ef2e0e6a675ed2651e430ccd14eb407
VERSION=3.2.18
URL="https://github.com/libsdl-org/SDL/archive/refs/tags/release-$VERSION.tar.gz"
SHA256SUM=51539fa13e546bc50c632beed3f34257de2baa38a4c642048de56377903b4265
PROJECT_DIR="sdl-$VERSION"
FILENAME="$PROJECT_DIR.tar.gz"
cd "$SOURCES_DIR"
@@ -16,8 +16,9 @@ if [[ -d "$PROJECT_DIR" ]]
then
echo "$PWD/$PROJECT_DIR" found
else
get_file "https://github.com/libsdl-org/SDL/archive/refs/tags/release-$VERSION.tar.gz" "$FILENAME" "$SHA256SUM"
tar xf "$FILENAME" # First level directory is "$PROJECT_DIR"
get_file "$URL" "$FILENAME" "$SHA256SUM"
tar xf "$FILENAME" # First level directory is "SDL-release-$VERSION"
mv "SDL-release-$VERSION" "$PROJECT_DIR"
fi
mkdir -p "$BUILD_DIR/$PROJECT_DIR"
@@ -28,52 +29,55 @@ export CXXFLAGS="$CFLAGS"
if [[ -d "$DIRNAME" ]]
then
echo "'$PWD/$HDIRNAME' already exists, not reconfigured"
echo "'$PWD/$DIRNAME' already exists, not reconfigured"
cd "$DIRNAME"
else
mkdir "$DIRNAME"
cd "$DIRNAME"
conf=(
--prefix="$INSTALL_DIR/$DIRNAME"
-DCMAKE_INSTALL_PREFIX="$INSTALL_DIR/$DIRNAME"
)
if [[ "$HOST" == linux ]]
then
conf+=(
--enable-video-wayland
--enable-video-x11
-DSDL_WAYLAND=ON
-DSDL_X11=ON
)
fi
if [[ "$LINK_TYPE" == static ]]
then
conf+=(
--enable-static
--disable-shared
-DBUILD_SHARED_LIBS=OFF
)
else
conf+=(
--disable-static
--enable-shared
-DBUILD_SHARED_LIBS=ON
)
fi
if [[ "$BUILD_TYPE" == cross ]]
then
if [[ "$HOST" = win32 ]]
then
TOOLCHAIN_FILENAME="cmake-toolchain-mingw64-i686.cmake"
elif [[ "$HOST" = win64 ]]
then
TOOLCHAIN_FILENAME="cmake-toolchain-mingw64-x86_64.cmake"
else
echo "Unsupported cross-build to host: $HOST" >&2
exit 1
fi
conf+=(
--host="$HOST_TRIPLET"
-DCMAKE_TOOLCHAIN_FILE="$SOURCES_DIR/$PROJECT_DIR/build-scripts/$TOOLCHAIN_FILENAME"
)
fi
"$SOURCES_DIR/$PROJECT_DIR"/configure "${conf[@]}"
cmake "$SOURCES_DIR/$PROJECT_DIR" "${conf[@]}"
fi
make -j
# There is no "make install-strip"
make install
# Strip manually
if [[ "$LINK_TYPE" == shared && "$HOST" == win* ]]
then
${HOST_TRIPLET}-strip "$INSTALL_DIR/$DIRNAME/bin/SDL2.dll"
fi
cmake --build .
cmake --install .

View File

@@ -57,6 +57,7 @@ src = [
'src/util/process.c',
'src/util/process_intr.c',
'src/util/rand.c',
'src/util/sdl.c',
'src/util/strbuf.c',
'src/util/str.c',
'src/util/term.c',
@@ -117,7 +118,7 @@ dependencies = [
dependency('libavcodec', version: '>= 57.37', static: static),
dependency('libavutil', static: static),
dependency('libswresample', static: static),
dependency('sdl2', version: '>= 2.0.5', static: static),
dependency('sdl3', version: '>= 3.2.0', static: static),
]
if v4l2_support
@@ -192,19 +193,19 @@ datadir = get_option('datadir') # by default 'share'
install_man('scrcpy.1')
install_data('data/icon.png',
rename: 'scrcpy.png',
install_dir: join_paths(datadir, 'icons/hicolor/256x256/apps'))
install_dir: datadir / 'icons/hicolor/256x256/apps')
install_data('data/zsh-completion/_scrcpy',
install_dir: join_paths(datadir, 'zsh/site-functions'))
install_dir: datadir / 'zsh/site-functions')
install_data('data/bash-completion/scrcpy',
install_dir: join_paths(datadir, 'bash-completion/completions'))
install_dir: datadir / 'bash-completion/completions')
# Desktop entry file for application launchers
if host_machine.system() == 'linux'
# Install a launcher (ex: /usr/local/share/applications/scrcpy.desktop)
install_data('data/scrcpy.desktop',
install_dir: join_paths(datadir, 'applications'))
install_dir: datadir / 'applications')
install_data('data/scrcpy-console.desktop',
install_dir: join_paths(datadir, 'applications'))
install_dir: datadir / 'applications')
endif
@@ -279,3 +280,9 @@ if get_option('buildtype') == 'debug'
test(t[0], exe)
endforeach
endif
if meson.version().version_compare('>= 0.58.0')
devenv = environment()
devenv.set('SCRCPY_ICON_PATH', meson.current_source_dir() / 'data/icon.png')
meson.add_devenv(devenv)
endif

View File

@@ -13,7 +13,7 @@ BEGIN
VALUE "LegalCopyright", "Romain Vimont, Genymobile"
VALUE "OriginalFilename", "scrcpy.exe"
VALUE "ProductName", "scrcpy"
VALUE "ProductVersion", "3.0"
VALUE "ProductVersion", "3.3.3"
END
END
BLOCK "VarFileInfo"

View File

@@ -67,13 +67,19 @@ The available encoders can be listed by \fB\-\-list\-encoders\fR.
.TP
.BI "\-\-audio\-source " source
Select the audio source (output, mic or playback).
Select the audio source. Possible values are:
The "output" source forwards the whole audio output, and disables playback on the device.
The "playback" source captures the audio playback (Android apps can opt-out, so the whole output is not necessarily captured).
The "mic" source captures the microphone.
- "output": forwards the whole audio output, and disables playback on the device.
- "playback": captures the audio playback (Android apps can opt-out, so the whole output is not necessarily captured).
- "mic": captures the microphone.
- "mic-unprocessed": captures the microphone unprocessed (raw) sound.
- "mic-camcorder": captures the microphone tuned for video recording, with the same orientation as the camera if available.
- "mic-voice-recognition": captures the microphone tuned for voice recognition.
- "mic-voice-communication": captures the microphone tuned for voice communications (it will for instance take advantage of echo cancellation or automatic gain control if available).
- "voice-call": captures voice call.
- "voice-call-uplink": captures voice call uplink only.
- "voice-call-downlink": captures voice call downlink only.
- "voice-performance": captures audio meant to be processed for live performance (karaoke), includes both the microphone and the device playback.
Default is output.
@@ -125,6 +131,10 @@ The available camera ids can be listed by \fB\-\-list\-cameras\fR.
.BI "\-\-camera\-size " width\fRx\fIheight
Specify an explicit camera capture size.
.TP
.BI \-\-camera\-torch
Turn on the camera torch when the camera starts.
.TP
.BI "\-\-capture\-orientation " value
Possible values are 0, 90, 180, 270, flip0, flip90, flip180 and flip270, possibly prefixed by '@'.
@@ -161,6 +171,19 @@ The available display ids can be listed by \fB\-\-list\-displays\fR.
Default is 0.
.TP
.BI "\-\-display\-ime\-policy " value
Set the policy for selecting where the IME should be displayed.
Possible values are "local", "fallback" and "hide":
- "local" means that the IME should appear on the local display.
- "fallback" means that the IME should appear on a fallback display (the default display).
- "hide" means that the IME should be hidden.
By default, the IME policy is left unchanged.
.TP
.BI "\-\-display\-orientation " value
Set the initial display orientation.
@@ -369,6 +392,12 @@ Do not forward mouse hover (mouse motion without any clicks) events.
.B \-\-no\-power\-on
Do not power on the device on start.
.TP
.B \-\-no\-vd\-destroy\-content
Disable virtual display "destroy content on removal" flag.
With this option, when the virtual display is closed, the running apps are moved to the main display rather than being destroyed.
.TP
.B \-\-no\-vd\-system\-decorations
Disable virtual display system decorations flag.
@@ -383,7 +412,7 @@ Disable video playback on the computer.
.TP
.B \-\-no\-window
Disable scrcpy window. Implies --no-video-playback and --no-control.
Disable scrcpy window. Implies --no-video-playback.
.TP
.BI "\-\-orientation " value
@@ -485,6 +514,10 @@ The device serial number. Mandatory only if several devices are connected to adb
.B \-S, \-\-turn\-screen\-off
Turn the device screen off immediately.
.TP
.B "\-\-screen\-off\-timeout " seconds
Set the screen off timeout while scrcpy is running (restore the initial value on exit).
.TP
.BI "\-\-shortcut\-mod " key\fR[+...]][,...]
Specify the modifiers to use for scrcpy shortcuts. Possible keys are "lctrl", "rctrl", "lalt", "ralt", "lsuper" and "rsuper".
@@ -518,13 +551,15 @@ Enable "show touches" on start, restore the initial value on exit.
It only shows physical touches (not clicks from scrcpy).
.TP
.BI "\-\-tcpip\fR[=\fIip\fR[:\fIport\fR]]
Configure and reconnect the device over TCP/IP.
.BI "\-\-tcpip\fR[=[+]\fIip\fR[:\fIport\fR]]
Configure and connect the device over TCP/IP.
If a destination address is provided, then scrcpy connects to this address before starting. The device must listen on the given TCP port (default is 5555).
If no destination address is provided, then scrcpy attempts to find the IP address and adb port of the current device (typically connected over USB), enables TCP/IP mode if necessary, then connects to this address before starting.
Prefix the address with a '+' to force a reconnection.
.TP
.BI "\-\-time\-limit " seconds
Set the maximum mirroring time, in seconds.
@@ -784,6 +819,14 @@ Install APK from computer
.B Drag & drop non-APK file
Push file to device (see \fB\-\-push\-target\fR)
.TP
.B MOD+l
Turn on the camera torch (camera mode only)
.TP
.B MOD+Shift+l
Turn off the camera torch (camera mode only)
.SH Environment variables
@@ -821,7 +864,7 @@ Report bugs to <https://github.com/Genymobile/scrcpy/issues>.
.SH COPYRIGHT
Copyright \(co 2018 Genymobile <https://www.genymobile.com>
Copyright \(co 2018\-2024 Romain Vimont <rom@rom1v.com>
Copyright \(co 2018\-2025 Romain Vimont <rom@rom1v.com>
Licensed under the Apache License, Version 2.0.

View File

@@ -4,9 +4,10 @@
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include "adb_device.h"
#include "adb_parser.h"
#include "adb/adb_device.h"
#include "adb/adb_parser.h"
#include "util/env.h"
#include "util/file.h"
#include "util/log.h"
@@ -102,14 +103,14 @@ argv_to_string(const char *const *argv, char *buf, size_t bufsize) {
static void
show_adb_installation_msg(void) {
#ifndef __WINDOWS__
#ifndef _WIN32
static const struct {
const char *binary;
const char *command;
} pkg_managers[] = {
{"apt", "apt install adb"},
{"apt-get", "apt-get install adb"},
{"brew", "brew cask install android-platform-tools"},
{"brew", "brew install --cask android-platform-tools"},
{"dnf", "dnf install android-tools"},
{"emerge", "emerge dev-util/android-tools"},
{"pacman", "pacman -S android-tools"},
@@ -330,7 +331,7 @@ sc_adb_reverse_remove(struct sc_intr *intr, const char *serial,
bool
sc_adb_push(struct sc_intr *intr, const char *serial, const char *local,
const char *remote, unsigned flags) {
#ifdef __WINDOWS__
#ifdef _WIN32
// Windows will parse the string, so the paths must be quoted
// (see sys/win/command.c)
local = sc_str_quote(local);
@@ -350,7 +351,7 @@ sc_adb_push(struct sc_intr *intr, const char *serial, const char *local,
sc_pid pid = sc_adb_execute(argv, flags);
#ifdef __WINDOWS__
#ifdef _WIN32
free((void *) remote);
free((void *) local);
#endif
@@ -361,7 +362,7 @@ sc_adb_push(struct sc_intr *intr, const char *serial, const char *local,
bool
sc_adb_install(struct sc_intr *intr, const char *serial, const char *local,
unsigned flags) {
#ifdef __WINDOWS__
#ifdef _WIN32
// Windows will parse the string, so the local name must be quoted
// (see sys/win/command.c)
local = sc_str_quote(local);
@@ -376,7 +377,7 @@ sc_adb_install(struct sc_intr *intr, const char *serial, const char *local,
sc_pid pid = sc_adb_execute(argv, flags);
#ifdef __WINDOWS__
#ifdef _WIN32
free((void *) local);
#endif
@@ -412,7 +413,7 @@ sc_adb_connect(struct sc_intr *intr, const char *ip_port, unsigned flags) {
// "adb connect" always returns successfully (with exit code 0), even in
// case of failure. As a workaround, check if its output starts with
// "connected".
// "connected" or "already connected".
char buf[128];
ssize_t r = sc_pipe_read_all_intr(intr, pid, pout, buf, sizeof(buf) - 1);
sc_pipe_close(pout);
@@ -429,7 +430,8 @@ sc_adb_connect(struct sc_intr *intr, const char *ip_port, unsigned flags) {
assert((size_t) r < sizeof(buf));
buf[r] = '\0';
ok = !strncmp("connected", buf, sizeof("connected") - 1);
ok = !strncmp("connected", buf, sizeof("connected") - 1)
|| !strncmp("already connected", buf, sizeof("already connected") - 1);
if (!ok && !(flags & SC_ADB_NO_STDERR)) {
// "adb connect" also prints errors to stdout. Since we capture it,
// re-print the error to stderr.

View File

@@ -6,7 +6,7 @@
#include <stdbool.h>
#include <inttypes.h>
#include "adb_device.h"
#include "adb/adb_device.h"
#include "util/intr.h"
#define SC_ADB_NO_STDOUT (1 << 0)

View File

@@ -4,7 +4,6 @@
#include "common.h"
#include <stdbool.h>
#include <stddef.h>
#include "util/vector.h"

View File

@@ -3,6 +3,7 @@
#include <assert.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include "util/log.h"
#include "util/str.h"

View File

@@ -3,9 +3,9 @@
#include "common.h"
#include <stddef.h>
#include <stdbool.h>
#include "adb_device.h"
#include "adb/adb_device.h"
/**
* Parse the available devices from the output of `adb devices`

View File

@@ -1,11 +1,11 @@
#include "adb_tunnel.h"
#include <assert.h>
#include <inttypes.h>
#include "adb.h"
#include "adb/adb.h"
#include "util/log.h"
#include "util/net_intr.h"
#include "util/process_intr.h"
static bool
listen_on_port(struct sc_intr *intr, sc_socket socket, uint16_t port) {

View File

@@ -1,23 +1,40 @@
#include "audio_player.h"
#include "util/log.h"
#include "SDL3/SDL_hints.h"
/** Downcast frame_sink to sc_audio_player */
#define DOWNCAST(SINK) container_of(SINK, struct sc_audio_player, frame_sink)
#define SC_SDL_SAMPLE_FMT AUDIO_F32
#define SC_SDL_SAMPLE_FMT SDL_AUDIO_F32LE
static void SDLCALL
sc_audio_player_sdl_callback(void *userdata, uint8_t *stream, int len_int) {
sc_audio_player_stream_callback(void *userdata, SDL_AudioStream *stream,
int additional_amount, int total_amount) {
(void) total_amount;
struct sc_audio_player *ap = userdata;
assert(len_int > 0);
size_t len = len_int;
size_t len = additional_amount;
assert(len % ap->audioreg.sample_size == 0);
uint32_t out_samples = len / ap->audioreg.sample_size;
sc_audio_regulator_pull(&ap->audioreg, stream, out_samples);
// The requested amount may exceed the internal aout_buffer size.
// In this (unlikely) case, send the data to the stream in multiple chunks.
while (len) {
size_t chunk_size = MIN(ap->aout_buffer_size, len);
uint32_t out_samples = chunk_size / ap->audioreg.sample_size;
sc_audio_regulator_pull(&ap->audioreg, ap->aout_buffer,
out_samples);
assert(chunk_size <= len);
len -= chunk_size;
bool ok =
SDL_PutAudioStreamData(stream, ap->aout_buffer, chunk_size);
if (!ok) {
LOGW("Audio stream error: %s", SDL_GetError());
return;
}
}
}
static bool
@@ -30,7 +47,10 @@ sc_audio_player_frame_sink_push(struct sc_frame_sink *sink,
static bool
sc_audio_player_frame_sink_open(struct sc_frame_sink *sink,
const AVCodecContext *ctx) {
const AVCodecContext *ctx,
const struct sc_stream_session *session) {
(void) session;
struct sc_audio_player *ap = DOWNCAST(sink);
#ifdef SCRCPY_LAVU_HAS_CHLAYOUT
@@ -61,23 +81,45 @@ sc_audio_player_frame_sink_open(struct sc_frame_sink *sink,
/ SC_TICK_FREQ;
assert(aout_samples <= 0xFFFF);
SDL_AudioSpec desired = {
.freq = ctx->sample_rate,
.format = SC_SDL_SAMPLE_FMT,
.channels = nb_channels,
.samples = aout_samples,
.callback = sc_audio_player_sdl_callback,
.userdata = ap,
};
SDL_AudioSpec obtained;
ap->device = SDL_OpenAudioDevice(NULL, 0, &desired, &obtained, 0);
if (!ap->device) {
LOGE("Could not open audio device: %s", SDL_GetError());
char str[5 + 1]; // max 65535
int r = snprintf(str, sizeof(str), "%" PRIu16, (uint16_t) aout_samples);
assert(r >= 0 && (size_t) r < sizeof(str));
(void) r;
if (!SDL_SetHint(SDL_HINT_AUDIO_DEVICE_SAMPLE_FRAMES, str)) {
LOGE("Could not set audio output buffer");
sc_audio_regulator_destroy(&ap->audioreg);
return false;
}
// Make the buffer at least 1024 samples long (the hint is not always
// honored)
uint64_t aout_buffer_samples = MAX(1024, aout_samples);
ap->aout_buffer_size = aout_buffer_samples * sample_size;
ap->aout_buffer = malloc(ap->aout_buffer_size);
if (!ap->aout_buffer) {
sc_audio_regulator_destroy(&ap->audioreg);
return false;
}
SDL_AudioSpec spec = {
.freq = ctx->sample_rate,
.format = SC_SDL_SAMPLE_FMT,
.channels = nb_channels,
};
ap->stream = SDL_OpenAudioDeviceStream(SDL_AUDIO_DEVICE_DEFAULT_PLAYBACK,
&spec,
sc_audio_player_stream_callback, ap);
if (!ap->stream) {
LOGE("Could not open audio device: %s", SDL_GetError());
free(ap->aout_buffer);
sc_audio_regulator_destroy(&ap->audioreg);
return false;
}
ap->device = SDL_GetAudioStreamDevice(ap->stream);
assert(ap->device);
// The thread calling open() is the thread calling push(), which fills the
// audio buffer consumed by the SDL audio thread.
ok = sc_thread_set_priority(SC_THREAD_PRIORITY_TIME_CRITICAL);
@@ -86,7 +128,14 @@ sc_audio_player_frame_sink_open(struct sc_frame_sink *sink,
(void) ok; // We don't care if it worked, at least we tried
}
SDL_PauseAudioDevice(ap->device, 0);
ok = SDL_ResumeAudioDevice(ap->device);
if (!ok) {
LOGE("Could not resume audio device: %s", SDL_GetError());
SDL_DestroyAudioStream(ap->stream);
free(ap->aout_buffer);
sc_audio_regulator_destroy(&ap->audioreg);
return false;
}
return true;
}
@@ -95,11 +144,16 @@ static void
sc_audio_player_frame_sink_close(struct sc_frame_sink *sink) {
struct sc_audio_player *ap = DOWNCAST(sink);
assert(ap->stream);
assert(ap->device);
SDL_PauseAudioDevice(ap->device, 1);
SDL_CloseAudioDevice(ap->device);
SDL_PauseAudioDevice(ap->device);
// ap->device is owned by ap->stream
SDL_DestroyAudioStream(ap->stream);
sc_audio_regulator_destroy(&ap->audioreg);
free(ap->aout_buffer);
}
void

View File

@@ -3,9 +3,7 @@
#include "common.h"
#include <stdatomic.h>
#include <stdbool.h>
#include <SDL2/SDL.h>
#include <SDL3/SDL_audio.h>
#include "audio_regulator.h"
#include "trait/frame_sink.h"
@@ -24,7 +22,11 @@ struct sc_audio_player {
// SDL audio output buffer size
sc_tick output_buffer_duration;
SDL_AudioDeviceID device;
uint8_t *aout_buffer;
size_t aout_buffer_size;
SDL_AudioStream *stream;
SDL_AudioDeviceID device; // owned by the audio stream
struct sc_audio_regulator audioreg;
};

View File

@@ -1,5 +1,9 @@
#include "audio_regulator.h"
#include <assert.h>
#include <inttypes.h>
#include <stdlib.h>
#include <string.h>
#include <libavcodec/avcodec.h>
#include <libavutil/opt.h>
@@ -72,8 +76,10 @@ sc_audio_regulator_pull(struct sc_audio_regulator *ar, uint8_t *out,
// Wait until the buffer is filled up to at least target_buffering
// before playing
if (buffered_samples < ar->target_buffering) {
LOGV("[Audio] Inserting initial buffering silence: %" PRIu32
#ifdef SC_AUDIO_REGULATOR_DEBUG
LOGD("[Audio] Inserting initial buffering silence: %" PRIu32
" samples", out_samples);
#endif
// Delay playback starting to reach the target buffering. Fill the
// whole buffer with silence (len is small compared to the
// arbitrary margin value).
@@ -94,8 +100,10 @@ sc_audio_regulator_pull(struct sc_audio_regulator *ar, uint8_t *out,
// dropped to keep the latency minimal. However, this would cause very
// audible glitches, so let the clock compensation restore the target
// latency.
#ifdef SC_AUDIO_REGULATOR_DEBUG
LOGD("[Audio] Buffer underflow, inserting silence: %" PRIu32 " samples",
silence);
#endif
memset(out + TO_BYTES(read), 0, TO_BYTES(silence));
bool received = atomic_load_explicit(&ar->received,
@@ -133,6 +141,36 @@ bool
sc_audio_regulator_push(struct sc_audio_regulator *ar, const AVFrame *frame) {
SwrContext *swr_ctx = ar->swr_ctx;
uint32_t input_samples = frame->nb_samples;
assert(frame->pts >= 0);
int64_t pts = frame->pts;
if (ar->next_expected_pts && pts - ar->next_expected_pts > 100000) {
LOGV("[Audio] Discontinuity detected: %" PRIi64 "µs",
pts - ar->next_expected_pts);
// More than 100ms: consider it as a discontinuity
// (typically because silence packets were not captured)
uint32_t can_read = sc_audiobuf_can_read(&ar->buf);
if (input_samples + can_read < ar->target_buffering) {
// Adjust buffering to the target value directly
uint32_t silence = ar->target_buffering - can_read - input_samples;
sc_audiobuf_write_silence(&ar->buf, silence);
}
// Reset state
ar->avg_buffering.avg = ar->target_buffering;
int ret = swr_set_compensation(swr_ctx, 0, 0);
(void) ret;
assert(!ret); // disabling compensation should never fail
ar->compensation_active = false;
ar->samples_since_resync = 0;
atomic_store_explicit(&ar->underflow, 0, memory_order_relaxed);
}
int64_t packet_duration = input_samples * INT64_C(1000000)
/ ar->sample_rate;
ar->next_expected_pts = pts + packet_duration;
int64_t swr_delay = swr_get_delay(swr_ctx, ar->sample_rate);
// No need to av_rescale_rnd(), input and output sample rates are the same.
// Add more space (256) for clock compensation.
@@ -205,6 +243,7 @@ sc_audio_regulator_push(struct sc_audio_regulator *ar, const AVFrame *frame) {
if (played) {
underflow = atomic_exchange_explicit(&ar->underflow, 0,
memory_order_relaxed);
ar->underflow_report += underflow;
max_buffered_samples = ar->target_buffering * 11 / 10
+ 60 * ar->sample_rate / 1000 /* 60 ms */;
@@ -251,7 +290,7 @@ sc_audio_regulator_push(struct sc_audio_regulator *ar, const AVFrame *frame) {
}
// Number of samples added (or removed, if negative) for compensation
int32_t instant_compensation = (int32_t) written - frame->nb_samples;
int32_t instant_compensation = (int32_t) written - input_samples;
// Inserting silence instantly increases buffering
int32_t inserted_silence = (int32_t) underflow;
// Dropping input samples instantly decreases buffering
@@ -307,7 +346,9 @@ sc_audio_regulator_push(struct sc_audio_regulator *ar, const AVFrame *frame) {
int abs_max_diff = distance / 50;
diff = CLAMP(diff, -abs_max_diff, abs_max_diff);
LOGV("[Audio] Buffering: target=%" PRIu32 " avg=%f cur=%" PRIu32
" compensation=%d", ar->target_buffering, avg, can_read, diff);
" compensation=%d (underflow=%" PRIu32 ")",
ar->target_buffering, avg, can_read, diff, ar->underflow_report);
ar->underflow_report = 0;
int ret = swr_set_compensation(swr_ctx, diff, distance);
if (ret < 0) {
@@ -390,7 +431,9 @@ sc_audio_regulator_init(struct sc_audio_regulator *ar, size_t sample_size,
atomic_init(&ar->played, false);
atomic_init(&ar->received, false);
atomic_init(&ar->underflow, 0);
ar->underflow_report = 0;
ar->compensation_active = false;
ar->next_expected_pts = 0;
return true;

View File

@@ -5,6 +5,8 @@
#include <stdatomic.h>
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#include <libavcodec/avcodec.h>
#include <libswresample/swresample.h>
#include "util/audiobuf.h"
@@ -44,6 +46,9 @@ struct sc_audio_regulator {
// Number of silence samples inserted since the last received packet
atomic_uint_least32_t underflow;
// Number of silence samples inserted since the last log
uint32_t underflow_report;
// Non-zero compensation applied (only used by the receiver thread)
bool compensation_active;
@@ -52,6 +57,9 @@ struct sc_audio_regulator {
// Set to true the first time samples are pulled by the player
atomic_bool played;
// PTS of the next expected packet (useful to detect discontinuities)
int64_t next_expected_pts;
};
bool

View File

@@ -5,6 +5,7 @@
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "options.h"
@@ -13,6 +14,7 @@
#include "util/str.h"
#include "util/strbuf.h"
#include "util/term.h"
#include "util/tick.h"
#define STR_IMPL_(x) #x
#define STR(x) STR_IMPL_(x)
@@ -110,6 +112,9 @@ enum {
OPT_CAPTURE_ORIENTATION,
OPT_ANGLE,
OPT_NO_VD_SYSTEM_DECORATIONS,
OPT_NO_VD_DESTROY_CONTENT,
OPT_DISPLAY_IME_POLICY,
OPT_CAMERA_TORCH,
};
struct sc_option {
@@ -213,13 +218,31 @@ static const struct sc_option options[] = {
.longopt_id = OPT_AUDIO_SOURCE,
.longopt = "audio-source",
.argdesc = "source",
.text = "Select the audio source (output, mic or playback).\n"
"The \"output\" source forwards the whole audio output, and "
"disables playback on the device.\n"
"The \"playback\" source captures the audio playback (Android "
"apps can opt-out, so the whole output is not necessarily "
.text = "Select the audio source. Possible values are:\n"
" - \"output\": forwards the whole audio output, and disables "
"playback on the device.\n"
" - \"playback\": captures the audio playback (Android apps "
"can opt-out, so the whole output is not necessarily "
"captured).\n"
"The \"mic\" source captures the microphone.\n"
" - \"mic\": captures the microphone.\n"
" - \"mic-unprocessed\": captures the microphone unprocessed "
"(raw) sound.\n"
" - \"mic-camcorder\": captures the microphone tuned for video "
"recording, with the same orientation as the camera if "
"available.\n"
" - \"mic-voice-recognition\": captures the microphone tuned "
"for voice recognition.\n"
" - \"mic-voice-communication\": captures the microphone tuned "
"for voice communications (it will for instance take advantage "
"of echo cancellation or automatic gain control if "
"available).\n"
" - \"voice-call\": captures voice call.\n"
" - \"voice-call-uplink\": captures voice call uplink only.\n"
" - \"voice-call-downlink\": captures voice call downlink "
"only.\n"
" - \"voice-performance\": captures audio meant to be "
"processed for live performance (karaoke), includes both the "
"microphone and the device playback.\n"
"Default is output.",
},
{
@@ -291,6 +314,11 @@ static const struct sc_option options[] = {
.argdesc = "<width>x<height>",
.text = "Specify an explicit camera capture size.",
},
{
.longopt_id = OPT_CAMERA_TORCH,
.longopt = "camera-torch",
.text = "Turn on the camera torch when the camera starts.",
},
{
.longopt_id = OPT_CAPTURE_ORIENTATION,
.longopt = "capture-orientation",
@@ -363,6 +391,19 @@ static const struct sc_option options[] = {
" scrcpy --list-displays\n"
"Default is 0.",
},
{
.longopt_id = OPT_DISPLAY_IME_POLICY,
.longopt = "display-ime-policy",
.argdesc = "value",
.text = "Set the policy for selecting where the IME should be "
"displayed.\n"
"Possible values are \"local\", \"fallback\" and \"hide\".\n"
"\"local\" means that the IME should appear on the local "
"display.\n"
"\"fallback\" means that the IME should appear on a fallback "
"display (the default display).\n"
"\"hide\" means that the IME should be hidden.",
},
{
.longopt_id = OPT_DISPLAY_ORIENTATION,
.longopt = "display-orientation",
@@ -659,6 +700,15 @@ static const struct sc_option options[] = {
.longopt = "no-power-on",
.text = "Do not power on the device on start.",
},
{
.longopt_id = OPT_NO_VD_DESTROY_CONTENT,
.longopt = "no-vd-destroy-content",
.text = "Disable virtual display \"destroy content on removal\" "
"flag.\n"
"With this option, when the virtual display is closed, the "
"running apps are moved to the main display rather than being "
"destroyed.",
},
{
.longopt_id = OPT_NO_VD_SYSTEM_DECORATIONS,
.longopt = "no-vd-system-decorations",
@@ -677,8 +727,7 @@ static const struct sc_option options[] = {
{
.longopt_id = OPT_NO_WINDOW,
.longopt = "no-window",
.text = "Disable scrcpy window. Implies --no-video-playback and "
"--no-control.",
.text = "Disable scrcpy window. Implies --no-video-playback.",
},
{
.longopt_id = OPT_ORIENTATION,
@@ -860,16 +909,17 @@ static const struct sc_option options[] = {
{
.longopt_id = OPT_TCPIP,
.longopt = "tcpip",
.argdesc = "ip[:port]",
.argdesc = "[+]ip[:port]",
.optional_arg = true,
.text = "Configure and reconnect the device over TCP/IP.\n"
.text = "Configure and connect the device over TCP/IP.\n"
"If a destination address is provided, then scrcpy connects to "
"this address before starting. The device must listen on the "
"given TCP port (default is 5555).\n"
"If no destination address is provided, then scrcpy attempts "
"to find the IP address of the current device (typically "
"connected over USB), enables TCP/IP mode, then connects to "
"this address before starting.",
"this address before starting.\n"
"Prefix the address with a '+' to force a reconnection.",
},
{
.longopt_id = OPT_TIME_LIMIT,
@@ -1163,6 +1213,14 @@ static const struct sc_shortcut shortcuts[] = {
.shortcuts = { "Drag & drop non-APK file" },
.text = "Push file to device (see --push-target)",
},
{
.shortcuts = { "MOD+l" },
.text = "Turn on the camera torch (camera mode only)",
},
{
.shortcuts = { "MOD+Shift+l" },
.text = "Turn off the camera torch (camera mode only)",
},
};
static const struct sc_envvar envvars[] = {
@@ -1602,6 +1660,25 @@ parse_audio_output_buffer(const char *s, sc_tick *tick) {
return true;
}
static bool
parse_display_ime_policy(const char *s, enum sc_display_ime_policy *policy) {
if (!strcmp(s, "local")) {
*policy = SC_DISPLAY_IME_POLICY_LOCAL;
return true;
}
if (!strcmp(s, "fallback")) {
*policy = SC_DISPLAY_IME_POLICY_FALLBACK;
return true;
}
if (!strcmp(s, "hide")) {
*policy = SC_DISPLAY_IME_POLICY_HIDE;
return true;
}
LOGE("Unsupported display IME policy: %s (expected local, fallback or "
"hide)", s);
return false;
}
static bool
parse_orientation(const char *s, enum sc_orientation *orientation) {
if (!strcmp(s, "0")) {
@@ -1991,8 +2068,50 @@ parse_audio_source(const char *optarg, enum sc_audio_source *source) {
return true;
}
LOGE("Unsupported audio source: %s (expected output, mic or playback)",
optarg);
if (!strcmp(optarg, "mic-unprocessed")) {
*source = SC_AUDIO_SOURCE_MIC_UNPROCESSED;
return true;
}
if (!strcmp(optarg, "mic-camcorder")) {
*source = SC_AUDIO_SOURCE_MIC_CAMCORDER;
return true;
}
if (!strcmp(optarg, "mic-voice-recognition")) {
*source = SC_AUDIO_SOURCE_MIC_VOICE_RECOGNITION;
return true;
}
if (!strcmp(optarg, "mic-voice-communication")) {
*source = SC_AUDIO_SOURCE_MIC_VOICE_COMMUNICATION;
return true;
}
if (!strcmp(optarg, "voice-call")) {
*source = SC_AUDIO_SOURCE_VOICE_CALL;
return true;
}
if (!strcmp(optarg, "voice-call-uplink")) {
*source = SC_AUDIO_SOURCE_VOICE_CALL_UPLINK;
return true;
}
if (!strcmp(optarg, "voice-call-downlink")) {
*source = SC_AUDIO_SOURCE_VOICE_CALL_DOWNLINK;
return true;
}
if (!strcmp(optarg, "voice-performance")) {
*source = SC_AUDIO_SOURCE_VOICE_PERFORMANCE;
return true;
}
LOGE("Unsupported audio source: %s (expected output, mic, playback, "
"mic-unprocessed, mic-camcorder, mic-voice-recognition, "
"mic-voice-communication, voice-call, voice-call-uplink, "
"voice-call-downlink, voice-performance)", optarg);
return false;
}
@@ -2675,6 +2794,9 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
case OPT_CAMERA_HIGH_SPEED:
opts->camera_high_speed = true;
break;
case OPT_CAMERA_TORCH:
opts->camera_torch = true;
break;
case OPT_NO_WINDOW:
opts->window = false;
break;
@@ -2704,8 +2826,17 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
case OPT_ANGLE:
opts->angle = optarg;
break;
case OPT_NO_VD_DESTROY_CONTENT:
opts->vd_destroy_content = false;
break;
case OPT_NO_VD_SYSTEM_DECORATIONS:
opts->vd_system_decorations = optarg;
opts->vd_system_decorations = false;
break;
case OPT_DISPLAY_IME_POLICY:
if (!parse_display_ime_policy(optarg,
&opts->display_ime_policy)) {
return false;
}
break;
default:
// getopt prints the error message on stderr
@@ -2745,9 +2876,10 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
#endif
if (!opts->window) {
// Without window, there cannot be any video playback or control
// Without window, there cannot be any video playback
opts->video_playback = false;
opts->control = false;
// Controls are still possible, allowing for options like
// --turn-screen-off
}
if (!opts->video) {
@@ -2813,7 +2945,7 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
}
#endif
if (opts->control) {
if (opts->control && opts->video_source == SC_VIDEO_SOURCE_DISPLAY) {
if (opts->keyboard_input_mode == SC_KEYBOARD_INPUT_MODE_AUTO) {
opts->keyboard_input_mode = otg ? SC_KEYBOARD_INPUT_MODE_AOA
: SC_KEYBOARD_INPUT_MODE_SDK;
@@ -2962,6 +3094,12 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
return false;
}
if (opts->display_ime_policy != SC_DISPLAY_IME_POLICY_UNDEFINED) {
LOGE("--display-ime-policy is only available with "
"--video-source=display");
return false;
}
if (opts->camera_id && opts->camera_facing != SC_CAMERA_FACING_ANY) {
LOGE("Cannot specify both --camera-id and --camera-facing");
return false;
@@ -2985,8 +3123,10 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
}
if (opts->control) {
LOGI("Camera video source: control disabled");
opts->control = false;
// Disable all inputs for camera
opts->keyboard_input_mode = SC_KEYBOARD_INPUT_MODE_DISABLED;
opts->mouse_input_mode = SC_MOUSE_INPUT_MODE_DISABLED;
opts->gamepad_input_mode = SC_GAMEPAD_INPUT_MODE_DISABLED;
}
} else if (opts->camera_id
|| opts->camera_ar
@@ -3003,6 +3143,12 @@ parse_args_with_getopt(struct scrcpy_cli_args *args, int argc, char *argv[],
return false;
}
if (opts->display_ime_policy != SC_DISPLAY_IME_POLICY_UNDEFINED
&& opts->display_id == 0 && !opts->new_display) {
LOGE("--display-ime-policy is only supported on a secondary display");
return false;
}
if (opts->audio && opts->audio_source == SC_AUDIO_SOURCE_AUTO) {
// Select the audio source according to the video source
if (opts->video_source == SC_VIDEO_SOURCE_DISPLAY) {

View File

@@ -6,7 +6,7 @@
#include <libavcodec/version.h>
#include <libavformat/version.h>
#include <libavutil/version.h>
#include <SDL2/SDL_version.h>
#include <SDL3/SDL_version.h>
#ifndef _WIN32
# define PRIu64_ PRIu64
@@ -61,20 +61,6 @@
# define SCRCPY_LAVC_HAS_CODECPAR_CODEC_SIDEDATA
#endif
#if SDL_VERSION_ATLEAST(2, 0, 6)
// <https://github.com/libsdl-org/SDL/commit/d7a318de563125e5bb465b1000d6bc9576fbc6fc>
# define SCRCPY_SDL_HAS_HINT_TOUCH_MOUSE_EVENTS
#endif
#if SDL_VERSION_ATLEAST(2, 0, 8)
// <https://hg.libsdl.org/SDL/rev/dfde5d3f9781>
# define SCRCPY_SDL_HAS_HINT_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR
#endif
#if SDL_VERSION_ATLEAST(2, 0, 16)
# define SCRCPY_SDL_HAS_THREAD_PRIORITY_TIME_CRITICAL
#endif
#ifndef HAVE_STRDUP
char *strdup(const char *s);
#endif

View File

@@ -127,10 +127,14 @@ sc_control_msg_serialize(const struct sc_control_msg *msg, uint8_t *buf) {
return 32;
case SC_CONTROL_MSG_TYPE_INJECT_SCROLL_EVENT:
write_position(&buf[1], &msg->inject_scroll_event.position);
int16_t hscroll =
sc_float_to_i16fp(msg->inject_scroll_event.hscroll);
int16_t vscroll =
sc_float_to_i16fp(msg->inject_scroll_event.vscroll);
// Accept values in the range [-16, 16].
// Normalize to [-1, 1] in order to use sc_float_to_i16fp().
float hscroll_norm = msg->inject_scroll_event.hscroll / 16;
hscroll_norm = CLAMP(hscroll_norm, -1, 1);
float vscroll_norm = msg->inject_scroll_event.vscroll / 16;
vscroll_norm = CLAMP(vscroll_norm, -1, 1);
int16_t hscroll = sc_float_to_i16fp(hscroll_norm);
int16_t vscroll = sc_float_to_i16fp(vscroll_norm);
sc_write16be(&buf[13], (uint16_t) hscroll);
sc_write16be(&buf[15], (uint16_t) vscroll);
sc_write32be(&buf[17], msg->inject_scroll_event.buttons);
@@ -152,8 +156,10 @@ sc_control_msg_serialize(const struct sc_control_msg *msg, uint8_t *buf) {
return 2;
case SC_CONTROL_MSG_TYPE_UHID_CREATE:
sc_write16be(&buf[1], msg->uhid_create.id);
sc_write16be(&buf[3], msg->uhid_create.vendor_id);
sc_write16be(&buf[5], msg->uhid_create.product_id);
size_t index = 3;
size_t index = 7;
index += write_string_tiny(&buf[index], msg->uhid_create.name, 127);
sc_write16be(&buf[index], msg->uhid_create.report_desc_size);
@@ -176,6 +182,9 @@ sc_control_msg_serialize(const struct sc_control_msg *msg, uint8_t *buf) {
size_t len = write_string_tiny(&buf[1], msg->start_app.name, 255);
return 1 + len;
}
case SC_CONTROL_MSG_TYPE_CAMERA_SET_TORCH:
buf[1] = msg->camera_set_torch.on ? 1 : 0;
return 2;
case SC_CONTROL_MSG_TYPE_EXPAND_NOTIFICATION_PANEL:
case SC_CONTROL_MSG_TYPE_EXPAND_SETTINGS_PANEL:
case SC_CONTROL_MSG_TYPE_COLLAPSE_PANELS:
@@ -278,9 +287,13 @@ sc_control_msg_log(const struct sc_control_msg *msg) {
// Quote only if name is not null
const char *name = msg->uhid_create.name;
const char *quote = name ? "\"" : "";
LOG_CMSG("UHID create [%" PRIu16 "] name=%s%s%s "
"report_desc_size=%" PRIu16, msg->uhid_create.id,
quote, name, quote, msg->uhid_create.report_desc_size);
LOG_CMSG("UHID create [%" PRIu16 "] %04" PRIx16 ":%04" PRIx16
" name=%s%s%s report_desc_size=%" PRIu16,
msg->uhid_create.id,
msg->uhid_create.vendor_id,
msg->uhid_create.product_id,
quote, name, quote,
msg->uhid_create.report_desc_size);
break;
}
case SC_CONTROL_MSG_TYPE_UHID_INPUT: {

View File

@@ -43,6 +43,7 @@ enum sc_control_msg_type {
SC_CONTROL_MSG_TYPE_OPEN_HARD_KEYBOARD_SETTINGS,
SC_CONTROL_MSG_TYPE_START_APP,
SC_CONTROL_MSG_TYPE_RESET_VIDEO,
SC_CONTROL_MSG_TYPE_CAMERA_SET_TORCH,
};
enum sc_copy_key {
@@ -94,6 +95,8 @@ struct sc_control_msg {
} set_display_power;
struct {
uint16_t id;
uint16_t vendor_id;
uint16_t product_id;
const char *name; // pointer to static data
uint16_t report_desc_size;
const uint8_t *report_desc; // pointer to static data
@@ -109,6 +112,9 @@ struct sc_control_msg {
struct {
char *name;
} start_app;
struct {
bool on;
} camera_set_torch;
};
};

View File

@@ -1,31 +1,39 @@
#include "decoder.h"
#include <libavcodec/avcodec.h>
#include <libavformat/avformat.h>
#include <libavutil/channel_layout.h>
#include <errno.h>
#include <libavcodec/packet.h>
#include <libavutil/avutil.h>
#include "events.h"
#include "trait/frame_sink.h"
#include "util/log.h"
/** Downcast packet_sink to decoder */
#define DOWNCAST(SINK) container_of(SINK, struct sc_decoder, packet_sink)
static bool
sc_decoder_open(struct sc_decoder *decoder, AVCodecContext *ctx) {
sc_decoder_open(struct sc_decoder *decoder, AVCodecContext *ctx,
const struct sc_stream_session *session) {
decoder->frame = av_frame_alloc();
if (!decoder->frame) {
LOG_OOM();
return false;
}
if (!sc_frame_source_sinks_open(&decoder->frame_source, ctx)) {
if (!sc_frame_source_sinks_open(&decoder->frame_source, ctx, session)) {
av_frame_free(&decoder->frame);
return false;
}
decoder->ctx = ctx;
// A video stream must have a session
assert(session || ctx->codec_type != AVMEDIA_TYPE_VIDEO);
if (session) {
decoder->session = *session;
}
memset(&decoder->frame_size, 0, sizeof(decoder->frame_size));
return true;
}
@@ -63,6 +71,32 @@ sc_decoder_push(struct sc_decoder *decoder, const AVPacket *packet) {
}
// a frame was received
if (decoder->ctx->codec_type == AVMEDIA_TYPE_VIDEO) {
assert(decoder->frame->width >= 0);
assert(decoder->frame->height >= 0);
struct sc_size frame_size = {
.width = decoder->frame->width,
.height = decoder->frame->height,
};
if (decoder->frame_size.width != frame_size.width
|| decoder->frame_size.height != frame_size.height) {
// The frame size has changed, check if it matches the session
uint32_t sw = decoder->session.video.width;
uint32_t sh = decoder->session.video.height;
if (frame_size.width != sw || frame_size.height != sh) {
LOGW("Unexpected video size: %" PRIu32 "x%" PRIu32
" (expected %" PRIu32 "x%" PRIu32 ")",
frame_size.width, frame_size.height, sw, sh);
LOGW("The encoder did not respect the requested size, "
"please retry with a lower resolution (-m/--max-size)");
}
}
decoder->frame_size = frame_size;
}
bool ok = sc_frame_source_sinks_push(&decoder->frame_source,
decoder->frame);
av_frame_unref(decoder->frame);
@@ -76,9 +110,17 @@ sc_decoder_push(struct sc_decoder *decoder, const AVPacket *packet) {
}
static bool
sc_decoder_packet_sink_open(struct sc_packet_sink *sink, AVCodecContext *ctx) {
sc_decoder_push_session(struct sc_decoder *decoder,
const struct sc_stream_session *session) {
decoder->session = *session;
return sc_frame_source_sinks_push_session(&decoder->frame_source, session);
}
static bool
sc_decoder_packet_sink_open(struct sc_packet_sink *sink, AVCodecContext *ctx,
const struct sc_stream_session *session) {
struct sc_decoder *decoder = DOWNCAST(sink);
return sc_decoder_open(decoder, ctx);
return sc_decoder_open(decoder, ctx, session);
}
static void
@@ -94,6 +136,14 @@ sc_decoder_packet_sink_push(struct sc_packet_sink *sink,
return sc_decoder_push(decoder, packet);
}
static bool
sc_decoder_packet_sink_push_session(struct sc_packet_sink *sink,
const struct sc_stream_session *session) {
struct sc_decoder *decoder = DOWNCAST(sink);
return sc_decoder_push_session(decoder, session);
}
void
sc_decoder_init(struct sc_decoder *decoder, const char *name) {
decoder->name = name; // statically allocated
@@ -103,6 +153,7 @@ sc_decoder_init(struct sc_decoder *decoder, const char *name) {
.open = sc_decoder_packet_sink_open,
.close = sc_decoder_packet_sink_close,
.push = sc_decoder_packet_sink_push,
.push_session = sc_decoder_packet_sink_push_session,
};
decoder->packet_sink.ops = &ops;

View File

@@ -3,13 +3,12 @@
#include "common.h"
#include <libavcodec/avcodec.h>
#include "coords.h"
#include "trait/frame_source.h"
#include "trait/packet_sink.h"
#include <stdbool.h>
#include <libavcodec/avcodec.h>
#include <libavformat/avformat.h>
struct sc_decoder {
struct sc_packet_sink packet_sink; // packet sink trait
struct sc_frame_source frame_source; // frame source trait
@@ -18,6 +17,9 @@ struct sc_decoder {
AVCodecContext *ctx;
AVFrame *frame;
struct sc_stream_session session; // only initialized for video stream
struct sc_size frame_size;
};
// The name must be statically allocated (e.g. a string literal)

View File

@@ -2,9 +2,7 @@
#include <assert.h>
#include <stdlib.h>
#include <libavutil/avutil.h>
#include <libavformat/avformat.h>
#include <libavcodec/avcodec.h>
#include "util/log.h"
@@ -12,16 +10,18 @@
#define DOWNCAST(SINK) container_of(SINK, struct sc_delay_buffer, frame_sink)
static bool
sc_delayed_frame_init(struct sc_delayed_frame *dframe, const AVFrame *frame) {
dframe->frame = av_frame_alloc();
if (!dframe->frame) {
sc_delayed_packet_init_frame(struct sc_delayed_packet *dpacket,
const AVFrame *frame) {
dpacket->type = SC_DELAYED_PACKET_TYPE_FRAME;
dpacket->frame = av_frame_alloc();
if (!dpacket->frame) {
LOG_OOM();
return false;
}
if (av_frame_ref(dframe->frame, frame)) {
if (av_frame_ref(dpacket->frame, frame)) {
LOG_OOM();
av_frame_free(&dframe->frame);
av_frame_free(&dpacket->frame);
return false;
}
@@ -29,9 +29,18 @@ sc_delayed_frame_init(struct sc_delayed_frame *dframe, const AVFrame *frame) {
}
static void
sc_delayed_frame_destroy(struct sc_delayed_frame *dframe) {
av_frame_unref(dframe->frame);
av_frame_free(&dframe->frame);
sc_delayed_packet_init_session(struct sc_delayed_packet *dpacket,
const struct sc_stream_session *session) {
dpacket->type = SC_DELAYED_PACKET_TYPE_SESSION;
dpacket->session = *session;
}
static void
sc_delayed_packet_destroy(struct sc_delayed_packet *dpacket) {
if (dpacket->type == SC_DELAYED_PACKET_TYPE_FRAME) {
av_frame_unref(dpacket->frame);
av_frame_free(&dpacket->frame);
}
}
static int
@@ -52,43 +61,52 @@ run_buffering(void *data) {
goto stopped;
}
struct sc_delayed_frame dframe = sc_vecdeque_pop(&db->queue);
struct sc_delayed_packet dpacket = sc_vecdeque_pop(&db->queue);
sc_tick max_deadline = sc_tick_now() + db->delay;
// PTS (written by the server) are expressed in microseconds
sc_tick pts = SC_TICK_FROM_US(dframe.frame->pts);
bool ok;
if (dpacket.type == SC_DELAYED_PACKET_TYPE_FRAME) {
sc_tick max_deadline = sc_tick_now() + db->delay;
// PTS (written by the server) are expressed in microseconds
sc_tick pts = SC_TICK_FROM_US(dpacket.frame->pts);
bool timed_out = false;
while (!db->stopped && !timed_out) {
sc_tick deadline = sc_clock_to_system_time(&db->clock, pts)
+ db->delay;
if (deadline > max_deadline) {
deadline = max_deadline;
bool timed_out = false;
while (!db->stopped && !timed_out) {
sc_tick deadline = sc_clock_to_system_time(&db->clock, pts)
+ db->delay;
if (deadline > max_deadline) {
deadline = max_deadline;
}
timed_out =
!sc_cond_timedwait(&db->wait_cond, &db->mutex, deadline);
}
timed_out =
!sc_cond_timedwait(&db->wait_cond, &db->mutex, deadline);
}
bool stopped = db->stopped;
sc_mutex_unlock(&db->mutex);
bool stopped = db->stopped;
sc_mutex_unlock(&db->mutex);
if (stopped) {
sc_delayed_frame_destroy(&dframe);
goto stopped;
}
if (stopped) {
sc_delayed_packet_destroy(&dpacket);
goto stopped;
}
#ifdef SC_BUFFERING_DEBUG
LOGD("Buffering: %" PRItick ";%" PRItick ";%" PRItick,
pts, dframe.push_date, sc_tick_now());
LOGD("Buffering: %" PRItick ";%" PRItick ";%" PRItick,
pts, dframe.push_date, sc_tick_now());
#endif
bool ok = sc_frame_source_sinks_push(&db->frame_source, dframe.frame);
sc_delayed_frame_destroy(&dframe);
ok = sc_frame_source_sinks_push(&db->frame_source, dpacket.frame);
} else {
assert(dpacket.type == SC_DELAYED_PACKET_TYPE_SESSION);
sc_mutex_unlock(&db->mutex);
ok = sc_frame_source_sinks_push_session(&db->frame_source,
&dpacket.session);
}
sc_delayed_packet_destroy(&dpacket);
if (!ok) {
LOGE("Delayed frame could not be pushed, stopping");
LOGE("Delayed packet could not be pushed, stopping");
sc_mutex_lock(&db->mutex);
// Prevent to push any new frame
// Prevent to push any new packet
db->stopped = true;
sc_mutex_unlock(&db->mutex);
goto stopped;
@@ -100,8 +118,8 @@ stopped:
// Flush queue
while (!sc_vecdeque_is_empty(&db->queue)) {
struct sc_delayed_frame *dframe = sc_vecdeque_popref(&db->queue);
sc_delayed_frame_destroy(dframe);
struct sc_delayed_packet *dpacket = sc_vecdeque_popref(&db->queue);
sc_delayed_packet_destroy(dpacket);
}
LOGD("Buffering thread ended");
@@ -111,9 +129,11 @@ stopped:
static bool
sc_delay_buffer_frame_sink_open(struct sc_frame_sink *sink,
const AVCodecContext *ctx) {
const AVCodecContext *ctx,
const struct sc_stream_session *session) {
struct sc_delay_buffer *db = DOWNCAST(sink);
(void) ctx;
(void) session;
bool ok = sc_mutex_init(&db->mutex);
if (!ok) {
@@ -134,7 +154,7 @@ sc_delay_buffer_frame_sink_open(struct sc_frame_sink *sink,
sc_vecdeque_init(&db->queue);
db->stopped = false;
if (!sc_frame_source_sinks_open(&db->frame_source, ctx)) {
if (!sc_frame_source_sinks_open(&db->frame_source, ctx, session)) {
goto error_destroy_wait_cond;
}
@@ -198,24 +218,56 @@ sc_delay_buffer_frame_sink_push(struct sc_frame_sink *sink,
return sc_frame_source_sinks_push(&db->frame_source, frame);
}
struct sc_delayed_frame dframe;
bool ok = sc_delayed_frame_init(&dframe, frame);
if (!ok) {
struct sc_delayed_packet *dpacket = sc_vecdeque_push_hole(&db->queue);
if (!dpacket) {
sc_mutex_unlock(&db->mutex);
LOG_OOM();
return false;
}
#ifdef SC_BUFFERING_DEBUG
dframe.push_date = sc_tick_now();
#endif
ok = sc_vecdeque_push(&db->queue, dframe);
bool ok = sc_delayed_packet_init_frame(dpacket, frame);
if (!ok) {
sc_mutex_unlock(&db->mutex);
LOG_OOM();
return false;
}
#ifdef SC_BUFFERING_DEBUG
dpacket->push_date = sc_tick_now();
#endif
sc_cond_signal(&db->queue_cond);
sc_mutex_unlock(&db->mutex);
return true;
}
static bool
sc_delay_buffer_frame_sink_push_session(struct sc_frame_sink *sink,
const struct sc_stream_session *session) {
struct sc_delay_buffer *db = DOWNCAST(sink);
sc_mutex_lock(&db->mutex);
if (db->stopped) {
sc_mutex_unlock(&db->mutex);
return false;
}
struct sc_delayed_packet *dpacket = sc_vecdeque_push_hole(&db->queue);
if (!dpacket) {
sc_mutex_unlock(&db->mutex);
LOG_OOM();
return false;
}
sc_delayed_packet_init_session(dpacket, session);
#ifdef SC_BUFFERING_DEBUG
dpacket->push_date = sc_tick_now();
#endif
sc_cond_signal(&db->queue_cond);
sc_mutex_unlock(&db->mutex);
@@ -237,6 +289,7 @@ sc_delay_buffer_init(struct sc_delay_buffer *db, sc_tick delay,
.open = sc_delay_buffer_frame_sink_open,
.close = sc_delay_buffer_frame_sink_close,
.push = sc_delay_buffer_frame_sink_push,
.push_session = sc_delay_buffer_frame_sink_push_session,
};
db->frame_sink.ops = &ops;

View File

@@ -4,6 +4,7 @@
#include "common.h"
#include <stdbool.h>
#include <libavutil/frame.h>
#include "clock.h"
#include "trait/frame_source.h"
@@ -17,14 +18,23 @@
// forward declarations
typedef struct AVFrame AVFrame;
struct sc_delayed_frame {
AVFrame *frame;
enum sc_delayed_packet_type {
SC_DELAYED_PACKET_TYPE_FRAME,
SC_DELAYED_PACKET_TYPE_SESSION,
};
struct sc_delayed_packet {
enum sc_delayed_packet_type type;
union {
AVFrame *frame;
struct sc_stream_session session;
};
#ifdef SC_BUFFERING_DEBUG
sc_tick push_date;
#endif
};
struct sc_delayed_frame_queue SC_VECDEQUE(struct sc_delayed_frame);
struct sc_delayed_packet_queue SC_VECDEQUE(struct sc_delayed_packet);
struct sc_delay_buffer {
struct sc_frame_source frame_source; // frame source trait
@@ -39,7 +49,7 @@ struct sc_delay_buffer {
sc_cond wait_cond;
struct sc_clock clock;
struct sc_delayed_frame_queue queue;
struct sc_delayed_packet_queue queue;
bool stopped;
};

View File

@@ -1,21 +1,18 @@
#include "demuxer.h"
#include <assert.h>
#include <inttypes.h>
#include <libavcodec/avcodec.h>
#include <libavutil/channel_layout.h>
#include <libavutil/time.h>
#include <unistd.h>
#include "decoder.h"
#include "events.h"
#include "packet_merger.h"
#include "recorder.h"
#include "util/binary.h"
#include "util/log.h"
#define SC_PACKET_HEADER_SIZE 12
#define SC_PACKET_FLAG_CONFIG (UINT64_C(1) << 63)
#define SC_PACKET_FLAG_KEY_FRAME (UINT64_C(1) << 62)
#define SC_PACKET_FLAG_CONFIG (UINT64_C(1) << 62)
#define SC_PACKET_FLAG_KEY_FRAME (UINT64_C(1) << 61)
#define SC_PACKET_PTS_MASK (SC_PACKET_FLAG_KEY_FRAME - 1)
@@ -66,48 +63,75 @@ sc_demuxer_recv_codec_id(struct sc_demuxer *demuxer, uint32_t *codec_id) {
return true;
}
static bool
sc_demuxer_recv_video_size(struct sc_demuxer *demuxer, uint32_t *width,
uint32_t *height) {
uint8_t data[8];
ssize_t r = net_recv_all(demuxer->socket, data, 8);
if (r < 8) {
return false;
}
*width = sc_read32be(data);
*height = sc_read32be(data + 4);
return true;
}
static bool
sc_demuxer_recv_packet(struct sc_demuxer *demuxer, AVPacket *packet) {
static inline bool
sc_demuxer_recv_header(struct sc_demuxer *demuxer,
uint8_t buf[static SC_PACKET_HEADER_SIZE]) {
// The video and audio streams contain a sequence of raw packets (as
// provided by MediaCodec), each prefixed with a "meta" header.
//
// The "meta" header length is 12 bytes:
// The "meta" header length is 12 bytes.
//
//
// If the MSB is 1, then it is a session packet (for a video stream only),
// which only contains a 12-byte header:
//
// byte 0 byte 1 byte 2 byte 3
// 10000000 00000000 00000000 00000000
// ^<-------------------------------->
// | padding
// `- session packet flag
//
// byte 4 byte 5 byte 6 byte 7 byte 8 byte 9 byte 10 byte 11
// ........ ........ ........ ........ ........ ........ ........ ........
// <---------------------------------> <--------------------------------->
// video width video height
//
//
// If the MSB is 0, then it is a media packet, comprised of a 12-byte header
// followed by <packet_size> bytes containing the packet/frame:
//
// [. . . . . . . .|. . . .]. . . . . . . . . . . . . . . ...
// <-------------> <-----> <-----------------------------...
// PTS packet raw packet
// size
//
// It is followed by <packet_size> bytes containing the packet/frame.
//
// The most significant bits of the PTS are used for packet flags:
//
// byte 7 byte 6 byte 5 byte 4 byte 3 byte 2 byte 1 byte 0
// CK...... ........ ........ ........ ........ ........ ........ ........
// ^^<------------------------------------------------------------------->
// || PTS
// | `- key frame
// `-- config packet
// byte 0 byte 1 byte 2 byte 3 byte 4 byte 5 byte 6 byte 7
// 0CK..... ........ ........ ........ ........ ........ ........ ........
// ^^^<------------------------------------------------------------------>
// ||| PTS
// || `- key frame
// | `-- config packet
// `--- media packet flag
//
// byte 8 byte 9 byte 10 byte 11
// ........ ........ ........ ........ ........ ........ . . .
// <---------------------------------> <---------------- . . .
// packet size raw packet
//
ssize_t r = net_recv_all(demuxer->socket, buf, SC_PACKET_HEADER_SIZE);
assert(r <= SC_PACKET_HEADER_SIZE);
return r == SC_PACKET_HEADER_SIZE;
}
uint8_t header[SC_PACKET_HEADER_SIZE];
ssize_t r = net_recv_all(demuxer->socket, header, SC_PACKET_HEADER_SIZE);
if (r < SC_PACKET_HEADER_SIZE) {
return false;
}
static bool
sc_demuxer_is_session(const uint8_t *header) {
return header[0] & 0x80;
}
static void
sc_demuxer_parse_session(const uint8_t *header,
struct sc_stream_session *session) {
assert(sc_demuxer_is_session(header));
session->video.width = sc_read32be(&header[4]);
session->video.height = sc_read32be(&header[8]);
}
static bool
sc_demuxer_recv_packet(struct sc_demuxer *demuxer, const uint8_t *header,
AVPacket *packet) {
assert(!sc_demuxer_is_session(header));
uint64_t pts_flags = sc_read64be(header);
uint32_t len = sc_read32be(&header[8]);
assert(len);
@@ -117,7 +141,7 @@ sc_demuxer_recv_packet(struct sc_demuxer *demuxer, AVPacket *packet) {
return false;
}
r = net_recv_all(demuxer->socket, packet->data, len);
ssize_t r = net_recv_all(demuxer->socket, packet->data, len);
if (r < 0 || ((uint32_t) r) < len) {
av_packet_unref(packet);
return false;
@@ -190,17 +214,28 @@ run_demuxer(void *data) {
codec_ctx->flags |= AV_CODEC_FLAG_LOW_DELAY;
uint8_t header[SC_PACKET_HEADER_SIZE];
struct sc_stream_session session_data;
struct sc_stream_session *session = NULL;
if (codec->type == AVMEDIA_TYPE_VIDEO) {
uint32_t width;
uint32_t height;
ok = sc_demuxer_recv_video_size(demuxer, &width, &height);
bool ok = sc_demuxer_recv_header(demuxer, header);
if (!ok) {
goto finally_free_context;
}
codec_ctx->width = width;
codec_ctx->height = height;
if (!sc_demuxer_is_session(header)) {
LOGE("Unexpected packet (not a session header)");
goto finally_free_context;
}
session = &session_data;
sc_demuxer_parse_session(header, session);
codec_ctx->width = session_data.video.width;
codec_ctx->height = session_data.video.height;
codec_ctx->pix_fmt = AV_PIX_FMT_YUV420P;
} else {
// Hardcoded audio properties
#ifdef SCRCPY_LAVU_HAS_CHLAYOUT
@@ -222,7 +257,8 @@ run_demuxer(void *data) {
goto finally_free_context;
}
if (!sc_packet_source_sinks_open(&demuxer->packet_source, codec_ctx)) {
if (!sc_packet_source_sinks_open(&demuxer->packet_source, codec_ctx,
session)) {
goto finally_free_context;
}
@@ -244,27 +280,39 @@ run_demuxer(void *data) {
}
for (;;) {
bool ok = sc_demuxer_recv_packet(demuxer, packet);
bool ok = sc_demuxer_recv_header(demuxer, header);
if (!ok) {
// end of stream
status = SC_DEMUXER_STATUS_EOS;
break;
}
if (must_merge_config_packet) {
// Prepend any config packet to the next media packet
ok = sc_packet_merger_merge(&merger, packet);
if (sc_demuxer_is_session(header)) {
sc_demuxer_parse_session(header, &session_data);
ok = sc_packet_source_sinks_push_session(&demuxer->packet_source,
&session_data);
if (!ok) {
av_packet_unref(packet);
// The sink already logged its concrete error
break;
}
}
} else {
sc_demuxer_recv_packet(demuxer, header, packet);
ok = sc_packet_source_sinks_push(&demuxer->packet_source, packet);
av_packet_unref(packet);
if (!ok) {
// The sink already logged its concrete error
break;
if (must_merge_config_packet) {
// Prepend any config packet to the next media packet
ok = sc_packet_merger_merge(&merger, packet);
if (!ok) {
av_packet_unref(packet);
break;
}
}
ok = sc_packet_source_sinks_push(&demuxer->packet_source, packet);
av_packet_unref(packet);
if (!ok) {
// The sink already logged its concrete error
break;
}
}
}

View File

@@ -4,12 +4,8 @@
#include "common.h"
#include <stdbool.h>
#include <stdint.h>
#include <libavcodec/avcodec.h>
#include <libavformat/avformat.h>
#include "trait/packet_source.h"
#include "trait/packet_sink.h"
#include "util/net.h"
#include "util/thread.h"

View File

@@ -53,7 +53,7 @@ sc_device_msg_deserialize(const uint8_t *buf, size_t len,
}
uint16_t id = sc_read16be(&buf[1]);
size_t size = sc_read16be(&buf[3]);
if (size < len - 5) {
if (size > len - 5) {
return 0; // not available
}
uint8_t *data = malloc(size);

View File

@@ -3,9 +3,9 @@
#include "common.h"
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#include <unistd.h>
#include <sys/types.h>
#define DEVICE_MSG_MAX_SIZE (1 << 18) // 256k
// type: 1 byte; length: 4 bytes

View File

@@ -1,17 +1,23 @@
#include "display.h"
#include <assert.h>
#include <inttypes.h>
#include <string.h>
#include <libavutil/pixfmt.h>
#include "util/log.h"
#include "util/sdl.h"
static bool
sc_display_init_novideo_icon(struct sc_display *display,
SDL_Surface *icon_novideo) {
assert(icon_novideo);
if (SDL_RenderSetLogicalSize(display->renderer,
icon_novideo->w, icon_novideo->h)) {
bool ok = SDL_SetRenderLogicalPresentation(display->renderer,
icon_novideo->w,
icon_novideo->h,
SDL_LOGICAL_PRESENTATION_LETTERBOX);
if (!ok) {
LOGW("Could not set renderer logical size: %s", SDL_GetError());
// don't fail
}
@@ -29,16 +35,13 @@ sc_display_init_novideo_icon(struct sc_display *display,
bool
sc_display_init(struct sc_display *display, SDL_Window *window,
SDL_Surface *icon_novideo, bool mipmaps) {
display->renderer =
SDL_CreateRenderer(window, -1, SDL_RENDERER_ACCELERATED);
display->renderer = SDL_CreateRenderer(window, NULL);
if (!display->renderer) {
LOGE("Could not create renderer: %s", SDL_GetError());
return false;
}
SDL_RendererInfo renderer_info;
int r = SDL_GetRendererInfo(display->renderer, &renderer_info);
const char *renderer_name = r ? NULL : renderer_info.name;
const char *renderer_name = SDL_GetRendererName(display->renderer);
LOGI("Renderer: %s", renderer_name ? renderer_name : "(unknown)");
display->mipmaps = false;
@@ -54,8 +57,11 @@ sc_display_init(struct sc_display *display, SDL_Window *window,
#ifdef SC_DISPLAY_FORCE_OPENGL_CORE_PROFILE
// Persuade macOS to give us something better than OpenGL 2.1.
// If we create a Core Profile context, we get the best OpenGL version.
SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK,
SDL_GL_CONTEXT_PROFILE_CORE);
bool ok = SDL_GL_SetAttribute(SDL_GL_CONTEXT_PROFILE_MASK,
SDL_GL_CONTEXT_PROFILE_CORE);
if (!ok) {
LOGW("Could not set a GL Core Profile Context");
}
LOGD("Creating OpenGL Core Profile context");
display->gl_context = SDL_GL_CreateContext(window);
@@ -92,14 +98,13 @@ sc_display_init(struct sc_display *display, SDL_Window *window,
display->texture = NULL;
display->pending.flags = 0;
display->pending.frame = NULL;
display->has_frame = false;
if (icon_novideo) {
// Without video, set a static scrcpy icon as window content
bool ok = sc_display_init_novideo_icon(display, icon_novideo);
if (!ok) {
#ifdef SC_DISPLAY_FORCE_OPENGL_CORE_PROFILE
SDL_GL_DeleteContext(display->gl_context);
SDL_GL_DestroyContext(display->gl_context);
#endif
SDL_DestroyRenderer(display->renderer);
return false;
@@ -115,7 +120,7 @@ sc_display_destroy(struct sc_display *display) {
av_frame_free(&display->pending.frame);
}
#ifdef SC_DISPLAY_FORCE_OPENGL_CORE_PROFILE
SDL_GL_DeleteContext(display->gl_context);
SDL_GL_DestroyContext(display->gl_context);
#endif
if (display->texture) {
SDL_DestroyTexture(display->texture);
@@ -123,13 +128,63 @@ sc_display_destroy(struct sc_display *display) {
SDL_DestroyRenderer(display->renderer);
}
static enum SDL_Colorspace
sc_display_to_sdl_color_space(enum AVColorSpace color_space,
enum AVColorRange color_range) {
bool full_range = color_range == AVCOL_RANGE_JPEG;
switch (color_space) {
case AVCOL_SPC_BT709:
case AVCOL_SPC_RGB:
return full_range ? SDL_COLORSPACE_BT709_FULL
: SDL_COLORSPACE_BT709_LIMITED;
case AVCOL_SPC_BT470BG:
case AVCOL_SPC_SMPTE170M:
return full_range ? SDL_COLORSPACE_BT601_FULL
: SDL_COLORSPACE_BT601_LIMITED;
case AVCOL_SPC_BT2020_NCL:
case AVCOL_SPC_BT2020_CL:
return full_range ? SDL_COLORSPACE_BT2020_FULL
: SDL_COLORSPACE_BT2020_LIMITED;
default:
return SDL_COLORSPACE_JPEG;
}
}
static SDL_Texture *
sc_display_create_texture(struct sc_display *display,
struct sc_size size) {
struct sc_size size, enum AVColorSpace color_space,
enum AVColorRange color_range) {
SDL_PropertiesID props = SDL_CreateProperties();
if (!props) {
return NULL;
}
enum SDL_Colorspace sdl_color_space =
sc_display_to_sdl_color_space(color_space, color_range);
bool ok =
SDL_SetNumberProperty(props, SDL_PROP_TEXTURE_CREATE_FORMAT_NUMBER,
SDL_PIXELFORMAT_YV12);
ok &= SDL_SetNumberProperty(props, SDL_PROP_TEXTURE_CREATE_ACCESS_NUMBER,
SDL_TEXTUREACCESS_STREAMING);
ok &= SDL_SetNumberProperty(props, SDL_PROP_TEXTURE_CREATE_WIDTH_NUMBER,
size.width);
ok &= SDL_SetNumberProperty(props, SDL_PROP_TEXTURE_CREATE_HEIGHT_NUMBER,
size.height);
ok &= SDL_SetNumberProperty(props,
SDL_PROP_TEXTURE_CREATE_COLORSPACE_NUMBER,
sdl_color_space);
if (!ok) {
LOGE("Could not set texture properties");
SDL_DestroyProperties(props);
return NULL;
}
SDL_Renderer *renderer = display->renderer;
SDL_Texture *texture = SDL_CreateTexture(renderer, SDL_PIXELFORMAT_YV12,
SDL_TEXTUREACCESS_STREAMING,
size.width, size.height);
SDL_Texture *texture = SDL_CreateTextureWithProperties(renderer, props);
SDL_DestroyProperties(props);
if (!texture) {
LOGD("Could not create texture: %s", SDL_GetError());
return NULL;
@@ -138,24 +193,49 @@ sc_display_create_texture(struct sc_display *display,
if (display->mipmaps) {
struct sc_opengl *gl = &display->gl;
SDL_GL_BindTexture(texture, NULL, NULL);
SDL_PropertiesID props = SDL_GetTextureProperties(texture);
if (!props) {
LOGE("Could not get texture properties: %s", SDL_GetError());
SDL_DestroyTexture(texture);
return NULL;
}
const char *renderer_name = SDL_GetRendererName(display->renderer);
const char *key = !renderer_name || !strcmp(renderer_name, "opengl")
? SDL_PROP_TEXTURE_OPENGL_TEXTURE_NUMBER
: SDL_PROP_TEXTURE_OPENGLES2_TEXTURE_NUMBER;
int64_t texture_id = SDL_GetNumberProperty(props, key, 0);
SDL_DestroyProperties(props);
if (!texture_id) {
LOGE("Could not get texture id: %s", SDL_GetError());
SDL_DestroyTexture(texture);
return NULL;
}
assert(!(texture_id & ~0xFFFFFFFF)); // fits in uint32_t
display->texture_id = texture_id;
gl->BindTexture(GL_TEXTURE_2D, display->texture_id);
// Enable trilinear filtering for downscaling
gl->TexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER,
GL_LINEAR_MIPMAP_LINEAR);
gl->TexParameterf(GL_TEXTURE_2D, GL_TEXTURE_LOD_BIAS, -1.f);
SDL_GL_UnbindTexture(texture);
gl->BindTexture(GL_TEXTURE_2D, 0);
}
return texture;
}
static inline void
sc_display_set_pending_size(struct sc_display *display, struct sc_size size) {
sc_display_set_pending_texture(struct sc_display *display,
struct sc_size size,
enum AVColorRange color_range) {
assert(!display->texture);
display->pending.size = size;
display->pending.flags |= SC_DISPLAY_PENDING_FLAG_SIZE;
display->pending.texture.size = size;
display->pending.texture.color_range = color_range;
display->pending.flags |= SC_DISPLAY_PENDING_FLAG_TEXTURE;
}
static bool
@@ -168,6 +248,7 @@ sc_display_set_pending_frame(struct sc_display *display, const AVFrame *frame) {
}
}
av_frame_unref(display->pending.frame);
int r = av_frame_ref(display->pending.frame, frame);
if (r) {
LOGE("Could not ref frame: %d", r);
@@ -179,22 +260,31 @@ sc_display_set_pending_frame(struct sc_display *display, const AVFrame *frame) {
return true;
}
// Forward declaration
static bool
sc_display_update_texture_internal(struct sc_display *display,
const AVFrame *frame);
static bool
sc_display_apply_pending(struct sc_display *display) {
if (display->pending.flags & SC_DISPLAY_PENDING_FLAG_SIZE) {
if (display->pending.flags & SC_DISPLAY_PENDING_FLAG_TEXTURE) {
assert(!display->texture);
display->texture =
sc_display_create_texture(display, display->pending.size);
sc_display_create_texture(display,
display->pending.texture.size,
display->pending.texture.color_space,
display->pending.texture.color_range);
if (!display->texture) {
return false;
}
display->pending.flags &= ~SC_DISPLAY_PENDING_FLAG_SIZE;
display->pending.flags &= ~SC_DISPLAY_PENDING_FLAG_TEXTURE;
}
if (display->pending.flags & SC_DISPLAY_PENDING_FLAG_FRAME) {
assert(display->pending.frame);
bool ok = sc_display_update_texture(display, display->pending.frame);
bool ok = sc_display_update_texture_internal(display,
display->pending.frame);
if (!ok) {
return false;
}
@@ -207,15 +297,18 @@ sc_display_apply_pending(struct sc_display *display) {
}
static bool
sc_display_set_texture_size_internal(struct sc_display *display,
struct sc_size size) {
sc_display_prepare_texture_internal(struct sc_display *display,
struct sc_size size,
enum AVColorSpace color_space,
enum AVColorRange color_range) {
assert(size.width && size.height);
if (display->texture) {
SDL_DestroyTexture(display->texture);
}
display->texture = sc_display_create_texture(display, size);
display->texture =
sc_display_create_texture(display, size, color_space, color_range);
if (!display->texture) {
return false;
}
@@ -225,10 +318,13 @@ sc_display_set_texture_size_internal(struct sc_display *display,
}
enum sc_display_result
sc_display_set_texture_size(struct sc_display *display, struct sc_size size) {
bool ok = sc_display_set_texture_size_internal(display, size);
sc_display_prepare_texture(struct sc_display *display, struct sc_size size,
enum AVColorSpace color_space,
enum AVColorRange color_range) {
bool ok = sc_display_prepare_texture_internal(display, size, color_space,
color_range);
if (!ok) {
sc_display_set_pending_size(display, size);
sc_display_set_pending_texture(display, size, color_range);
return SC_DISPLAY_RESULT_PENDING;
}
@@ -236,38 +332,25 @@ sc_display_set_texture_size(struct sc_display *display, struct sc_size size) {
return SC_DISPLAY_RESULT_OK;
}
static SDL_YUV_CONVERSION_MODE
sc_display_to_sdl_color_range(enum AVColorRange color_range) {
return color_range == AVCOL_RANGE_JPEG ? SDL_YUV_CONVERSION_JPEG
: SDL_YUV_CONVERSION_AUTOMATIC;
}
static bool
sc_display_update_texture_internal(struct sc_display *display,
const AVFrame *frame) {
if (!display->has_frame) {
// First frame
display->has_frame = true;
// Configure YUV color range conversion
SDL_YUV_CONVERSION_MODE sdl_color_range =
sc_display_to_sdl_color_range(frame->color_range);
SDL_SetYUVConversionMode(sdl_color_range);
}
int ret = SDL_UpdateYUVTexture(display->texture, NULL,
bool ok = SDL_UpdateYUVTexture(display->texture, NULL,
frame->data[0], frame->linesize[0],
frame->data[1], frame->linesize[1],
frame->data[2], frame->linesize[2]);
if (ret) {
if (!ok) {
LOGD("Could not update texture: %s", SDL_GetError());
return false;
}
if (display->mipmaps) {
SDL_GL_BindTexture(display->texture, NULL, NULL);
assert(display->texture_id);
struct sc_opengl *gl = &display->gl;
gl->BindTexture(GL_TEXTURE_2D, display->texture_id);
display->gl.GenerateMipmap(GL_TEXTURE_2D);
SDL_GL_UnbindTexture(display->texture);
gl->BindTexture(GL_TEXTURE_2D, 0);
}
return true;
@@ -292,7 +375,7 @@ sc_display_update_texture(struct sc_display *display, const AVFrame *frame) {
enum sc_display_result
sc_display_render(struct sc_display *display, const SDL_Rect *geometry,
enum sc_orientation orientation) {
SDL_RenderClear(display->renderer);
sc_sdl_render_clear(display->renderer);
if (display->pending.flags) {
bool ok = sc_display_apply_pending(display);
@@ -305,8 +388,10 @@ sc_display_render(struct sc_display *display, const SDL_Rect *geometry,
SDL_Texture *texture = display->texture;
if (orientation == SC_ORIENTATION_0) {
int ret = SDL_RenderCopy(renderer, texture, NULL, geometry);
if (ret) {
SDL_FRect frect;
SDL_RectToFRect(geometry, &frect);
bool ok = SDL_RenderTexture(renderer, texture, NULL, &frect);
if (!ok) {
LOGE("Could not render texture: %s", SDL_GetError());
return SC_DISPLAY_RESULT_ERROR;
}
@@ -314,29 +399,27 @@ sc_display_render(struct sc_display *display, const SDL_Rect *geometry,
unsigned cw_rotation = sc_orientation_get_rotation(orientation);
double angle = 90 * cw_rotation;
const SDL_Rect *dstrect = NULL;
SDL_Rect rect;
SDL_FRect frect;
if (sc_orientation_is_swap(orientation)) {
rect.x = geometry->x + (geometry->w - geometry->h) / 2;
rect.y = geometry->y + (geometry->h - geometry->w) / 2;
rect.w = geometry->h;
rect.h = geometry->w;
dstrect = &rect;
frect.x = geometry->x + (geometry->w - geometry->h) / 2.f;
frect.y = geometry->y + (geometry->h - geometry->w) / 2.f;
frect.w = geometry->h;
frect.h = geometry->w;
} else {
dstrect = geometry;
SDL_RectToFRect(geometry, &frect);
}
SDL_RendererFlip flip = sc_orientation_is_mirror(orientation)
SDL_FlipMode flip = sc_orientation_is_mirror(orientation)
? SDL_FLIP_HORIZONTAL : 0;
int ret = SDL_RenderCopyEx(renderer, texture, NULL, dstrect, angle,
NULL, flip);
if (ret) {
bool ok = SDL_RenderTextureRotated(renderer, texture, NULL, &frect,
angle, NULL, flip);
if (!ok) {
LOGE("Could not render texture: %s", SDL_GetError());
return SC_DISPLAY_RESULT_ERROR;
}
}
SDL_RenderPresent(display->renderer);
sc_sdl_render_present(display->renderer);
return SC_DISPLAY_RESULT_OK;
}

View File

@@ -4,8 +4,9 @@
#include "common.h"
#include <stdbool.h>
#include <libavformat/avformat.h>
#include <SDL2/SDL.h>
#include <stdint.h>
#include <libavutil/frame.h>
#include <SDL3/SDL.h>
#include "coords.h"
#include "opengl.h"
@@ -21,20 +22,23 @@ struct sc_display {
struct sc_opengl gl;
#ifdef SC_DISPLAY_FORCE_OPENGL_CORE_PROFILE
SDL_GLContext *gl_context;
SDL_GLContext gl_context;
#endif
bool mipmaps;
uint32_t texture_id; // only set if mipmaps is enabled
struct {
#define SC_DISPLAY_PENDING_FLAG_SIZE 1
#define SC_DISPLAY_PENDING_FLAG_TEXTURE 1
#define SC_DISPLAY_PENDING_FLAG_FRAME 2
int8_t flags;
struct sc_size size;
struct {
struct sc_size size;
enum AVColorSpace color_space;
enum AVColorRange color_range;
} texture;
AVFrame *frame;
} pending;
bool has_frame;
};
enum sc_display_result {
@@ -51,7 +55,9 @@ void
sc_display_destroy(struct sc_display *display);
enum sc_display_result
sc_display_set_texture_size(struct sc_display *display, struct sc_size size);
sc_display_prepare_texture(struct sc_display *display, struct sc_size size,
enum AVColorSpace color_space,
enum AVColorRange color_range);
enum sc_display_result
sc_display_update_texture(struct sc_display *display, const AVFrame *frame);

View File

@@ -1,5 +1,7 @@
#include "events.h"
#include <assert.h>
#include "util/log.h"
#include "util/thread.h"
@@ -7,11 +9,8 @@ bool
sc_push_event_impl(uint32_t type, const char *name) {
SDL_Event event;
event.type = type;
int ret = SDL_PushEvent(&event);
// ret < 0: error (queue full)
// ret == 0: event was filtered
// ret == 1: success
if (ret != 1) {
bool ok = SDL_PushEvent(&event);
if (!ok) {
LOGE("Could not post %s event: %s", name, SDL_GetError());
return false;
}
@@ -28,34 +27,25 @@ sc_post_to_main_thread(sc_runnable_fn run, void *userdata) {
.data2 = userdata,
},
};
int ret = SDL_PushEvent(&event);
// ret < 0: error (queue full)
// ret == 0: event was filtered
// ret == 1: success
if (ret != 1) {
if (ret == 0) {
// if ret == 0, this is expected on exit, log in debug mode
LOGD("Could not post runnable to main thread (filtered)");
} else {
assert(ret < 0);
LOGW("Could not post runnable to main thread: %s", SDL_GetError());
}
bool ok = SDL_PushEvent(&event);
if (!ok) {
LOGW("Could not post runnable to main thread: %s", SDL_GetError());
return false;
}
return true;
}
static int SDLCALL
static bool SDLCALL
task_event_filter(void *userdata, SDL_Event *event) {
(void) userdata;
if (event->type == SC_EVENT_RUN_ON_MAIN_THREAD) {
// Reject this event type from now on
return 0;
return false;
}
return 1;
return true;
}
void

View File

@@ -5,10 +5,10 @@
#include <stdbool.h>
#include <stdint.h>
#include <SDL2/SDL_events.h>
#include <SDL3/SDL_events.h>
enum {
SC_EVENT_NEW_FRAME = SDL_USEREVENT,
SC_EVENT_NEW_FRAME = SDL_EVENT_USER,
SC_EVENT_RUN_ON_MAIN_THREAD,
SC_EVENT_DEVICE_DISCONNECTED,
SC_EVENT_SERVER_CONNECTION_FAILED,
@@ -16,7 +16,6 @@ enum {
SC_EVENT_USB_DEVICE_DISCONNECTED,
SC_EVENT_DEMUXER_ERROR,
SC_EVENT_RECORDER_ERROR,
SC_EVENT_SCREEN_INIT_SIZE,
SC_EVENT_TIME_LIMIT_REACHED,
SC_EVENT_CONTROLLER_ERROR,
SC_EVENT_AOA_OPEN_ERROR,

View File

@@ -1,11 +1,11 @@
#include "file_pusher.h"
#include <assert.h>
#include <stdlib.h>
#include <string.h>
#include "adb/adb.h"
#include "util/log.h"
#include "util/process_intr.h"
#define DEFAULT_PUSH_TARGET "/sdcard/Download/"

View File

@@ -1,6 +1,7 @@
#include "fps_counter.h"
#include <assert.h>
#include <stdint.h>
#include "util/log.h"

View File

@@ -5,9 +5,9 @@
#include <stdatomic.h>
#include <stdbool.h>
#include <stdint.h>
#include "util/thread.h"
#include "util/tick.h"
struct sc_fps_counter {
sc_thread thread;

View File

@@ -1,8 +1,6 @@
#include "frame_buffer.h"
#include <assert.h>
#include <libavutil/avutil.h>
#include <libavformat/avformat.h>
#include "util/log.h"

View File

@@ -4,6 +4,7 @@
#include "common.h"
#include <stdbool.h>
#include <libavutil/frame.h>
#include "util/thread.h"

View File

@@ -3,6 +3,7 @@
#include "common.h"
#include <stddef.h>
#include <stdint.h>
#define SC_HID_MAX_SIZE 15
@@ -15,7 +16,6 @@ struct sc_hid_input {
struct sc_hid_open {
uint16_t hid_id;
const char *name; // pointer to static memory
const uint8_t *report_desc; // pointer to static memory
size_t report_desc_size;
};

View File

@@ -2,6 +2,8 @@
#include <assert.h>
#include <inttypes.h>
#include <stddef.h>
#include <sys/types.h>
#include "util/binary.h"
#include "util/log.h"
@@ -52,10 +54,10 @@ static const uint8_t SC_HID_GAMEPAD_REPORT_DESC[] = {
0x09, 0x30,
// Usage (Y) Left stick y
0x09, 0x31,
// Usage (Z) Right stick x
0x09, 0x32,
// Usage (Rz) Right stick y
0x09, 0x35,
// Usage (Rx) Right stick x
0x09, 0x33,
// Usage (Ry) Right stick y
0x09, 0x34,
// Logical Minimum (0)
0x15, 0x00,
// Logical Maximum (65535)
@@ -65,15 +67,15 @@ static const uint8_t SC_HID_GAMEPAD_REPORT_DESC[] = {
0x75, 0x10,
// Report Count (4)
0x95, 0x04,
// Input (Data, Variable, Absolute): 4 bytes (X, Y, Z, Rz)
// Input (Data, Variable, Absolute): 4x2 bytes (X, Y, Z, Rz)
0x81, 0x02,
// Usage Page (Simulation Controls)
0x05, 0x02,
// Usage (Brake)
0x09, 0xC5,
// Usage (Accelerator)
0x09, 0xC4,
// Usage Page (Generic Desktop)
0x05, 0x01,
// Usage (Z)
0x09, 0x32,
// Usage (Rz)
0x09, 0x35,
// Logical Minimum (0)
0x15, 0x00,
// Logical Maximum (32767)
@@ -82,7 +84,7 @@ static const uint8_t SC_HID_GAMEPAD_REPORT_DESC[] = {
0x75, 0x10,
// Report Count (2)
0x95, 0x02,
// Input (Data, Variable, Absolute): 2 bytes (L2, R2)
// Input (Data, Variable, Absolute): 2x2 bytes (L2, R2)
0x81, 0x02,
// Usage Page (Buttons)
@@ -182,7 +184,7 @@ static const uint8_t SC_HID_GAMEPAD_REPORT_DESC[] = {
* `------------- SC_GAMEPAD_BUTTON_RIGHT_STICK
*
* +---------------+
* byte 14: |0 0 0 . . . . .| hat switch (dpad) position (0-8)
* byte 14: |0 0 0 0 . . . .| hat switch (dpad) position (0-8)
* +---------------+
* 9 possible positions and their values:
* 8 1 2
@@ -191,16 +193,19 @@ static const uint8_t SC_HID_GAMEPAD_REPORT_DESC[] = {
* (8 is top-left, 1 is top, 2 is top-right, etc.)
*/
// [-32768 to 32767] -> [0 to 65535]
#define AXIS_RESCALE(V) (uint16_t) (((int32_t) V) + 0x8000)
static void
sc_hid_gamepad_slot_init(struct sc_hid_gamepad_slot *slot,
uint32_t gamepad_id) {
assert(gamepad_id != SC_GAMEPAD_ID_INVALID);
slot->gamepad_id = gamepad_id;
slot->buttons = 0;
slot->axis_left_x = 0;
slot->axis_left_y = 0;
slot->axis_right_x = 0;
slot->axis_right_y = 0;
slot->axis_left_x = AXIS_RESCALE(0);
slot->axis_left_y = AXIS_RESCALE(0);
slot->axis_right_x = AXIS_RESCALE(0);
slot->axis_right_y = AXIS_RESCALE(0);
slot->axis_left_trigger = 0;
slot->axis_right_trigger = 0;
}
@@ -243,14 +248,8 @@ sc_hid_gamepad_generate_open(struct sc_hid_gamepad *hid,
sc_hid_gamepad_slot_init(&hid->slots[slot_idx], gamepad_id);
SDL_GameController* game_controller =
SDL_GameControllerFromInstanceID(gamepad_id);
assert(game_controller);
const char *name = SDL_GameControllerName(game_controller);
uint16_t hid_id = sc_hid_gamepad_slot_get_id(slot_idx);
hid_open->hid_id = hid_id;
hid_open->name = name;
hid_open->report_desc = SC_HID_GAMEPAD_REPORT_DESC;
hid_open->report_desc_size = sizeof(SC_HID_GAMEPAD_REPORT_DESC);
@@ -423,8 +422,6 @@ sc_hid_gamepad_generate_input_from_axis(struct sc_hid_gamepad *hid,
struct sc_hid_gamepad_slot *slot = &hid->slots[slot_idx];
// [-32768 to 32767] -> [0 to 65535]
#define AXIS_RESCALE(V) (uint16_t) (((int32_t) V) + 0x8000)
switch (event->axis) {
case SC_GAMEPAD_AXIS_LEFTX:
slot->axis_left_x = AXIS_RESCALE(event->value);

View File

@@ -4,6 +4,7 @@
#include "common.h"
#include <stdbool.h>
#include <stdint.h>
#include "hid/hid_event.h"
#include "input_events.h"

View File

@@ -1,5 +1,6 @@
#include "hid_keyboard.h"
#include <assert.h>
#include <string.h>
#include "util/log.h"
@@ -335,7 +336,6 @@ sc_hid_keyboard_generate_input_from_mods(struct sc_hid_input *hid_input,
void sc_hid_keyboard_generate_open(struct sc_hid_open *hid_open) {
hid_open->hid_id = SC_HID_ID_KEYBOARD;
hid_open->name = NULL; // No name specified after "scrcpy"
hid_open->report_desc = SC_HID_KEYBOARD_REPORT_DESC;
hid_open->report_desc_size = sizeof(SC_HID_KEYBOARD_REPORT_DESC);
}

View File

@@ -4,6 +4,7 @@
#include "common.h"
#include <stdbool.h>
#include <stdint.h>
#include "hid/hid_event.h"
#include "input_events.h"

View File

@@ -1,8 +1,10 @@
#include "hid_mouse.h"
#include <stdint.h>
// 1 byte for buttons + padding, 1 byte for X position, 1 byte for Y position,
// 1 byte for wheel motion
#define SC_HID_MOUSE_INPUT_SIZE 4
// 1 byte for wheel motion, 1 byte for hozizontal scrolling
#define SC_HID_MOUSE_INPUT_SIZE 5
/**
* Mouse descriptor from the specification:
@@ -73,6 +75,21 @@ static const uint8_t SC_HID_MOUSE_REPORT_DESC[] = {
// Input (Data, Variable, Relative): 3 position bytes (X, Y, Wheel)
0x81, 0x06,
// Usage Page (Consumer Page)
0x05, 0x0C,
// Usage(AC Pan)
0x0A, 0x38, 0x02,
// Logical Minimum (-127)
0x15, 0x81,
// Logical Maximum (127)
0x25, 0x7F,
// Report Size (8)
0x75, 0x08,
// Report Count (1)
0x95, 0x01,
// Input (Data, Variable, Relative): 1 byte (AC Pan)
0x81, 0x06,
// End Collection
0xC0,
@@ -149,6 +166,12 @@ sc_hid_buttons_from_buttons_state(uint8_t buttons_state) {
return c;
}
void
sc_hid_mouse_init(struct sc_hid_mouse *hid) {
hid->residual_hscroll = 0;
hid->residual_vscroll = 0;
}
void
sc_hid_mouse_generate_input_from_motion(struct sc_hid_input *hid_input,
const struct sc_mouse_motion_event *event) {
@@ -158,7 +181,8 @@ sc_hid_mouse_generate_input_from_motion(struct sc_hid_input *hid_input,
data[0] = sc_hid_buttons_from_buttons_state(event->buttons_state);
data[1] = CLAMP(event->xrel, -127, 127);
data[2] = CLAMP(event->yrel, -127, 127);
data[3] = 0; // wheel coordinates only used for scrolling
data[3] = 0; // no vertical scrolling
data[4] = 0; // no horizontal scrolling
}
void
@@ -170,27 +194,46 @@ sc_hid_mouse_generate_input_from_click(struct sc_hid_input *hid_input,
data[0] = sc_hid_buttons_from_buttons_state(event->buttons_state);
data[1] = 0; // no x motion
data[2] = 0; // no y motion
data[3] = 0; // wheel coordinates only used for scrolling
data[3] = 0; // no vertical scrolling
data[4] = 0; // no horizontal scrolling
}
void
sc_hid_mouse_generate_input_from_scroll(struct sc_hid_input *hid_input,
static int8_t
consume_scroll_integer(float *scroll) {
float value = CLAMP(*scroll, -127, 127);
int8_t consume = value; // truncate towards 0
float residual = value - consume;
*scroll = residual;
return consume;
}
bool
sc_hid_mouse_generate_input_from_scroll(struct sc_hid_mouse *hid,
struct sc_hid_input *hid_input,
const struct sc_mouse_scroll_event *event) {
sc_hid_mouse_input_init(hid_input);
hid->residual_hscroll += event->hscroll;
hid->residual_vscroll += event->vscroll;
int8_t hscroll = consume_scroll_integer(&hid->residual_hscroll);
int8_t vscroll = consume_scroll_integer(&hid->residual_vscroll);
if (!hscroll && !vscroll) {
// Not enough scrolling to inject a scroll event
return false;
}
uint8_t *data = hid_input->data;
data[0] = 0; // buttons state irrelevant (and unknown)
data[1] = 0; // no x motion
data[2] = 0; // no y motion
// In practice, vscroll is always -1, 0 or 1, but in theory other values
// are possible
data[3] = CLAMP(event->vscroll, -127, 127);
// Horizontal scrolling ignored
data[3] = vscroll;
data[4] = hscroll;
return true;
}
void sc_hid_mouse_generate_open(struct sc_hid_open *hid_open) {
hid_open->hid_id = SC_HID_ID_MOUSE;
hid_open->name = NULL; // No name specified after "scrcpy"
hid_open->report_desc = SC_HID_MOUSE_REPORT_DESC;
hid_open->report_desc_size = sizeof(SC_HID_MOUSE_REPORT_DESC);
}

View File

@@ -3,13 +3,18 @@
#include "common.h"
#include <stdbool.h>
#include "hid/hid_event.h"
#include "input_events.h"
#define SC_HID_ID_MOUSE 2
struct sc_hid_mouse {
float residual_hscroll;
float residual_vscroll;
};
void sc_hid_mouse_init(struct sc_hid_mouse *hid);
void
sc_hid_mouse_generate_open(struct sc_hid_open *hid_open);
@@ -24,8 +29,9 @@ void
sc_hid_mouse_generate_input_from_click(struct sc_hid_input *hid_input,
const struct sc_mouse_click_event *event);
void
sc_hid_mouse_generate_input_from_scroll(struct sc_hid_input *hid_input,
bool
sc_hid_mouse_generate_input_from_scroll(struct sc_hid_mouse *hid,
struct sc_hid_input *hid_input,
const struct sc_mouse_scroll_event *event);
#endif

View File

@@ -2,17 +2,22 @@
#include <assert.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <libavcodec/avcodec.h>
#include <libavformat/avformat.h>
#include <libavutil/avutil.h>
#include <libavutil/pixdesc.h>
#include <libavutil/pixfmt.h>
#include <SDL3/SDL.h>
#include "config.h"
#include "compat.h"
#include "util/env.h"
#include "util/file.h"
#ifdef PORTABLE
# include "util/file.h"
#endif
#include "util/log.h"
#include "util/str.h"
#define SCRCPY_PORTABLE_ICON_FILENAME "icon.png"
#define SCRCPY_DEFAULT_ICON_PATH \
@@ -151,13 +156,7 @@ free_ctx:
return result;
}
#if !SDL_VERSION_ATLEAST(2, 0, 10)
// SDL_PixelFormatEnum has been introduced in SDL 2.0.10. Use int for older SDL
// versions.
typedef int SDL_PixelFormatEnum;
#endif
static SDL_PixelFormatEnum
static SDL_PixelFormat
to_sdl_pixel_format(enum AVPixelFormat fmt) {
switch (fmt) {
case AV_PIX_FMT_RGB24: return SDL_PIXELFORMAT_RGB24;
@@ -167,13 +166,11 @@ to_sdl_pixel_format(enum AVPixelFormat fmt) {
case AV_PIX_FMT_ABGR: return SDL_PIXELFORMAT_ABGR32;
case AV_PIX_FMT_BGRA: return SDL_PIXELFORMAT_BGRA32;
case AV_PIX_FMT_RGB565BE: return SDL_PIXELFORMAT_RGB565;
case AV_PIX_FMT_RGB555BE: return SDL_PIXELFORMAT_RGB555;
case AV_PIX_FMT_RGB555BE: return SDL_PIXELFORMAT_XRGB1555;
case AV_PIX_FMT_BGR565BE: return SDL_PIXELFORMAT_BGR565;
case AV_PIX_FMT_BGR555BE: return SDL_PIXELFORMAT_BGR555;
case AV_PIX_FMT_RGB444BE: return SDL_PIXELFORMAT_RGB444;
#if SDL_VERSION_ATLEAST(2, 0, 12)
case AV_PIX_FMT_BGR444BE: return SDL_PIXELFORMAT_BGR444;
#endif
case AV_PIX_FMT_BGR555BE: return SDL_PIXELFORMAT_XBGR1555;
case AV_PIX_FMT_RGB444BE: return SDL_PIXELFORMAT_XRGB4444;
case AV_PIX_FMT_BGR444BE: return SDL_PIXELFORMAT_XBGR4444;
case AV_PIX_FMT_PAL8: return SDL_PIXELFORMAT_INDEX8;
default: return SDL_PIXELFORMAT_UNKNOWN;
}
@@ -198,20 +195,16 @@ load_from_path(const char *path) {
goto error;
}
SDL_PixelFormatEnum format = to_sdl_pixel_format(frame->format);
SDL_PixelFormat format = to_sdl_pixel_format(frame->format);
if (format == SDL_PIXELFORMAT_UNKNOWN) {
LOGE("Unsupported icon pixel format: %s (%d)", desc->name,
frame->format);
goto error;
}
int bits_per_pixel = av_get_bits_per_pixel(desc);
SDL_Surface *surface =
SDL_CreateRGBSurfaceWithFormatFrom(frame->data[0],
frame->width, frame->height,
bits_per_pixel,
frame->linesize[0],
format);
SDL_CreateSurfaceFrom(frame->width, frame->height, format,
frame->data[0], frame->linesize[0]);
if (!surface) {
LOGE("Could not create icon surface");
@@ -243,17 +236,35 @@ load_from_path(const char *path) {
#endif
}
SDL_Palette *palette = surface->format->palette;
assert(palette);
int ret = SDL_SetPaletteColors(palette, colors, 0, 256);
if (ret) {
SDL_Palette *palette = SDL_CreateSurfacePalette(surface);
if (!palette) {
LOGE("Could not create palette");
SDL_DestroySurface(surface);
goto error;
}
bool ok = SDL_SetPaletteColors(palette, colors, 0, 256);
if (!ok) {
LOGE("Could not set palette colors");
SDL_FreeSurface(surface);
SDL_DestroySurface(surface);
goto error;
}
}
surface->userdata = frame; // frame owns the data
SDL_PropertiesID props = SDL_GetSurfaceProperties(surface);
if (!props) {
LOGE("Could not get surface properties: %s", SDL_GetError());
SDL_DestroySurface(surface);
goto error;
}
// frame owns the data
bool ok = SDL_SetPointerProperty(props, "sc_frame", frame);
if (!ok) {
LOGE("Could not get surface properties: %s", SDL_GetError());
SDL_DestroySurface(surface);
goto error;
}
return surface;
@@ -276,8 +287,10 @@ scrcpy_icon_load(void) {
void
scrcpy_icon_destroy(SDL_Surface *icon) {
AVFrame *frame = icon->userdata;
SDL_PropertiesID props = SDL_GetSurfaceProperties(icon);
assert(props);
AVFrame *frame = SDL_GetPointerProperty(props, "sc_frame", NULL);
assert(frame);
av_frame_free(&frame);
SDL_FreeSurface(icon);
SDL_DestroySurface(icon);
}

View File

@@ -3,9 +3,7 @@
#include "common.h"
#include <stdbool.h>
#include <SDL2/SDL.h>
#include <libavformat/avformat.h>
#include <SDL3/SDL_surface.h>
SDL_Surface *
scrcpy_icon_load(void);

View File

@@ -6,10 +6,9 @@
#include <assert.h>
#include <stdbool.h>
#include <stdint.h>
#include <SDL2/SDL_events.h>
#include <SDL3/SDL_events.h>
#include "coords.h"
#include "options.h"
/* The representation of input events in scrcpy is very close to the SDL API,
* for simplicity.
@@ -44,17 +43,17 @@
*/
enum sc_mod {
SC_MOD_LSHIFT = KMOD_LSHIFT,
SC_MOD_RSHIFT = KMOD_RSHIFT,
SC_MOD_LCTRL = KMOD_LCTRL,
SC_MOD_RCTRL = KMOD_RCTRL,
SC_MOD_LALT = KMOD_LALT,
SC_MOD_RALT = KMOD_RALT,
SC_MOD_LGUI = KMOD_LGUI,
SC_MOD_RGUI = KMOD_RGUI,
SC_MOD_LSHIFT = SDL_KMOD_LSHIFT,
SC_MOD_RSHIFT = SDL_KMOD_RSHIFT,
SC_MOD_LCTRL = SDL_KMOD_LCTRL,
SC_MOD_RCTRL = SDL_KMOD_RCTRL,
SC_MOD_LALT = SDL_KMOD_LALT,
SC_MOD_RALT = SDL_KMOD_RALT,
SC_MOD_LGUI = SDL_KMOD_LGUI,
SC_MOD_RGUI = SDL_KMOD_RGUI,
SC_MOD_NUM = KMOD_NUM,
SC_MOD_CAPS = KMOD_CAPS,
SC_MOD_NUM = SDL_KMOD_NUM,
SC_MOD_CAPS = SDL_KMOD_CAPS,
};
enum sc_action {
@@ -71,12 +70,12 @@ enum sc_keycode {
SC_KEYCODE_TAB = SDLK_TAB,
SC_KEYCODE_SPACE = SDLK_SPACE,
SC_KEYCODE_EXCLAIM = SDLK_EXCLAIM,
SC_KEYCODE_QUOTEDBL = SDLK_QUOTEDBL,
SC_KEYCODE_QUOTEDBL = SDLK_DBLAPOSTROPHE,
SC_KEYCODE_HASH = SDLK_HASH,
SC_KEYCODE_PERCENT = SDLK_PERCENT,
SC_KEYCODE_DOLLAR = SDLK_DOLLAR,
SC_KEYCODE_AMPERSAND = SDLK_AMPERSAND,
SC_KEYCODE_QUOTE = SDLK_QUOTE,
SC_KEYCODE_QUOTE = SDLK_APOSTROPHE,
SC_KEYCODE_LEFTPAREN = SDLK_LEFTPAREN,
SC_KEYCODE_RIGHTPAREN = SDLK_RIGHTPAREN,
SC_KEYCODE_ASTERISK = SDLK_ASTERISK,
@@ -108,33 +107,33 @@ enum sc_keycode {
SC_KEYCODE_RIGHTBRACKET = SDLK_RIGHTBRACKET,
SC_KEYCODE_CARET = SDLK_CARET,
SC_KEYCODE_UNDERSCORE = SDLK_UNDERSCORE,
SC_KEYCODE_BACKQUOTE = SDLK_BACKQUOTE,
SC_KEYCODE_a = SDLK_a,
SC_KEYCODE_b = SDLK_b,
SC_KEYCODE_c = SDLK_c,
SC_KEYCODE_d = SDLK_d,
SC_KEYCODE_e = SDLK_e,
SC_KEYCODE_f = SDLK_f,
SC_KEYCODE_g = SDLK_g,
SC_KEYCODE_h = SDLK_h,
SC_KEYCODE_i = SDLK_i,
SC_KEYCODE_j = SDLK_j,
SC_KEYCODE_k = SDLK_k,
SC_KEYCODE_l = SDLK_l,
SC_KEYCODE_m = SDLK_m,
SC_KEYCODE_n = SDLK_n,
SC_KEYCODE_o = SDLK_o,
SC_KEYCODE_p = SDLK_p,
SC_KEYCODE_q = SDLK_q,
SC_KEYCODE_r = SDLK_r,
SC_KEYCODE_s = SDLK_s,
SC_KEYCODE_t = SDLK_t,
SC_KEYCODE_u = SDLK_u,
SC_KEYCODE_v = SDLK_v,
SC_KEYCODE_w = SDLK_w,
SC_KEYCODE_x = SDLK_x,
SC_KEYCODE_y = SDLK_y,
SC_KEYCODE_z = SDLK_z,
SC_KEYCODE_BACKQUOTE = SDLK_GRAVE,
SC_KEYCODE_a = SDLK_A,
SC_KEYCODE_b = SDLK_B,
SC_KEYCODE_c = SDLK_C,
SC_KEYCODE_d = SDLK_D,
SC_KEYCODE_e = SDLK_E,
SC_KEYCODE_f = SDLK_F,
SC_KEYCODE_g = SDLK_G,
SC_KEYCODE_h = SDLK_H,
SC_KEYCODE_i = SDLK_I,
SC_KEYCODE_j = SDLK_J,
SC_KEYCODE_k = SDLK_K,
SC_KEYCODE_l = SDLK_L,
SC_KEYCODE_m = SDLK_M,
SC_KEYCODE_n = SDLK_N,
SC_KEYCODE_o = SDLK_O,
SC_KEYCODE_p = SDLK_P,
SC_KEYCODE_q = SDLK_Q,
SC_KEYCODE_r = SDLK_R,
SC_KEYCODE_s = SDLK_S,
SC_KEYCODE_t = SDLK_T,
SC_KEYCODE_u = SDLK_U,
SC_KEYCODE_v = SDLK_V,
SC_KEYCODE_w = SDLK_W,
SC_KEYCODE_x = SDLK_X,
SC_KEYCODE_y = SDLK_Y,
SC_KEYCODE_z = SDLK_Z,
SC_KEYCODE_CAPSLOCK = SDLK_CAPSLOCK,
@@ -316,11 +315,11 @@ enum sc_scancode {
// to avoid unnecessary conversions (and confusion).
enum sc_mouse_button {
SC_MOUSE_BUTTON_UNKNOWN = 0,
SC_MOUSE_BUTTON_LEFT = SDL_BUTTON(SDL_BUTTON_LEFT),
SC_MOUSE_BUTTON_RIGHT = SDL_BUTTON(SDL_BUTTON_RIGHT),
SC_MOUSE_BUTTON_MIDDLE = SDL_BUTTON(SDL_BUTTON_MIDDLE),
SC_MOUSE_BUTTON_X1 = SDL_BUTTON(SDL_BUTTON_X1),
SC_MOUSE_BUTTON_X2 = SDL_BUTTON(SDL_BUTTON_X2),
SC_MOUSE_BUTTON_LEFT = SDL_BUTTON_MASK(SDL_BUTTON_LEFT),
SC_MOUSE_BUTTON_RIGHT = SDL_BUTTON_MASK(SDL_BUTTON_RIGHT),
SC_MOUSE_BUTTON_MIDDLE = SDL_BUTTON_MASK(SDL_BUTTON_MIDDLE),
SC_MOUSE_BUTTON_X1 = SDL_BUTTON_MASK(SDL_BUTTON_X1),
SC_MOUSE_BUTTON_X2 = SDL_BUTTON_MASK(SDL_BUTTON_X2),
};
// Use the naming from SDL3 for gamepad axis and buttons:
@@ -328,31 +327,31 @@ enum sc_mouse_button {
enum sc_gamepad_axis {
SC_GAMEPAD_AXIS_UNKNOWN = -1,
SC_GAMEPAD_AXIS_LEFTX = SDL_CONTROLLER_AXIS_LEFTX,
SC_GAMEPAD_AXIS_LEFTY = SDL_CONTROLLER_AXIS_LEFTY,
SC_GAMEPAD_AXIS_RIGHTX = SDL_CONTROLLER_AXIS_RIGHTX,
SC_GAMEPAD_AXIS_RIGHTY = SDL_CONTROLLER_AXIS_RIGHTY,
SC_GAMEPAD_AXIS_LEFT_TRIGGER = SDL_CONTROLLER_AXIS_TRIGGERLEFT,
SC_GAMEPAD_AXIS_RIGHT_TRIGGER = SDL_CONTROLLER_AXIS_TRIGGERRIGHT,
SC_GAMEPAD_AXIS_LEFTX = SDL_GAMEPAD_AXIS_LEFTX,
SC_GAMEPAD_AXIS_LEFTY = SDL_GAMEPAD_AXIS_LEFTY,
SC_GAMEPAD_AXIS_RIGHTX = SDL_GAMEPAD_AXIS_RIGHTX,
SC_GAMEPAD_AXIS_RIGHTY = SDL_GAMEPAD_AXIS_RIGHTY,
SC_GAMEPAD_AXIS_LEFT_TRIGGER = SDL_GAMEPAD_AXIS_LEFT_TRIGGER,
SC_GAMEPAD_AXIS_RIGHT_TRIGGER = SDL_GAMEPAD_AXIS_RIGHT_TRIGGER,
};
enum sc_gamepad_button {
SC_GAMEPAD_BUTTON_UNKNOWN = -1,
SC_GAMEPAD_BUTTON_SOUTH = SDL_CONTROLLER_BUTTON_A,
SC_GAMEPAD_BUTTON_EAST = SDL_CONTROLLER_BUTTON_B,
SC_GAMEPAD_BUTTON_WEST = SDL_CONTROLLER_BUTTON_X,
SC_GAMEPAD_BUTTON_NORTH = SDL_CONTROLLER_BUTTON_Y,
SC_GAMEPAD_BUTTON_BACK = SDL_CONTROLLER_BUTTON_BACK,
SC_GAMEPAD_BUTTON_GUIDE = SDL_CONTROLLER_BUTTON_GUIDE,
SC_GAMEPAD_BUTTON_START = SDL_CONTROLLER_BUTTON_START,
SC_GAMEPAD_BUTTON_LEFT_STICK = SDL_CONTROLLER_BUTTON_LEFTSTICK,
SC_GAMEPAD_BUTTON_RIGHT_STICK = SDL_CONTROLLER_BUTTON_RIGHTSTICK,
SC_GAMEPAD_BUTTON_LEFT_SHOULDER = SDL_CONTROLLER_BUTTON_LEFTSHOULDER,
SC_GAMEPAD_BUTTON_RIGHT_SHOULDER = SDL_CONTROLLER_BUTTON_RIGHTSHOULDER,
SC_GAMEPAD_BUTTON_DPAD_UP = SDL_CONTROLLER_BUTTON_DPAD_UP,
SC_GAMEPAD_BUTTON_DPAD_DOWN = SDL_CONTROLLER_BUTTON_DPAD_DOWN,
SC_GAMEPAD_BUTTON_DPAD_LEFT = SDL_CONTROLLER_BUTTON_DPAD_LEFT,
SC_GAMEPAD_BUTTON_DPAD_RIGHT = SDL_CONTROLLER_BUTTON_DPAD_RIGHT,
SC_GAMEPAD_BUTTON_SOUTH = SDL_GAMEPAD_BUTTON_SOUTH,
SC_GAMEPAD_BUTTON_EAST = SDL_GAMEPAD_BUTTON_EAST,
SC_GAMEPAD_BUTTON_WEST = SDL_GAMEPAD_BUTTON_WEST,
SC_GAMEPAD_BUTTON_NORTH = SDL_GAMEPAD_BUTTON_NORTH,
SC_GAMEPAD_BUTTON_BACK = SDL_GAMEPAD_BUTTON_BACK,
SC_GAMEPAD_BUTTON_GUIDE = SDL_GAMEPAD_BUTTON_GUIDE,
SC_GAMEPAD_BUTTON_START = SDL_GAMEPAD_BUTTON_START,
SC_GAMEPAD_BUTTON_LEFT_STICK = SDL_GAMEPAD_BUTTON_LEFT_STICK,
SC_GAMEPAD_BUTTON_RIGHT_STICK = SDL_GAMEPAD_BUTTON_RIGHT_STICK,
SC_GAMEPAD_BUTTON_LEFT_SHOULDER = SDL_GAMEPAD_BUTTON_LEFT_SHOULDER,
SC_GAMEPAD_BUTTON_RIGHT_SHOULDER = SDL_GAMEPAD_BUTTON_RIGHT_SHOULDER,
SC_GAMEPAD_BUTTON_DPAD_UP = SDL_GAMEPAD_BUTTON_DPAD_UP,
SC_GAMEPAD_BUTTON_DPAD_DOWN = SDL_GAMEPAD_BUTTON_DPAD_DOWN,
SC_GAMEPAD_BUTTON_DPAD_LEFT = SDL_GAMEPAD_BUTTON_DPAD_LEFT,
SC_GAMEPAD_BUTTON_DPAD_RIGHT = SDL_GAMEPAD_BUTTON_DPAD_RIGHT,
};
static_assert(sizeof(enum sc_mod) >= sizeof(SDL_Keymod),
@@ -412,18 +411,12 @@ struct sc_touch_event {
float pressure;
};
enum sc_gamepad_device_event_type {
SC_GAMEPAD_DEVICE_ADDED,
SC_GAMEPAD_DEVICE_REMOVED,
};
// As documented in <https://wiki.libsdl.org/SDL2/SDL_JoystickID>:
// The ID value starts at 0 and increments from there. The value -1 is an
// invalid ID.
#define SC_GAMEPAD_ID_INVALID UINT32_C(-1)
struct sc_gamepad_device_event {
enum sc_gamepad_device_event_type type;
uint32_t gamepad_id;
};
@@ -456,8 +449,8 @@ sc_scancode_from_sdl(SDL_Scancode scancode) {
static inline enum sc_action
sc_action_from_sdl_keyboard_type(uint32_t type) {
assert(type == SDL_KEYDOWN || type == SDL_KEYUP);
if (type == SDL_KEYDOWN) {
assert(type == SDL_EVENT_KEY_DOWN || type == SDL_EVENT_KEY_UP);
if (type == SDL_EVENT_KEY_DOWN) {
return SC_ACTION_DOWN;
}
return SC_ACTION_UP;
@@ -465,8 +458,8 @@ sc_action_from_sdl_keyboard_type(uint32_t type) {
static inline enum sc_action
sc_action_from_sdl_mousebutton_type(uint32_t type) {
assert(type == SDL_MOUSEBUTTONDOWN || type == SDL_MOUSEBUTTONUP);
if (type == SDL_MOUSEBUTTONDOWN) {
assert(type == SDL_EVENT_MOUSE_BUTTON_DOWN || type == SDL_EVENT_MOUSE_BUTTON_UP);
if (type == SDL_EVENT_MOUSE_BUTTON_DOWN) {
return SC_ACTION_DOWN;
}
return SC_ACTION_UP;
@@ -474,12 +467,12 @@ sc_action_from_sdl_mousebutton_type(uint32_t type) {
static inline enum sc_touch_action
sc_touch_action_from_sdl(uint32_t type) {
assert(type == SDL_FINGERMOTION || type == SDL_FINGERDOWN ||
type == SDL_FINGERUP);
if (type == SDL_FINGERMOTION) {
assert(type == SDL_EVENT_FINGER_MOTION || type == SDL_EVENT_FINGER_DOWN ||
type == SDL_EVENT_FINGER_UP);
if (type == SDL_EVENT_FINGER_MOTION) {
return SC_TOUCH_ACTION_MOVE;
}
if (type == SDL_FINGERDOWN) {
if (type == SDL_EVENT_FINGER_DOWN) {
return SC_TOUCH_ACTION_DOWN;
}
return SC_TOUCH_ACTION_UP;
@@ -489,7 +482,7 @@ static inline enum sc_mouse_button
sc_mouse_button_from_sdl(uint8_t button) {
if (button >= SDL_BUTTON_LEFT && button <= SDL_BUTTON_X2) {
// SC_MOUSE_BUTTON_* constants are initialized from SDL_BUTTON(index)
return SDL_BUTTON(button);
return SDL_BUTTON_MASK(button);
}
return SC_MOUSE_BUTTON_UNKNOWN;
@@ -503,19 +496,9 @@ sc_mouse_buttons_state_from_sdl(uint32_t buttons_state) {
return buttons_state;
}
static inline enum sc_gamepad_device_event_type
sc_gamepad_device_event_type_from_sdl_type(uint32_t type) {
assert(type == SDL_CONTROLLERDEVICEADDED
|| type == SDL_CONTROLLERDEVICEREMOVED);
if (type == SDL_CONTROLLERDEVICEADDED) {
return SC_GAMEPAD_DEVICE_ADDED;
}
return SC_GAMEPAD_DEVICE_REMOVED;
}
static inline enum sc_gamepad_axis
sc_gamepad_axis_from_sdl(uint8_t axis) {
if (axis <= SDL_CONTROLLER_AXIS_TRIGGERRIGHT) {
if (axis <= SDL_GAMEPAD_AXIS_RIGHT_TRIGGER) {
// SC_GAMEPAD_AXIS_* constants are initialized from
// SDL_CONTROLLER_AXIS_*
return axis;
@@ -525,7 +508,7 @@ sc_gamepad_axis_from_sdl(uint8_t axis) {
static inline enum sc_gamepad_button
sc_gamepad_button_from_sdl(uint8_t button) {
if (button <= SDL_CONTROLLER_BUTTON_DPAD_RIGHT) {
if (button <= SDL_GAMEPAD_BUTTON_DPAD_RIGHT) {
// SC_GAMEPAD_BUTTON_* constants are initialized from
// SDL_CONTROLLER_BUTTON_*
return button;
@@ -535,8 +518,8 @@ sc_gamepad_button_from_sdl(uint8_t button) {
static inline enum sc_action
sc_action_from_sdl_controllerbutton_type(uint32_t type) {
assert(type == SDL_CONTROLLERBUTTONDOWN || type == SDL_CONTROLLERBUTTONUP);
if (type == SDL_CONTROLLERBUTTONDOWN) {
assert(type == SDL_EVENT_GAMEPAD_BUTTON_DOWN || type == SDL_EVENT_GAMEPAD_BUTTON_UP);
if (type == SDL_EVENT_GAMEPAD_BUTTON_DOWN) {
return SC_ACTION_DOWN;
}
return SC_ACTION_UP;

View File

@@ -1,12 +1,17 @@
#include "input_manager.h"
#include <assert.h>
#include <SDL2/SDL_keycode.h>
#include <stdlib.h>
#include <string.h>
#include <SDL3/SDL.h>
#include "android/input.h"
#include "android/keycodes.h"
#include "input_events.h"
#include "screen.h"
#include "shortcut_mod.h"
#include "util/log.h"
#include "util/sdl.h"
void
sc_input_manager_init(struct sc_input_manager *im,
@@ -24,6 +29,7 @@ sc_input_manager_init(struct sc_input_manager *im,
im->kp = params->kp;
im->mp = params->mp;
im->gp = params->gp;
im->camera = params->camera;
im->mouse_bindings = params->mouse_bindings;
im->legacy_paste = params->legacy_paste;
@@ -47,7 +53,7 @@ sc_input_manager_init(struct sc_input_manager *im,
static void
send_keycode(struct sc_input_manager *im, enum android_keycode keycode,
enum sc_action action, const char *name) {
assert(im->controller && im->kp);
assert(im->controller && im->kp && !im->camera);
// send DOWN event
struct sc_control_msg msg;
@@ -104,7 +110,7 @@ action_menu(struct sc_input_manager *im, enum sc_action action) {
static void
press_back_or_turn_screen_on(struct sc_input_manager *im,
enum sc_action action) {
assert(im->controller && im->kp);
assert(im->controller && im->kp && !im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_BACK_OR_SCREEN_ON;
@@ -119,7 +125,7 @@ press_back_or_turn_screen_on(struct sc_input_manager *im,
static void
expand_notification_panel(struct sc_input_manager *im) {
assert(im->controller);
assert(im->controller && !im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_EXPAND_NOTIFICATION_PANEL;
@@ -131,7 +137,7 @@ expand_notification_panel(struct sc_input_manager *im) {
static void
expand_settings_panel(struct sc_input_manager *im) {
assert(im->controller);
assert(im->controller && !im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_EXPAND_SETTINGS_PANEL;
@@ -143,7 +149,7 @@ expand_settings_panel(struct sc_input_manager *im) {
static void
collapse_panels(struct sc_input_manager *im) {
assert(im->controller);
assert(im->controller && !im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_COLLAPSE_PANELS;
@@ -155,7 +161,7 @@ collapse_panels(struct sc_input_manager *im) {
static bool
get_device_clipboard(struct sc_input_manager *im, enum sc_copy_key copy_key) {
assert(im->controller && im->kp);
assert(im->controller && im->kp && !im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_GET_CLIPBOARD;
@@ -172,7 +178,7 @@ get_device_clipboard(struct sc_input_manager *im, enum sc_copy_key copy_key) {
static bool
set_device_clipboard(struct sc_input_manager *im, bool paste,
uint64_t sequence) {
assert(im->controller && im->kp);
assert(im->controller && im->kp && !im->camera);
char *text = SDL_GetClipboardText();
if (!text) {
@@ -204,7 +210,7 @@ set_device_clipboard(struct sc_input_manager *im, bool paste,
static void
set_display_power(struct sc_input_manager *im, bool on) {
assert(im->controller);
assert(im->controller && !im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_SET_DISPLAY_POWER;
@@ -231,7 +237,7 @@ switch_fps_counter_state(struct sc_input_manager *im) {
static void
clipboard_paste(struct sc_input_manager *im) {
assert(im->controller && im->kp);
assert(im->controller && im->kp && !im->camera);
char *text = SDL_GetClipboardText();
if (!text) {
@@ -262,7 +268,7 @@ clipboard_paste(struct sc_input_manager *im) {
static void
rotate_device(struct sc_input_manager *im) {
assert(im->controller);
assert(im->controller && !im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_ROTATE_DEVICE;
@@ -274,7 +280,7 @@ rotate_device(struct sc_input_manager *im) {
static void
open_hard_keyboard_settings(struct sc_input_manager *im) {
assert(im->controller);
assert(im->controller && !im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_OPEN_HARD_KEYBOARD_SETTINGS;
@@ -296,6 +302,19 @@ reset_video(struct sc_input_manager *im) {
}
}
static void
camera_set_torch(struct sc_input_manager *im, bool on) {
assert(im->controller && im->camera);
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_CAMERA_SET_TORCH;
msg.camera_set_torch.on = on;
if (!sc_controller_push_msg(im->controller, &msg)) {
LOGW("Could not request setting camera torch");
}
}
static void
apply_orientation_transform(struct sc_input_manager *im,
enum sc_orientation transform) {
@@ -308,6 +327,10 @@ apply_orientation_transform(struct sc_input_manager *im,
static void
sc_input_manager_process_text_input(struct sc_input_manager *im,
const SDL_TextInputEvent *event) {
if (im->camera || !im->kp || im->screen->paused) {
return;
}
if (!im->kp->ops->process_text) {
// The key processor does not support text input
return;
@@ -365,16 +388,19 @@ inverse_point(struct sc_point point, struct sc_size size,
static void
sc_input_manager_process_key(struct sc_input_manager *im,
const SDL_KeyboardEvent *event) {
// some key events do not interact with the device, so process the event
// even if control is disabled
// controller is NULL if --no-control is requested
bool control = im->controller;
bool paused = im->screen->paused;
bool video = im->screen->video;
SDL_Keycode sdl_keycode = event->keysym.sym;
uint16_t mod = event->keysym.mod;
bool down = event->type == SDL_KEYDOWN;
bool ctrl = event->keysym.mod & KMOD_CTRL;
bool shift = event->keysym.mod & KMOD_SHIFT;
SDL_Keycode sdl_keycode = event->key;
uint16_t mod = event->mod;
bool down = event->type == SDL_EVENT_KEY_DOWN;
bool ctrl = event->mod & SDL_KMOD_CTRL;
bool shift = event->mod & SDL_KMOD_SHIFT;
bool repeat = event->repeat;
// Either the modifier includes a shortcut modifier, or the key
@@ -398,156 +424,175 @@ sc_input_manager_process_key(struct sc_input_manager *im,
if (is_shortcut) {
enum sc_action action = down ? SC_ACTION_DOWN : SC_ACTION_UP;
switch (sdl_keycode) {
case SDLK_h:
if (im->kp && !shift && !repeat && !paused) {
action_home(im, action);
}
return;
case SDLK_b: // fall-through
case SDLK_BACKSPACE:
if (im->kp && !shift && !repeat && !paused) {
action_back(im, action);
}
return;
case SDLK_s:
if (im->kp && !shift && !repeat && !paused) {
action_app_switch(im, action);
}
return;
case SDLK_m:
if (im->kp && !shift && !repeat && !paused) {
action_menu(im, action);
}
return;
case SDLK_p:
if (im->kp && !shift && !repeat && !paused) {
action_power(im, action);
}
return;
case SDLK_o:
if (control && !repeat && down && !paused) {
bool on = shift;
set_display_power(im, on);
}
return;
case SDLK_z:
case SDLK_Z:
if (video && down && !repeat) {
sc_screen_set_paused(im->screen, !shift);
}
return;
case SDLK_DOWN:
if (shift) {
if (video && !repeat && down) {
apply_orientation_transform(im,
SC_ORIENTATION_FLIP_180);
}
} else if (im->kp && !paused) {
// forward repeated events
action_volume_down(im, action);
if (video && shift && !repeat && down) {
apply_orientation_transform(im, SC_ORIENTATION_FLIP_180);
}
return;
case SDLK_UP:
if (shift) {
if (video && !repeat && down) {
apply_orientation_transform(im,
SC_ORIENTATION_FLIP_180);
}
} else if (im->kp && !paused) {
// forward repeated events
action_volume_up(im, action);
if (video && shift && !repeat && down) {
apply_orientation_transform(im, SC_ORIENTATION_FLIP_180);
}
return;
case SDLK_LEFT:
if (video && !repeat && down) {
if (shift) {
apply_orientation_transform(im,
SC_ORIENTATION_FLIP_0);
apply_orientation_transform(im, SC_ORIENTATION_FLIP_0);
} else {
apply_orientation_transform(im,
SC_ORIENTATION_270);
apply_orientation_transform(im, SC_ORIENTATION_270);
}
}
return;
case SDLK_RIGHT:
if (video && !repeat && down) {
if (shift) {
apply_orientation_transform(im,
SC_ORIENTATION_FLIP_0);
apply_orientation_transform(im, SC_ORIENTATION_FLIP_0);
} else {
apply_orientation_transform(im,
SC_ORIENTATION_90);
apply_orientation_transform(im, SC_ORIENTATION_90);
}
}
return;
case SDLK_c:
if (im->kp && !shift && !repeat && down && !paused) {
get_device_clipboard(im, SC_COPY_KEY_COPY);
}
return;
case SDLK_x:
if (im->kp && !shift && !repeat && down && !paused) {
get_device_clipboard(im, SC_COPY_KEY_CUT);
}
return;
case SDLK_v:
if (im->kp && !repeat && down && !paused) {
if (shift || im->legacy_paste) {
// inject the text as input events
clipboard_paste(im);
} else {
// store the text in the device clipboard and paste,
// without requesting an acknowledgment
set_device_clipboard(im, true, SC_SEQUENCE_INVALID);
}
}
return;
case SDLK_f:
case SDLK_F:
if (video && !shift && !repeat && down) {
sc_screen_toggle_fullscreen(im->screen);
}
return;
case SDLK_w:
case SDLK_W:
if (video && !shift && !repeat && down) {
sc_screen_resize_to_fit(im->screen);
}
return;
case SDLK_g:
case SDLK_G:
if (video && !shift && !repeat && down) {
sc_screen_resize_to_pixel_perfect(im->screen);
}
return;
case SDLK_i:
case SDLK_I:
if (video && !shift && !repeat && down) {
switch_fps_counter_state(im);
}
return;
case SDLK_n:
if (control && !repeat && down && !paused) {
if (shift) {
collapse_panels(im);
} else if (im->key_repeat == 0) {
expand_notification_panel(im);
} else {
expand_settings_panel(im);
}
}
return;
case SDLK_r:
if (control && !repeat && down && !paused) {
if (shift) {
}
// Flatten conditions to avoid additional indentation levels
if (control) {
// Controls for all sources
switch (sdl_keycode) {
case SDLK_R:
if (!repeat && shift && down && !paused) {
reset_video(im);
} else {
}
return;
}
}
if (control && !im->camera) {
switch (sdl_keycode) {
case SDLK_H:
if (im->kp && !shift && !repeat && !paused) {
action_home(im, action);
}
return;
case SDLK_B: // fall-through
case SDLK_BACKSPACE:
if (im->kp && !shift && !repeat && !paused) {
action_back(im, action);
}
return;
case SDLK_S:
if (im->kp && !shift && !repeat && !paused) {
action_app_switch(im, action);
}
return;
case SDLK_M:
if (im->kp && !shift && !repeat && !paused) {
action_menu(im, action);
}
return;
case SDLK_P:
if (im->kp && !shift && !repeat && !paused) {
action_power(im, action);
}
return;
case SDLK_O:
if (control && !repeat && down && !paused) {
bool on = shift;
set_display_power(im, on);
}
return;
case SDLK_DOWN:
if (im->kp && !shift && !paused) {
// forward repeated events
action_volume_down(im, action);
}
return;
case SDLK_UP:
if (im->kp && !shift && !paused) {
// forward repeated events
action_volume_up(im, action);
}
return;
case SDLK_C:
if (im->kp && !shift && !repeat && down && !paused) {
get_device_clipboard(im, SC_COPY_KEY_COPY);
}
return;
case SDLK_X:
if (im->kp && !shift && !repeat && down && !paused) {
get_device_clipboard(im, SC_COPY_KEY_CUT);
}
return;
case SDLK_V:
if (im->kp && !repeat && down && !paused) {
if (shift || im->legacy_paste) {
// inject the text as input events
clipboard_paste(im);
} else {
// store the text in the device clipboard and paste,
// without requesting an acknowledgment
set_device_clipboard(im, true, SC_SEQUENCE_INVALID);
}
}
return;
case SDLK_N:
if (!repeat && down && !paused) {
if (shift) {
collapse_panels(im);
} else if (im->key_repeat == 0) {
expand_notification_panel(im);
} else {
expand_settings_panel(im);
}
}
return;
case SDLK_R:
if (!repeat && !shift && down && !paused) {
rotate_device(im);
}
}
return;
case SDLK_k:
if (control && !shift && !repeat && down && !paused
&& im->kp && im->kp->hid) {
// Only if the current keyboard is hid
open_hard_keyboard_settings(im);
}
return;
return;
case SDLK_K:
if (!shift && !repeat && down && !paused
&& im->kp && im->kp->hid) {
// Only if the current keyboard is hid
open_hard_keyboard_settings(im);
}
return;
}
}
if (control && im->camera) {
switch (sdl_keycode) {
case SDLK_L:
if (!repeat && down) {
camera_set_torch(im, !shift);
}
return;
}
}
return;
@@ -557,8 +602,10 @@ sc_input_manager_process_key(struct sc_input_manager *im,
return;
}
assert(!im->camera);
uint64_t ack_to_wait = SC_SEQUENCE_INVALID;
bool is_ctrl_v = ctrl && !shift && sdl_keycode == SDLK_v && down && !repeat;
bool is_ctrl_v = ctrl && !shift && sdl_keycode == SDLK_V && down && !repeat;
if (im->clipboard_autosync && is_ctrl_v) {
if (im->legacy_paste) {
// inject the text as input events
@@ -591,7 +638,7 @@ sc_input_manager_process_key(struct sc_input_manager *im,
return;
}
enum sc_scancode scancode = sc_scancode_from_sdl(event->keysym.scancode);
enum sc_scancode scancode = sc_scancode_from_sdl(event->scancode);
if (scancode == SC_SCANCODE_UNKNOWN) {
return;
}
@@ -601,7 +648,7 @@ sc_input_manager_process_key(struct sc_input_manager *im,
.keycode = keycode,
.scancode = scancode,
.repeat = event->repeat,
.mods_state = sc_mods_state_from_sdl(event->keysym.mod),
.mods_state = sc_mods_state_from_sdl(event->mod),
};
assert(im->kp->ops->process_key);
@@ -628,6 +675,10 @@ sc_input_manager_get_position(struct sc_input_manager *im, int32_t x,
static void
sc_input_manager_process_mouse_motion(struct sc_input_manager *im,
const SDL_MouseMotionEvent *event) {
if (im->camera || !im->mp || im->screen->paused) {
return;
}
if (event->which == SDL_TOUCH_MOUSEID) {
// simulated from touch events, so it's a duplicate
return;
@@ -663,18 +714,21 @@ sc_input_manager_process_mouse_motion(struct sc_input_manager *im,
static void
sc_input_manager_process_touch(struct sc_input_manager *im,
const SDL_TouchFingerEvent *event) {
if (im->camera || !im->mp || im->screen->paused) {
return;
}
if (!im->mp->ops->process_touch) {
// The mouse processor does not support touch events
return;
}
int dw;
int dh;
SDL_GL_GetDrawableSize(im->screen->window, &dw, &dh);
struct sc_size drawable_size =
sc_sdl_get_window_size_in_pixels(im->screen->window);
// SDL touch event coordinates are normalized in the range [0; 1]
int32_t x = event->x * dw;
int32_t y = event->y * dh;
int32_t x = event->x * (int32_t) drawable_size.width;
int32_t y = event->y * (int32_t) drawable_size.height;
struct sc_touch_event evt = {
.position = {
@@ -683,7 +737,7 @@ sc_input_manager_process_touch(struct sc_input_manager *im,
sc_screen_convert_drawable_to_frame_coords(im->screen, x, y),
},
.action = sc_touch_action_from_sdl(event->type),
.pointer_id = event->fingerId,
.pointer_id = event->fingerID,
.pressure = event->pressure,
};
@@ -712,6 +766,13 @@ sc_input_manager_get_binding(const struct sc_mouse_binding_set *bindings,
static void
sc_input_manager_process_mouse_button(struct sc_input_manager *im,
const SDL_MouseButtonEvent *event) {
// some mouse events do not interact with the device, so process the event
// even if control is disabled
if (im->camera) {
return;
}
if (event->which == SDL_TOUCH_MOUSEID) {
// simulated from touch events, so it's a duplicate
return;
@@ -719,7 +780,7 @@ sc_input_manager_process_mouse_button(struct sc_input_manager *im,
bool control = im->controller;
bool paused = im->screen->paused;
bool down = event->type == SDL_MOUSEBUTTONDOWN;
bool down = event->type == SDL_EVENT_MOUSE_BUTTON_DOWN;
enum sc_mouse_button button = sc_mouse_button_from_sdl(event->button);
if (button == SC_MOUSE_BUTTON_UNKNOWN) {
@@ -732,8 +793,8 @@ sc_input_manager_process_mouse_button(struct sc_input_manager *im,
}
SDL_Keymod keymod = SDL_GetModState();
bool ctrl_pressed = keymod & KMOD_CTRL;
bool shift_pressed = keymod & KMOD_SHIFT;
bool ctrl_pressed = keymod & SDL_KMOD_CTRL;
bool shift_pressed = keymod & SDL_KMOD_SHIFT;
if (control && !paused) {
enum sc_action action = down ? SC_ACTION_DOWN : SC_ACTION_UP;
@@ -879,26 +940,25 @@ sc_input_manager_process_mouse_button(struct sc_input_manager *im,
static void
sc_input_manager_process_mouse_wheel(struct sc_input_manager *im,
const SDL_MouseWheelEvent *event) {
if (im->camera || !im->kp || im->screen->paused) {
return;
}
if (!im->mp->ops->process_mouse_scroll) {
// The mouse processor does not support scroll events
return;
}
// mouse_x and mouse_y are expressed in pixels relative to the window
int mouse_x;
int mouse_y;
float mouse_x;
float mouse_y;
uint32_t buttons = SDL_GetMouseState(&mouse_x, &mouse_y);
(void) buttons; // Actual buttons are tracked manually to ignore shortcuts
struct sc_mouse_scroll_event evt = {
.position = sc_input_manager_get_position(im, mouse_x, mouse_y),
#if SDL_VERSION_ATLEAST(2, 0, 18)
.hscroll = CLAMP(event->preciseX, -1.0f, 1.0f),
.vscroll = CLAMP(event->preciseY, -1.0f, 1.0f),
#else
.hscroll = CLAMP(event->x, -1, 1),
.vscroll = CLAMP(event->y, -1, 1),
#endif
.hscroll = event->x,
.vscroll = event->y,
.buttons_state = im->mouse_buttons_state,
};
@@ -907,47 +967,58 @@ sc_input_manager_process_mouse_wheel(struct sc_input_manager *im,
static void
sc_input_manager_process_gamepad_device(struct sc_input_manager *im,
const SDL_ControllerDeviceEvent *event) {
SDL_JoystickID id;
if (event->type == SDL_CONTROLLERDEVICEADDED) {
SDL_GameController *gc = SDL_GameControllerOpen(event->which);
const SDL_GamepadDeviceEvent *event) {
// Handle device added or removed even if paused
if (im->camera || !im->gp) {
return;
}
if (event->type == SDL_EVENT_GAMEPAD_ADDED) {
SDL_Gamepad *gc = SDL_OpenGamepad(event->which);
if (!gc) {
LOGW("Could not open game controller");
return;
}
SDL_Joystick *joystick = SDL_GameControllerGetJoystick(gc);
SDL_Joystick *joystick = SDL_GetGamepadJoystick(gc);
if (!joystick) {
LOGW("Could not get controller joystick");
SDL_GameControllerClose(gc);
SDL_CloseGamepad(gc);
return;
}
id = SDL_JoystickInstanceID(joystick);
} else if (event->type == SDL_CONTROLLERDEVICEREMOVED) {
id = event->which;
struct sc_gamepad_device_event evt = {
.gamepad_id = SDL_GetJoystickID(joystick),
};
im->gp->ops->process_gamepad_added(im->gp, &evt);
} else if (event->type == SDL_EVENT_GAMEPAD_REMOVED) {
SDL_JoystickID id = event->which;
SDL_GameController *gc = SDL_GameControllerFromInstanceID(id);
SDL_Gamepad *gc = SDL_GetGamepadFromID(id);
if (gc) {
SDL_GameControllerClose(gc);
SDL_CloseGamepad(gc);
} else {
LOGW("Unknown gamepad device removed");
}
struct sc_gamepad_device_event evt = {
.gamepad_id = id,
};
im->gp->ops->process_gamepad_removed(im->gp, &evt);
} else {
// Nothing to do
return;
}
struct sc_gamepad_device_event evt = {
.type = sc_gamepad_device_event_type_from_sdl_type(event->type),
.gamepad_id = id,
};
im->gp->ops->process_gamepad_device(im->gp, &evt);
}
static void
sc_input_manager_process_gamepad_axis(struct sc_input_manager *im,
const SDL_ControllerAxisEvent *event) {
const SDL_GamepadAxisEvent *event) {
if (im->camera || !im->gp || im->screen->paused) {
return;
}
enum sc_gamepad_axis axis = sc_gamepad_axis_from_sdl(event->axis);
if (axis == SC_GAMEPAD_AXIS_UNKNOWN) {
return;
@@ -963,7 +1034,11 @@ sc_input_manager_process_gamepad_axis(struct sc_input_manager *im,
static void
sc_input_manager_process_gamepad_button(struct sc_input_manager *im,
const SDL_ControllerButtonEvent *event) {
const SDL_GamepadButtonEvent *event) {
if (im->camera || !im->gp || im->screen->paused) {
return;
}
enum sc_gamepad_button button = sc_gamepad_button_from_sdl(event->button);
if (button == SC_GAMEPAD_BUTTON_UNKNOWN) {
return;
@@ -986,8 +1061,12 @@ is_apk(const char *file) {
static void
sc_input_manager_process_file(struct sc_input_manager *im,
const SDL_DropEvent *event) {
char *file = strdup(event->file);
SDL_free(event->file);
if (im->camera || !im->controller) {
return;
}
assert(event->type == SDL_EVENT_DROP_FILE);
char *file = strdup(event->data);
if (!file) {
LOG_OOM();
return;
@@ -1008,72 +1087,41 @@ sc_input_manager_process_file(struct sc_input_manager *im,
void
sc_input_manager_handle_event(struct sc_input_manager *im,
const SDL_Event *event) {
bool control = im->controller;
bool paused = im->screen->paused;
switch (event->type) {
case SDL_TEXTINPUT:
if (!im->kp || paused) {
break;
}
case SDL_EVENT_TEXT_INPUT:
sc_input_manager_process_text_input(im, &event->text);
break;
case SDL_KEYDOWN:
case SDL_KEYUP:
// some key events do not interact with the device, so process the
// event even if control is disabled
case SDL_EVENT_KEY_DOWN:
case SDL_EVENT_KEY_UP:
sc_input_manager_process_key(im, &event->key);
break;
case SDL_MOUSEMOTION:
if (!im->mp || paused) {
break;
}
case SDL_EVENT_MOUSE_MOTION:
sc_input_manager_process_mouse_motion(im, &event->motion);
break;
case SDL_MOUSEWHEEL:
if (!im->mp || paused) {
break;
}
case SDL_EVENT_MOUSE_WHEEL:
sc_input_manager_process_mouse_wheel(im, &event->wheel);
break;
case SDL_MOUSEBUTTONDOWN:
case SDL_MOUSEBUTTONUP:
// some mouse events do not interact with the device, so process
// the event even if control is disabled
case SDL_EVENT_MOUSE_BUTTON_DOWN:
case SDL_EVENT_MOUSE_BUTTON_UP:
sc_input_manager_process_mouse_button(im, &event->button);
break;
case SDL_FINGERMOTION:
case SDL_FINGERDOWN:
case SDL_FINGERUP:
if (!im->mp || paused) {
break;
}
case SDL_EVENT_FINGER_MOTION:
case SDL_EVENT_FINGER_DOWN:
case SDL_EVENT_FINGER_UP:
sc_input_manager_process_touch(im, &event->tfinger);
break;
case SDL_CONTROLLERDEVICEADDED:
case SDL_CONTROLLERDEVICEREMOVED:
// Handle device added or removed even if paused
if (!im->gp) {
break;
}
sc_input_manager_process_gamepad_device(im, &event->cdevice);
case SDL_EVENT_GAMEPAD_ADDED:
case SDL_EVENT_GAMEPAD_REMOVED:
sc_input_manager_process_gamepad_device(im, &event->gdevice);
break;
case SDL_CONTROLLERAXISMOTION:
if (!im->gp || paused) {
break;
}
sc_input_manager_process_gamepad_axis(im, &event->caxis);
case SDL_EVENT_GAMEPAD_AXIS_MOTION:
sc_input_manager_process_gamepad_axis(im, &event->gaxis);
break;
case SDL_CONTROLLERBUTTONDOWN:
case SDL_CONTROLLERBUTTONUP:
if (!im->gp || paused) {
break;
}
sc_input_manager_process_gamepad_button(im, &event->cbutton);
case SDL_EVENT_GAMEPAD_BUTTON_DOWN:
case SDL_EVENT_GAMEPAD_BUTTON_UP:
sc_input_manager_process_gamepad_button(im, &event->gbutton);
break;
case SDL_DROPFILE: {
if (!control) {
break;
}
case SDL_EVENT_DROP_FILE: {
sc_input_manager_process_file(im, &event->drop);
}
}

View File

@@ -4,12 +4,12 @@
#include "common.h"
#include <stdbool.h>
#include <SDL2/SDL.h>
#include <stdint.h>
#include <SDL3/SDL_events.h>
#include <SDL3/SDL_keycode.h>
#include "controller.h"
#include "file_pusher.h"
#include "fps_counter.h"
#include "options.h"
#include "trait/gamepad_processor.h"
#include "trait/key_processor.h"
@@ -24,6 +24,8 @@ struct sc_input_manager {
struct sc_mouse_processor *mp;
struct sc_gamepad_processor *gp;
bool camera;
struct sc_mouse_bindings mouse_bindings;
bool legacy_paste;
bool clipboard_autosync;
@@ -53,6 +55,7 @@ struct sc_input_manager_params {
struct sc_key_processor *kp;
struct sc_mouse_processor *mp;
struct sc_gamepad_processor *gp;
bool camera;
struct sc_mouse_bindings mouse_bindings;
bool legacy_paste;

View File

@@ -1,8 +1,13 @@
#include "keyboard_sdk.h"
#include <assert.h>
#include <ctype.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include "android/input.h"
#include "android/keycodes.h"
#include "control_msg.h"
#include "controller.h"
#include "input_events.h"

View File

@@ -1,14 +1,13 @@
#include "common.h"
#include <assert.h>
#include <stdbool.h>
#include <unistd.h>
#include <libavformat/avformat.h>
#include <stdio.h>
#ifdef HAVE_V4L2
# include <libavdevice/avdevice.h>
#endif
#define SDL_MAIN_HANDLED // avoid link error on Linux Windows Subsystem
#include <SDL2/SDL.h>
#define SDL_FUNCTION_POINTER_IS_VOID_POINTER
#include <SDL3/SDL_stdinc.h>
#include <SDL3/SDL.h>
#include "cli.h"
#include "options.h"

View File

@@ -20,14 +20,11 @@ bool
sc_mouse_capture_handle_event(struct sc_mouse_capture *mc,
const SDL_Event *event) {
switch (event->type) {
case SDL_WINDOWEVENT:
if (event->window.event == SDL_WINDOWEVENT_FOCUS_LOST) {
sc_mouse_capture_set_active(mc, false);
return true;
}
break;
case SDL_KEYDOWN: {
SDL_Keycode key = event->key.keysym.sym;
case SDL_EVENT_WINDOW_FOCUS_LOST:
sc_mouse_capture_set_active(mc, false);
return true;
case SDL_EVENT_KEY_DOWN: {
SDL_Keycode key = event->key.key;
if (sc_mouse_capture_is_capture_key(mc, key)) {
if (!mc->mouse_capture_key_pressed) {
mc->mouse_capture_key_pressed = key;
@@ -41,8 +38,8 @@ sc_mouse_capture_handle_event(struct sc_mouse_capture *mc,
}
break;
}
case SDL_KEYUP: {
SDL_Keycode key = event->key.keysym.sym;
case SDL_EVENT_KEY_UP: {
SDL_Keycode key = event->key.key;
SDL_Keycode cap = mc->mouse_capture_key_pressed;
mc->mouse_capture_key_pressed = 0;
if (sc_mouse_capture_is_capture_key(mc, key)) {
@@ -56,24 +53,24 @@ sc_mouse_capture_handle_event(struct sc_mouse_capture *mc,
}
break;
}
case SDL_MOUSEWHEEL:
case SDL_MOUSEMOTION:
case SDL_MOUSEBUTTONDOWN:
case SDL_EVENT_MOUSE_WHEEL:
case SDL_EVENT_MOUSE_MOTION:
case SDL_EVENT_MOUSE_BUTTON_DOWN:
if (!sc_mouse_capture_is_active(mc)) {
// The mouse will be captured on SDL_MOUSEBUTTONUP, so consume
// the event
return true;
}
break;
case SDL_MOUSEBUTTONUP:
case SDL_EVENT_MOUSE_BUTTON_UP:
if (!sc_mouse_capture_is_active(mc)) {
sc_mouse_capture_set_active(mc, true);
return true;
}
break;
case SDL_FINGERMOTION:
case SDL_FINGERDOWN:
case SDL_FINGERUP:
case SDL_EVENT_FINGER_MOTION:
case SDL_EVENT_FINGER_DOWN:
case SDL_EVENT_FINGER_UP:
// Touch events are not compatible with relative mode
// (coordinates are not relative), so consume the event
return true;
@@ -84,27 +81,8 @@ sc_mouse_capture_handle_event(struct sc_mouse_capture *mc,
void
sc_mouse_capture_set_active(struct sc_mouse_capture *mc, bool capture) {
#ifdef __APPLE__
// Workaround for SDL bug on macOS:
// <https://github.com/libsdl-org/SDL/issues/5340>
if (capture) {
int mouse_x, mouse_y;
SDL_GetGlobalMouseState(&mouse_x, &mouse_y);
int x, y, w, h;
SDL_GetWindowPosition(mc->window, &x, &y);
SDL_GetWindowSize(mc->window, &w, &h);
bool outside_window = mouse_x < x || mouse_x >= x + w
|| mouse_y < y || mouse_y >= y + h;
if (outside_window) {
SDL_WarpMouseInWindow(mc->window, w / 2, h / 2);
}
}
#else
(void) mc;
#endif
if (SDL_SetRelativeMouseMode(capture)) {
bool ok = SDL_SetWindowRelativeMouseMode(mc->window, capture);
if (!ok) {
LOGE("Could not set relative mouse mode to %s: %s",
capture ? "true" : "false", SDL_GetError());
}
@@ -112,8 +90,7 @@ sc_mouse_capture_set_active(struct sc_mouse_capture *mc, bool capture) {
bool
sc_mouse_capture_is_active(struct sc_mouse_capture *mc) {
(void) mc;
return SDL_GetRelativeMouseMode();
return SDL_GetWindowRelativeMouseMode(mc->window);
}
void

View File

@@ -5,7 +5,7 @@
#include <stdbool.h>
#include <SDL2/SDL.h>
#include <SDL3/SDL.h>
struct sc_mouse_capture {
SDL_Window *window;

View File

@@ -1,12 +1,12 @@
#include "mouse_sdk.h"
#include <assert.h>
#include <stdint.h>
#include "android/input.h"
#include "control_msg.h"
#include "controller.h"
#include "input_events.h"
#include "util/intmap.h"
#include "util/log.h"
/** Downcast mouse processor to sc_mouse_sdk */

View File

@@ -6,7 +6,6 @@
#include <stdbool.h>
#include "controller.h"
#include "screen.h"
#include "trait/mouse_processor.h"
struct sc_mouse_sdk {

View File

@@ -2,21 +2,30 @@
#include <assert.h>
#include <stdio.h>
#include "SDL2/SDL.h"
#include <string.h>
#include <SDL3/SDL.h>
void
sc_opengl_init(struct sc_opengl *gl) {
gl->GetString = SDL_GL_GetProcAddress("glGetString");
gl->GetString = (const GLubyte *(*)(GLenum))
SDL_GL_GetProcAddress("glGetString");
assert(gl->GetString);
gl->TexParameterf = SDL_GL_GetProcAddress("glTexParameterf");
gl->BindTexture = (void (*)(GLenum, GLuint))
SDL_GL_GetProcAddress("glBindTexture");
assert(gl->BindTexture);
gl->TexParameterf = (void (*)(GLenum, GLenum, GLfloat))
SDL_GL_GetProcAddress("glTexParameterf");
assert(gl->TexParameterf);
gl->TexParameteri = SDL_GL_GetProcAddress("glTexParameteri");
gl->TexParameteri = (void (*)(GLenum, GLenum, GLint))
SDL_GL_GetProcAddress("glTexParameteri");
assert(gl->TexParameteri);
// optional
gl->GenerateMipmap = SDL_GL_GetProcAddress("glGenerateMipmap");
gl->GenerateMipmap = (void (*)(GLenum))
SDL_GL_GetProcAddress("glGenerateMipmap");
const char *version = (const char *) gl->GetString(GL_VERSION);
assert(version);

View File

@@ -4,7 +4,7 @@
#include "common.h"
#include <stdbool.h>
#include <SDL2/SDL_opengl.h>
#include <SDL3/SDL_opengl.h>
struct sc_opengl {
const char *version;
@@ -15,6 +15,9 @@ struct sc_opengl {
const GLubyte *
(*GetString)(GLenum name);
void
(*BindTexture)(GLenum target, GLuint texture);
void
(*TexParameterf)(GLenum target, GLenum pname, GLfloat param);

View File

@@ -1,5 +1,7 @@
#include "options.h"
#include <stddef.h>
const struct scrcpy_options scrcpy_options_default = {
.serial = NULL,
.crop = NULL,
@@ -54,6 +56,7 @@ const struct scrcpy_options scrcpy_options_default = {
.capture_orientation_lock = SC_ORIENTATION_UNLOCKED,
.display_orientation = SC_ORIENTATION_0,
.record_orientation = SC_ORIENTATION_0,
.display_ime_policy = SC_DISPLAY_IME_POLICY_UNDEFINED,
.window_x = SC_WINDOW_POSITION_UNDEFINED,
.window_y = SC_WINDOW_POSITION_UNDEFINED,
.window_width = 0,
@@ -108,7 +111,9 @@ const struct scrcpy_options scrcpy_options_default = {
.new_display = NULL,
.start_app = NULL,
.angle = NULL,
.vd_destroy_content = true,
.vd_system_decorations = true,
.camera_torch = false,
};
enum sc_orientation

View File

@@ -5,7 +5,6 @@
#include <assert.h>
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
#include "util/tick.h"
@@ -60,6 +59,14 @@ enum sc_audio_source {
SC_AUDIO_SOURCE_OUTPUT,
SC_AUDIO_SOURCE_MIC,
SC_AUDIO_SOURCE_PLAYBACK,
SC_AUDIO_SOURCE_MIC_UNPROCESSED,
SC_AUDIO_SOURCE_MIC_CAMCORDER,
SC_AUDIO_SOURCE_MIC_VOICE_RECOGNITION,
SC_AUDIO_SOURCE_MIC_VOICE_COMMUNICATION,
SC_AUDIO_SOURCE_VOICE_CALL,
SC_AUDIO_SOURCE_VOICE_CALL_UPLINK,
SC_AUDIO_SOURCE_VOICE_CALL_DOWNLINK,
SC_AUDIO_SOURCE_VOICE_PERFORMANCE,
};
enum sc_camera_facing {
@@ -90,6 +97,13 @@ enum sc_orientation_lock {
SC_ORIENTATION_LOCKED_INITIAL, // lock to initial device orientation
};
enum sc_display_ime_policy {
SC_DISPLAY_IME_POLICY_UNDEFINED,
SC_DISPLAY_IME_POLICY_LOCAL,
SC_DISPLAY_IME_POLICY_FALLBACK,
SC_DISPLAY_IME_POLICY_HIDE,
};
static inline bool
sc_orientation_is_mirror(enum sc_orientation orientation) {
assert(!(orientation & ~7));
@@ -252,6 +266,7 @@ struct scrcpy_options {
enum sc_orientation_lock capture_orientation_lock;
enum sc_orientation display_orientation;
enum sc_orientation record_orientation;
enum sc_display_ime_policy display_ime_policy;
int16_t window_x; // SC_WINDOW_POSITION_UNDEFINED for "auto"
int16_t window_y; // SC_WINDOW_POSITION_UNDEFINED for "auto"
uint16_t window_width;
@@ -310,7 +325,9 @@ struct scrcpy_options {
bool audio_dup;
const char *new_display; // [<width>x<height>][/<dpi>] parsed by the server
const char *start_app;
bool vd_destroy_content;
bool vd_system_decorations;
bool camera_torch;
};
extern const struct scrcpy_options scrcpy_options_default;

View File

@@ -1,5 +1,9 @@
#include "packet_merger.h"
#include <stdlib.h>
#include <string.h>
#include <libavutil/avutil.h>
#include "util/log.h"
void

View File

@@ -5,7 +5,7 @@
#include <stdbool.h>
#include <stdint.h>
#include <libavcodec/avcodec.h>
#include <libavcodec/packet.h>
/**
* Config packets (containing the SPS/PPS) are sent in-band. A new config

View File

@@ -2,8 +2,8 @@
#include <assert.h>
#include <inttypes.h>
#include <stdint.h>
#include <SDL2/SDL_clipboard.h>
#include <stdlib.h>
#include <SDL3/SDL_clipboard.h>
#include "device_msg.h"
#include "events.h"
@@ -54,8 +54,12 @@ task_set_clipboard(void *userdata) {
if (same) {
LOGD("Computer clipboard unchanged");
} else {
LOGI("Device clipboard copied");
SDL_SetClipboardText(text);
bool ok = SDL_SetClipboardText(text);
if (ok) {
LOGI("Device clipboard copied");
} else {
LOGE("Could not set clipboard: %s", SDL_GetError());
}
}
free(text);

View File

@@ -1,6 +1,9 @@
#include "recorder.h"
#include <assert.h>
#include <inttypes.h>
#include <stdlib.h>
#include <string.h>
#include <libavcodec/avcodec.h>
#include <libavformat/avformat.h>
#include <libavutil/time.h>
@@ -538,7 +541,10 @@ sc_recorder_set_orientation(AVStream *stream, enum sc_orientation orientation) {
static bool
sc_recorder_video_packet_sink_open(struct sc_packet_sink *sink,
AVCodecContext *ctx) {
AVCodecContext *ctx,
const struct sc_stream_session *session) {
(void) session;
struct sc_recorder *recorder = DOWNCAST_VIDEO(sink);
// only written from this thread, no need to lock
assert(!recorder->video_init);
@@ -632,7 +638,10 @@ sc_recorder_video_packet_sink_push(struct sc_packet_sink *sink,
static bool
sc_recorder_audio_packet_sink_open(struct sc_packet_sink *sink,
AVCodecContext *ctx) {
AVCodecContext *ctx,
const struct sc_stream_session *session) {
(void) session;
struct sc_recorder *recorder = DOWNCAST_AUDIO(sink);
assert(recorder->audio);
// only written from this thread, no need to lock

View File

@@ -4,9 +4,10 @@
#include "common.h"
#include <stdbool.h>
#include <stdint.h>
#include <libavcodec/packet.h>
#include <libavformat/avformat.h>
#include "coords.h"
#include "options.h"
#include "trait/packet_sink.h"
#include "util/thread.h"

View File

@@ -1,11 +1,12 @@
#include "scrcpy.h"
#include <assert.h>
#include <inttypes.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <libavformat/avformat.h>
#include <sys/time.h>
#include <SDL2/SDL.h>
#include <SDL3/SDL.h>
#ifdef _WIN32
// not needed here, but winsock2.h must never be included AFTER windows.h
@@ -37,9 +38,9 @@
#endif
#include "util/acksync.h"
#include "util/log.h"
#include "util/net.h"
#include "util/rand.h"
#include "util/timeout.h"
#include "util/tick.h"
#ifdef HAVE_V4L2
# include "v4l2_sink.h"
#endif
@@ -92,8 +93,8 @@ struct scrcpy {
#ifdef _WIN32
static BOOL WINAPI windows_ctrl_handler(DWORD ctrl_type) {
if (ctrl_type == CTRL_C_EVENT) {
sc_push_event(SDL_QUIT);
if (ctrl_type == CTRL_C_EVENT || ctrl_type == CTRL_BREAK_EVENT) {
sc_push_event(SDL_EVENT_QUIT);
return TRUE;
}
return FALSE;
@@ -106,9 +107,9 @@ sdl_set_hints(const char *render_driver) {
LOGW("Could not set render driver");
}
// Linear filtering
if (!SDL_SetHint(SDL_HINT_RENDER_SCALE_QUALITY, "1")) {
LOGW("Could not enable linear filtering");
// App name used in various contexts (such as PulseAudio)
if (!SDL_SetHint(SDL_HINT_APP_NAME, "scrcpy")) {
LOGW("Could not set app name");
}
// Handle a click to gain focus as any other click
@@ -116,21 +117,17 @@ sdl_set_hints(const char *render_driver) {
LOGW("Could not enable mouse focus clickthrough");
}
#ifdef SCRCPY_SDL_HAS_HINT_TOUCH_MOUSE_EVENTS
// Disable synthetic mouse events from touch events
// Touch events with id SDL_TOUCH_MOUSEID are ignored anyway, but it is
// better not to generate them in the first place.
if (!SDL_SetHint(SDL_HINT_TOUCH_MOUSE_EVENTS, "0")) {
LOGW("Could not disable synthetic mouse events");
}
#endif
#ifdef SCRCPY_SDL_HAS_HINT_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR
// Disable compositor bypassing on X11
if (!SDL_SetHint(SDL_HINT_VIDEO_X11_NET_WM_BYPASS_COMPOSITOR, "0")) {
LOGW("Could not disable X11 compositor bypass");
}
#endif
// Do not minimize on focus loss
if (!SDL_SetHint(SDL_HINT_VIDEO_MINIMIZE_ON_FOCUS_LOSS, "0")) {
@@ -157,14 +154,20 @@ sdl_configure(bool video_playback, bool disable_screensaver) {
}
if (disable_screensaver) {
SDL_DisableScreenSaver();
bool ok = SDL_DisableScreenSaver();
if (!ok) {
LOGW("Could not disable screen saver");
}
} else {
SDL_EnableScreenSaver();
bool ok = SDL_EnableScreenSaver();
if (!ok) {
LOGW("Could not enable screen saver");
}
}
}
static enum scrcpy_exit_code
event_loop(struct scrcpy *s) {
event_loop(struct scrcpy *s, bool has_screen) {
SDL_Event event;
while (SDL_WaitEvent(&event)) {
switch (event.type) {
@@ -186,7 +189,7 @@ event_loop(struct scrcpy *s) {
case SC_EVENT_TIME_LIMIT_REACHED:
LOGI("Time limit reached");
return SCRCPY_EXIT_SUCCESS;
case SDL_QUIT:
case SDL_EVENT_QUIT:
LOGD("User requested to quit");
return SCRCPY_EXIT_SUCCESS;
case SC_EVENT_RUN_ON_MAIN_THREAD: {
@@ -196,7 +199,7 @@ event_loop(struct scrcpy *s) {
break;
}
default:
if (!sc_screen_handle_event(&s->screen, &event)) {
if (has_screen && !sc_screen_handle_event(&s->screen, &event)) {
return SCRCPY_EXIT_FAILURE;
}
break;
@@ -226,7 +229,7 @@ await_for_server(bool *connected) {
SDL_Event event;
while (SDL_WaitEvent(&event)) {
switch (event.type) {
case SDL_QUIT:
case SDL_EVENT_QUIT:
if (connected) {
*connected = false;
}
@@ -354,12 +357,19 @@ static void
init_sdl_gamepads(void) {
// Trigger a SDL_CONTROLLERDEVICEADDED event for all gamepads already
// connected
int num_joysticks = SDL_NumJoysticks();
for (int i = 0; i < num_joysticks; ++i) {
if (SDL_IsGameController(i)) {
int count;
SDL_JoystickID *joysticks = SDL_GetJoysticks(&count);
if (!joysticks) {
LOGE("Could not list joysticks: %s", SDL_GetError());
return;
}
for (int i = 0; i < count; ++i) {
SDL_JoystickID joystick = joysticks[i];
if (SDL_IsGamepad(joystick)) {
SDL_Event event;
event.cdevice.type = SDL_CONTROLLERDEVICEADDED;
event.cdevice.which = i;
event.gdevice.type = SDL_EVENT_GAMEPAD_ADDED;
event.gdevice.which = i;
SDL_PushEvent(&event);
}
}
@@ -375,7 +385,7 @@ scrcpy(struct scrcpy_options *options) {
struct scrcpy *s = &scrcpy;
// Minimal SDL initialization
if (SDL_Init(SDL_INIT_EVENTS)) {
if (!SDL_Init(SDL_INIT_EVENTS)) {
LOGE("Could not initialize SDL: %s", SDL_GetError());
return SCRCPY_EXIT_FAILURE;
}
@@ -435,6 +445,7 @@ scrcpy(struct scrcpy_options *options) {
.control = options->control,
.display_id = options->display_id,
.new_display = options->new_display,
.display_ime_policy = options->display_ime_policy,
.video = options->video,
.audio = options->audio,
.audio_dup = options->audio_dup,
@@ -458,6 +469,8 @@ scrcpy(struct scrcpy_options *options) {
.power_on = options->power_on,
.kill_adb_on_close = options->kill_adb_on_close,
.camera_high_speed = options->camera_high_speed,
.camera_torch = options->camera_torch,
.vd_destroy_content = options->vd_destroy_content,
.vd_system_decorations = options->vd_system_decorations,
.list = options->list,
};
@@ -499,7 +512,7 @@ scrcpy(struct scrcpy_options *options) {
// --no-video-playback is passed so that clipboard synchronization
// still works.
// <https://github.com/Genymobile/scrcpy/issues/4418>
if (SDL_Init(SDL_INIT_VIDEO)) {
if (!SDL_Init(SDL_INIT_VIDEO)) {
// If it fails, it is an error only if video playback is enabled
if (options->video_playback) {
LOGE("Could not initialize SDL video: %s", SDL_GetError());
@@ -511,14 +524,14 @@ scrcpy(struct scrcpy_options *options) {
}
if (options->audio_playback) {
if (SDL_Init(SDL_INIT_AUDIO)) {
if (!SDL_Init(SDL_INIT_AUDIO)) {
LOGE("Could not initialize SDL audio: %s", SDL_GetError());
goto end;
}
}
if (options->gamepad_input_mode != SC_GAMEPAD_INPUT_MODE_DISABLED) {
if (SDL_Init(SDL_INIT_GAMECONTROLLER)) {
if (!SDL_Init(SDL_INIT_GAMEPAD)) {
LOGE("Could not initialize SDL gamepad: %s", SDL_GetError());
goto end;
}
@@ -790,6 +803,7 @@ aoa_complete:
struct sc_screen_params screen_params = {
.video = options->video_playback,
.camera = options->video_source == SC_VIDEO_SOURCE_CAMERA,
.controller = controller,
.fp = fp,
.kp = kp,
@@ -930,7 +944,7 @@ aoa_complete:
}
}
ret = event_loop(s);
ret = event_loop(s, options->window);
terminate_event_loop();
LOGD("quit...");

View File

@@ -3,7 +3,6 @@
#include "common.h"
#include <stdbool.h>
#include "options.h"
enum scrcpy_exit_code {

View File

@@ -2,12 +2,13 @@
#include <assert.h>
#include <string.h>
#include <SDL2/SDL.h>
#include <SDL3/SDL.h>
#include "events.h"
#include "icon.h"
#include "options.h"
#include "util/log.h"
#include "util/sdl.h"
#define DISPLAY_MARGINS 96
@@ -26,45 +27,22 @@ get_oriented_size(struct sc_size size, enum sc_orientation orientation) {
return oriented_size;
}
// get the window size in a struct sc_size
static struct sc_size
get_window_size(const struct sc_screen *screen) {
int width;
int height;
SDL_GetWindowSize(screen->window, &width, &height);
struct sc_size size;
size.width = width;
size.height = height;
return size;
}
static struct sc_point
get_window_position(const struct sc_screen *screen) {
int x;
int y;
SDL_GetWindowPosition(screen->window, &x, &y);
struct sc_point point;
point.x = x;
point.y = y;
return point;
}
// set the window size to be applied when fullscreen is disabled
static void
set_window_size(struct sc_screen *screen, struct sc_size new_size) {
static inline void
assert_not_fullscreen(struct sc_screen *screen) {
(void) screen;
assert(!screen->fullscreen);
assert(!screen->maximized);
assert(!screen->minimized);
SDL_SetWindowSize(screen->window, new_size.width, new_size.height);
}
// get the preferred display bounds (i.e. the screen bounds with some margins)
static bool
get_preferred_display_bounds(struct sc_size *bounds) {
SDL_Rect rect;
if (SDL_GetDisplayUsableBounds(0, &rect)) {
SDL_DisplayID display = SDL_GetPrimaryDisplay();
bool ok = SDL_GetDisplayUsableBounds(display, &rect);
if (!ok) {
LOGW("Could not get display usable bounds: %s", SDL_GetError());
return false;
}
@@ -166,13 +144,10 @@ static void
sc_screen_update_content_rect(struct sc_screen *screen) {
assert(screen->video);
int dw;
int dh;
SDL_GL_GetDrawableSize(screen->window, &dw, &dh);
struct sc_size content_size = screen->content_size;
// The drawable size is the window size * the HiDPI scale
struct sc_size drawable_size = {dw, dh};
struct sc_size drawable_size =
sc_sdl_get_window_size_in_pixels(screen->window);
SDL_Rect *rect = &screen->rect;
@@ -208,6 +183,7 @@ sc_screen_update_content_rect(struct sc_screen *screen) {
static void
sc_screen_render(struct sc_screen *screen, bool update_content_rect) {
assert(screen->video);
assert(screen->has_video_window);
if (update_content_rect) {
sc_screen_update_content_rect(screen);
@@ -225,7 +201,7 @@ sc_screen_render_novideo(struct sc_screen *screen) {
(void) res; // any error already logged
}
#if defined(__APPLE__) || defined(__WINDOWS__)
#if defined(__APPLE__) || defined(_WIN32)
# define CONTINUOUS_RESIZING_WORKAROUND
#endif
@@ -235,28 +211,31 @@ sc_screen_render_novideo(struct sc_screen *screen) {
//
// <https://bugzilla.libsdl.org/show_bug.cgi?id=2077>
// <https://stackoverflow.com/a/40693139/1987178>
static int
static bool
event_watcher(void *data, SDL_Event *event) {
struct sc_screen *screen = data;
assert(screen->video);
if (event->type == SDL_WINDOWEVENT
&& event->window.event == SDL_WINDOWEVENT_RESIZED) {
if (event->type == SDL_EVENT_WINDOW_EXPOSED) {
// In practice, it seems to always be called from the same thread in
// that specific case. Anyway, it's just a workaround.
sc_screen_render(screen, true);
}
return 0;
return true;
}
#endif
static bool
sc_screen_frame_sink_open(struct sc_frame_sink *sink,
const AVCodecContext *ctx) {
const AVCodecContext *ctx,
const struct sc_stream_session *session) {
assert(ctx->pix_fmt == AV_PIX_FMT_YUV420P);
(void) ctx;
(void) session;
struct sc_screen *screen = DOWNCAST(sink);
(void) screen;
if (ctx->width <= 0 || ctx->width > 0xFFFF
|| ctx->height <= 0 || ctx->height > 0xFFFF) {
@@ -264,19 +243,6 @@ sc_screen_frame_sink_open(struct sc_frame_sink *sink,
return false;
}
assert(ctx->width > 0 && ctx->width <= 0xFFFF);
assert(ctx->height > 0 && ctx->height <= 0xFFFF);
// screen->frame_size is never used before the event is pushed, and the
// event acts as a memory barrier so it is safe without mutex
screen->frame_size.width = ctx->width;
screen->frame_size.height = ctx->height;
// Post the event on the UI thread (the texture must be created from there)
bool ok = sc_push_event(SC_EVENT_SCREEN_INIT_SIZE);
if (!ok) {
return false;
}
#ifndef NDEBUG
screen->open = true;
#endif
@@ -327,6 +293,7 @@ sc_screen_init(struct sc_screen *screen,
const struct sc_screen_params *params) {
screen->resize_pending = false;
screen->has_frame = false;
screen->has_video_window = false;
screen->fullscreen = false;
screen->maximized = false;
screen->minimized = false;
@@ -335,6 +302,7 @@ sc_screen_init(struct sc_screen *screen,
screen->orientation = SC_ORIENTATION_0;
screen->video = params->video;
screen->camera = params->camera;
screen->req.x = params->window_x;
screen->req.y = params->window_y;
@@ -360,7 +328,7 @@ sc_screen_init(struct sc_screen *screen,
}
}
uint32_t window_flags = SDL_WINDOW_ALLOW_HIGHDPI;
uint32_t window_flags = SDL_WINDOW_HIGH_PIXEL_DENSITY;
if (params->always_on_top) {
window_flags |= SDL_WINDOW_ALWAYS_ON_TOP;
}
@@ -394,22 +362,31 @@ sc_screen_init(struct sc_screen *screen,
}
// The window will be positioned and sized on first video frame
screen->window = SDL_CreateWindow(title, x, y, width, height, window_flags);
screen->window =
sc_sdl_create_window(title, x, y, width, height, window_flags);
if (!screen->window) {
LOGE("Could not create window: %s", SDL_GetError());
goto error_destroy_fps_counter;
}
ok = SDL_StartTextInput(screen->window);
if (!ok) {
LOGE("Could not enable text input: %s", SDL_GetError());
goto error_destroy_window;
}
SDL_Surface *icon = scrcpy_icon_load();
if (icon) {
SDL_SetWindowIcon(screen->window, icon);
if (!SDL_SetWindowIcon(screen->window, icon)) {
LOGW("Could not set window icon: %s", SDL_GetError());
}
} else if (params->video) {
// just a warning
LOGW("Could not load icon");
} else {
// without video, the icon is used as window content, it must be present
LOGE("Could not load icon");
goto error_destroy_fps_counter;
goto error_destroy_window;
}
SDL_Surface *icon_novideo = params->video ? NULL : icon;
@@ -436,6 +413,7 @@ sc_screen_init(struct sc_screen *screen,
.kp = params->kp,
.mp = params->mp,
.gp = params->gp,
.camera = params->camera,
.mouse_bindings = params->mouse_bindings,
.legacy_paste = params->legacy_paste,
.clipboard_autosync = params->clipboard_autosync,
@@ -449,7 +427,11 @@ sc_screen_init(struct sc_screen *screen,
#ifdef CONTINUOUS_RESIZING_WORKAROUND
if (screen->video) {
SDL_AddEventWatch(event_watcher, screen);
ok = SDL_AddEventWatch(event_watcher, screen);
if (!ok) {
LOGW("Could not add event watcher for continuous resizing: %s",
SDL_GetError());
}
}
#endif
@@ -490,13 +472,18 @@ sc_screen_show_initial_window(struct sc_screen *screen) {
? screen->req.x : (int) SDL_WINDOWPOS_CENTERED;
int y = screen->req.y != SC_WINDOW_POSITION_UNDEFINED
? screen->req.y : (int) SDL_WINDOWPOS_CENTERED;
struct sc_point position = {
.x = x,
.y = y,
};
struct sc_size window_size =
get_initial_optimal_size(screen->content_size, screen->req.width,
screen->req.height);
set_window_size(screen, window_size);
SDL_SetWindowPosition(screen->window, x, y);
assert_not_fullscreen(screen);
sc_sdl_set_window_size(screen->window, window_size);
sc_sdl_set_window_position(screen->window, position);
if (screen->req.fullscreen) {
sc_screen_toggle_fullscreen(screen);
@@ -506,13 +493,13 @@ sc_screen_show_initial_window(struct sc_screen *screen) {
sc_fps_counter_start(&screen->fps_counter);
}
SDL_ShowWindow(screen->window);
sc_sdl_show_window(screen->window);
sc_screen_update_content_rect(screen);
}
void
sc_screen_hide_window(struct sc_screen *screen) {
SDL_HideWindow(screen->window);
sc_sdl_hide_window(screen->window);
}
void
@@ -542,7 +529,7 @@ resize_for_content(struct sc_screen *screen, struct sc_size old_content_size,
struct sc_size new_content_size) {
assert(screen->video);
struct sc_size window_size = get_window_size(screen);
struct sc_size window_size = sc_sdl_get_window_size(screen->window);
struct sc_size target_size = {
.width = (uint32_t) window_size.width * new_content_size.width
/ old_content_size.width,
@@ -550,7 +537,8 @@ resize_for_content(struct sc_screen *screen, struct sc_size old_content_size,
/ old_content_size.height,
};
target_size = get_optimal_size(target_size, new_content_size, true);
set_window_size(screen, target_size);
assert_not_fullscreen(screen);
sc_sdl_set_window_size(screen->window, target_size);
}
static void
@@ -603,44 +591,6 @@ sc_screen_set_orientation(struct sc_screen *screen,
sc_screen_render(screen, true);
}
static bool
sc_screen_init_size(struct sc_screen *screen) {
// Before first frame
assert(!screen->has_frame);
// The requested size is passed via screen->frame_size
struct sc_size content_size =
get_oriented_size(screen->frame_size, screen->orientation);
screen->content_size = content_size;
enum sc_display_result res =
sc_display_set_texture_size(&screen->display, screen->frame_size);
return res != SC_DISPLAY_RESULT_ERROR;
}
// recreate the texture and resize the window if the frame size has changed
static enum sc_display_result
prepare_for_frame(struct sc_screen *screen, struct sc_size new_frame_size) {
assert(screen->video);
if (screen->frame_size.width == new_frame_size.width
&& screen->frame_size.height == new_frame_size.height) {
return SC_DISPLAY_RESULT_OK;
}
// frame dimension changed
screen->frame_size = new_frame_size;
struct sc_size new_content_size =
get_oriented_size(new_frame_size, screen->orientation);
set_content_size(screen, new_content_size);
sc_screen_update_content_rect(screen);
return sc_display_set_texture_size(&screen->display, screen->frame_size);
}
static bool
sc_screen_apply_frame(struct sc_screen *screen) {
assert(screen->video);
@@ -649,7 +599,38 @@ sc_screen_apply_frame(struct sc_screen *screen) {
AVFrame *frame = screen->frame;
struct sc_size new_frame_size = {frame->width, frame->height};
enum sc_display_result res = prepare_for_frame(screen, new_frame_size);
if (!screen->has_frame
|| screen->frame_size.width != new_frame_size.width
|| screen->frame_size.height != new_frame_size.height) {
// frame dimension changed
screen->frame_size = new_frame_size;
struct sc_size new_content_size =
get_oriented_size(new_frame_size, screen->orientation);
if (screen->has_frame) {
set_content_size(screen, new_content_size);
sc_screen_update_content_rect(screen);
} else {
// This is the first frame
screen->has_frame = true;
screen->content_size = new_content_size;
}
enum sc_display_result res =
sc_display_prepare_texture(&screen->display, screen->frame_size,
frame->colorspace, frame->color_range);
if (res == SC_DISPLAY_RESULT_ERROR) {
return false;
}
if (res == SC_DISPLAY_RESULT_PENDING) {
// Not an error, but do not continue
return true;
}
}
enum sc_display_result res =
sc_display_update_texture(&screen->display, frame);
if (res == SC_DISPLAY_RESULT_ERROR) {
return false;
}
@@ -658,17 +639,9 @@ sc_screen_apply_frame(struct sc_screen *screen) {
return true;
}
res = sc_display_update_texture(&screen->display, frame);
if (res == SC_DISPLAY_RESULT_ERROR) {
return false;
}
if (res == SC_DISPLAY_RESULT_PENDING) {
// Not an error, but do not continue
return true;
}
if (!screen->has_frame) {
screen->has_frame = true;
assert(screen->has_frame);
if (!screen->has_video_window) {
screen->has_video_window = true;
// this is the very first frame, show the window
sc_screen_show_initial_window(screen);
@@ -738,8 +711,8 @@ void
sc_screen_toggle_fullscreen(struct sc_screen *screen) {
assert(screen->video);
uint32_t new_mode = screen->fullscreen ? 0 : SDL_WINDOW_FULLSCREEN_DESKTOP;
if (SDL_SetWindowFullscreen(screen->window, new_mode)) {
bool ok = SDL_SetWindowFullscreen(screen->window, !screen->fullscreen);
if (!ok) {
LOGW("Could not switch fullscreen mode: %s", SDL_GetError());
return;
}
@@ -761,8 +734,8 @@ sc_screen_resize_to_fit(struct sc_screen *screen) {
return;
}
struct sc_point point = get_window_position(screen);
struct sc_size window_size = get_window_size(screen);
struct sc_point point = sc_sdl_get_window_position(screen->window);
struct sc_size window_size = sc_sdl_get_window_size(screen->window);
struct sc_size optimal_size =
get_optimal_size(window_size, screen->content_size, false);
@@ -770,11 +743,14 @@ sc_screen_resize_to_fit(struct sc_screen *screen) {
// Center the window related to the device screen
assert(optimal_size.width <= window_size.width);
assert(optimal_size.height <= window_size.height);
uint32_t new_x = point.x + (window_size.width - optimal_size.width) / 2;
uint32_t new_y = point.y + (window_size.height - optimal_size.height) / 2;
SDL_SetWindowSize(screen->window, optimal_size.width, optimal_size.height);
SDL_SetWindowPosition(screen->window, new_x, new_y);
struct sc_point new_position = {
.x = point.x + (window_size.width - optimal_size.width) / 2,
.y = point.y + (window_size.height - optimal_size.height) / 2,
};
sc_sdl_set_window_size(screen->window, optimal_size);
sc_sdl_set_window_position(screen->window, new_position);
LOGD("Resized to optimal size: %ux%u", optimal_size.width,
optimal_size.height);
}
@@ -788,28 +764,21 @@ sc_screen_resize_to_pixel_perfect(struct sc_screen *screen) {
}
if (screen->maximized) {
SDL_RestoreWindow(screen->window);
sc_sdl_restore_window(screen->window);
screen->maximized = false;
}
struct sc_size content_size = screen->content_size;
SDL_SetWindowSize(screen->window, content_size.width, content_size.height);
sc_sdl_set_window_size(screen->window, content_size);
LOGD("Resized to pixel-perfect: %ux%u", content_size.width,
content_size.height);
}
bool
sc_screen_handle_event(struct sc_screen *screen, const SDL_Event *event) {
// !video implies !has_video_window
assert(screen->video || !screen->has_video_window);
switch (event->type) {
case SC_EVENT_SCREEN_INIT_SIZE: {
// The initial size is passed via screen->frame_size
bool ok = sc_screen_init_size(screen);
if (!ok) {
LOGE("Could not initialize screen size");
return false;
}
return true;
}
case SC_EVENT_NEW_FRAME: {
bool ok = sc_screen_update_frame(screen);
if (!ok) {
@@ -818,45 +787,38 @@ sc_screen_handle_event(struct sc_screen *screen, const SDL_Event *event) {
}
return true;
}
case SDL_WINDOWEVENT:
if (!screen->video
&& event->window.event == SDL_WINDOWEVENT_EXPOSED) {
case SDL_EVENT_WINDOW_EXPOSED:
if (!screen->video) {
sc_screen_render_novideo(screen);
} else if (screen->has_video_window) {
sc_screen_render(screen, true);
}
// !video implies !has_frame
assert(screen->video || !screen->has_frame);
if (!screen->has_frame) {
// Do nothing
return true;
case SDL_EVENT_WINDOW_PIXEL_SIZE_CHANGED:
if (screen->has_video_window) {
sc_screen_render(screen, true);
}
return true;
case SDL_EVENT_WINDOW_MAXIMIZED:
screen->maximized = true;
return true;
case SDL_EVENT_WINDOW_MINIMIZED:
screen->minimized = true;
return true;
case SDL_EVENT_WINDOW_RESTORED:
if (screen->fullscreen) {
// On Windows, in maximized+fullscreen, disabling
// fullscreen mode unexpectedly triggers the "restored"
// then "maximized" events, leaving the window in a
// weird state (maximized according to the events, but
// not maximized visually).
return true;
}
switch (event->window.event) {
case SDL_WINDOWEVENT_EXPOSED:
sc_screen_render(screen, true);
break;
case SDL_WINDOWEVENT_SIZE_CHANGED:
sc_screen_render(screen, true);
break;
case SDL_WINDOWEVENT_MAXIMIZED:
screen->maximized = true;
break;
case SDL_WINDOWEVENT_MINIMIZED:
screen->minimized = true;
break;
case SDL_WINDOWEVENT_RESTORED:
if (screen->fullscreen) {
// On Windows, in maximized+fullscreen, disabling
// fullscreen mode unexpectedly triggers the "restored"
// then "maximized" events, leaving the window in a
// weird state (maximized according to the events, but
// not maximized visually).
break;
}
screen->maximized = false;
screen->minimized = false;
apply_pending_resize(screen);
sc_screen_render(screen, true);
break;
screen->maximized = false;
screen->minimized = false;
if (screen->has_video_window) {
apply_pending_resize(screen);
sc_screen_render(screen, true);
}
return true;
}
@@ -937,9 +899,15 @@ sc_screen_convert_window_to_frame_coords(struct sc_screen *screen,
void
sc_screen_hidpi_scale_coords(struct sc_screen *screen, int32_t *x, int32_t *y) {
// take the HiDPI scaling (dw/ww and dh/wh) into account
int ww, wh, dw, dh;
SDL_GetWindowSize(screen->window, &ww, &wh);
SDL_GL_GetDrawableSize(screen->window, &dw, &dh);
struct sc_size window_size = sc_sdl_get_window_size(screen->window);
int64_t ww = window_size.width;
int64_t wh = window_size.height;
struct sc_size drawable_size =
sc_sdl_get_window_size_in_pixels(screen->window);
int64_t dw = drawable_size.width;
int64_t dh = drawable_size.height;
// scale for HiDPI (64 bits for intermediate multiplications)
*x = (int64_t) *x * dw / ww;

View File

@@ -1,11 +1,14 @@
#ifndef SCREEN_H
#define SCREEN_H
#ifndef SC_SCREEN_H
#define SC_SCREEN_H
#include "common.h"
#include <stdbool.h>
#include <SDL2/SDL.h>
#include <libavformat/avformat.h>
#include <stdint.h>
#include <SDL3/SDL.h>
#include <libavcodec/avcodec.h>
#include <libavutil/frame.h>
#include <libavutil/pixfmt.h>
#include "controller.h"
#include "coords.h"
@@ -14,7 +17,6 @@
#include "frame_buffer.h"
#include "input_manager.h"
#include "mouse_capture.h"
#include "opengl.h"
#include "options.h"
#include "trait/key_processor.h"
#include "trait/frame_sink.h"
@@ -28,6 +30,7 @@ struct sc_screen {
#endif
bool video;
bool camera;
struct sc_display display;
struct sc_input_manager im;
@@ -59,6 +62,7 @@ struct sc_screen {
// rectangle of the content (excluding black borders)
struct SDL_Rect rect;
bool has_frame;
bool has_video_window;
bool fullscreen;
bool maximized;
bool minimized;
@@ -71,6 +75,7 @@ struct sc_screen {
struct sc_screen_params {
bool video;
bool camera;
struct sc_controller *controller;
struct sc_file_pusher *fp;

View File

@@ -1,19 +1,18 @@
#include "server.h"
#include <assert.h>
#include <errno.h>
#include <inttypes.h>
#include <stdio.h>
#include <SDL2/SDL_timer.h>
#include <SDL2/SDL_platform.h>
#include <stdlib.h>
#include <string.h>
#include <sys/types.h>
#include "adb/adb.h"
#include "util/binary.h"
#include "util/env.h"
#include "util/file.h"
#include "util/log.h"
#include "util/net_intr.h"
#include "util/process_intr.h"
#include "util/process.h"
#include "util/str.h"
#define SC_SERVER_FILENAME "scrcpy-server"
@@ -150,12 +149,43 @@ sc_server_get_audio_source_name(enum sc_audio_source audio_source) {
return "mic";
case SC_AUDIO_SOURCE_PLAYBACK:
return "playback";
case SC_AUDIO_SOURCE_MIC_UNPROCESSED:
return "mic-unprocessed";
case SC_AUDIO_SOURCE_MIC_CAMCORDER:
return "mic-camcorder";
case SC_AUDIO_SOURCE_MIC_VOICE_RECOGNITION:
return "mic-voice-recognition";
case SC_AUDIO_SOURCE_MIC_VOICE_COMMUNICATION:
return "mic-voice-communication";
case SC_AUDIO_SOURCE_VOICE_CALL:
return "voice-call";
case SC_AUDIO_SOURCE_VOICE_CALL_UPLINK:
return "voice-call-uplink";
case SC_AUDIO_SOURCE_VOICE_CALL_DOWNLINK:
return "voice-call-downlink";
case SC_AUDIO_SOURCE_VOICE_PERFORMANCE:
return "voice-performance";
default:
assert(!"unexpected audio source");
return NULL;
}
}
static const char *
sc_server_get_display_ime_policy_name(enum sc_display_ime_policy policy) {
switch (policy) {
case SC_DISPLAY_IME_POLICY_LOCAL:
return "local";
case SC_DISPLAY_IME_POLICY_FALLBACK:
return "fallback";
case SC_DISPLAY_IME_POLICY_HIDE:
return "hide";
default:
assert(!"unexpected display IME policy");
return NULL;
}
}
static bool
validate_string(const char *s) {
// The parameters values are passed as command line arguments to adb, so
@@ -327,6 +357,9 @@ execute_server(struct sc_server *server,
if (params->camera_high_speed) {
ADD_PARAM("camera_high_speed=true");
}
if (params->camera_torch) {
ADD_PARAM("camera_torch=true");
}
if (params->show_touches) {
ADD_PARAM("show_touches=true");
}
@@ -377,6 +410,13 @@ execute_server(struct sc_server *server,
VALIDATE_STRING(params->new_display);
ADD_PARAM("new_display=%s", params->new_display);
}
if (params->display_ime_policy != SC_DISPLAY_IME_POLICY_UNDEFINED) {
ADD_PARAM("display_ime_policy=%s",
sc_server_get_display_ime_policy_name(params->display_ime_policy));
}
if (!params->vd_destroy_content) {
ADD_PARAM("vd_destroy_content=false");
}
if (!params->vd_system_decorations) {
ADD_PARAM("vd_system_decorations=false");
}
@@ -829,11 +869,14 @@ sc_server_switch_to_tcpip(struct sc_server *server, const char *serial) {
}
static bool
sc_server_connect_to_tcpip(struct sc_server *server, const char *ip_port) {
sc_server_connect_to_tcpip(struct sc_server *server, const char *ip_port,
bool disconnect) {
struct sc_intr *intr = &server->intr;
// Error expected if not connected, do not report any error
sc_adb_disconnect(intr, ip_port, SC_ADB_SILENT);
if (disconnect) {
// Error expected if not connected, do not report any error
sc_adb_disconnect(intr, ip_port, SC_ADB_SILENT);
}
LOGI("Connecting to %s...", ip_port);
@@ -849,7 +892,7 @@ sc_server_connect_to_tcpip(struct sc_server *server, const char *ip_port) {
static bool
sc_server_configure_tcpip_known_address(struct sc_server *server,
const char *addr) {
const char *addr, bool disconnect) {
// Append ":5555" if no port is present
bool contains_port = strchr(addr, ':');
char *ip_port = contains_port ? strdup(addr)
@@ -860,7 +903,7 @@ sc_server_configure_tcpip_known_address(struct sc_server *server,
}
server->serial = ip_port;
return sc_server_connect_to_tcpip(server, ip_port);
return sc_server_connect_to_tcpip(server, ip_port, disconnect);
}
static bool
@@ -885,7 +928,7 @@ sc_server_configure_tcpip_unknown_address(struct sc_server *server,
}
server->serial = ip_port;
return sc_server_connect_to_tcpip(server, ip_port);
return sc_server_connect_to_tcpip(server, ip_port, false);
}
static void
@@ -972,7 +1015,13 @@ run_server(void *data) {
sc_adb_device_destroy(&device);
}
} else {
ok = sc_server_configure_tcpip_known_address(server, params->tcpip_dst);
// If the user passed a '+' (--tcpip=+ip), then disconnect first
const char *tcpip_dst = params->tcpip_dst;
bool plus = tcpip_dst[0] == '+';
if (plus) {
++tcpip_dst;
}
ok = sc_server_configure_tcpip_known_address(server, tcpip_dst, plus);
if (!ok) {
goto error_connection_failed;
}

View File

@@ -1,19 +1,17 @@
#ifndef SERVER_H
#define SERVER_H
#ifndef SC_SERVER_H
#define SC_SERVER_H
#include "common.h"
#include <stdatomic.h>
#include <stdbool.h>
#include <stdint.h>
#include "adb/adb_tunnel.h"
#include "coords.h"
#include "options.h"
#include "util/intr.h"
#include "util/log.h"
#include "util/net.h"
#include "util/thread.h"
#include "util/tick.h"
#define SC_DEVICE_NAME_FIELD_LENGTH 64
struct sc_server_info {
@@ -52,6 +50,7 @@ struct sc_server_params {
bool control;
uint32_t display_id;
const char *new_display;
enum sc_display_ime_policy display_ime_policy;
bool video;
bool audio;
bool audio_dup;
@@ -69,6 +68,8 @@ struct sc_server_params {
bool power_on;
bool kill_adb_on_close;
bool camera_high_speed;
bool camera_torch;
bool vd_destroy_content;
bool vd_system_decorations;
uint8_t list;
};

View File

@@ -3,13 +3,14 @@
#include "common.h"
#include <assert.h>
#include <stdbool.h>
#include <stdint.h>
#include <SDL2/SDL_keycode.h>
#include <SDL3/SDL_keycode.h>
#include "options.h"
#define SC_SDL_SHORTCUT_MODS_MASK (KMOD_CTRL | KMOD_ALT | KMOD_GUI)
#define SC_SDL_SHORTCUT_MODS_MASK (SDL_KMOD_CTRL | SDL_KMOD_ALT | SDL_KMOD_GUI)
// input: OR of enum sc_shortcut_mod
// output: OR of SDL_Keymod
@@ -17,22 +18,22 @@ static inline uint16_t
sc_shortcut_mods_to_sdl(uint8_t shortcut_mods) {
uint16_t sdl_mod = 0;
if (shortcut_mods & SC_SHORTCUT_MOD_LCTRL) {
sdl_mod |= KMOD_LCTRL;
sdl_mod |= SDL_KMOD_LCTRL;
}
if (shortcut_mods & SC_SHORTCUT_MOD_RCTRL) {
sdl_mod |= KMOD_RCTRL;
sdl_mod |= SDL_KMOD_RCTRL;
}
if (shortcut_mods & SC_SHORTCUT_MOD_LALT) {
sdl_mod |= KMOD_LALT;
sdl_mod |= SDL_KMOD_LALT;
}
if (shortcut_mods & SC_SHORTCUT_MOD_RALT) {
sdl_mod |= KMOD_RALT;
sdl_mod |= SDL_KMOD_RALT;
}
if (shortcut_mods & SC_SHORTCUT_MOD_LSUPER) {
sdl_mod |= KMOD_LGUI;
sdl_mod |= SDL_KMOD_LGUI;
}
if (shortcut_mods & SC_SHORTCUT_MOD_RSUPER) {
sdl_mod |= KMOD_RGUI;
sdl_mod |= SDL_KMOD_RGUI;
}
return sdl_mod;
}
@@ -49,12 +50,12 @@ sc_shortcut_mods_is_shortcut_mod(uint16_t sdl_shortcut_mods, uint16_t sdl_mod) {
static inline bool
sc_shortcut_mods_is_shortcut_key(uint16_t sdl_shortcut_mods,
SDL_Keycode keycode) {
return (sdl_shortcut_mods & KMOD_LCTRL && keycode == SDLK_LCTRL)
|| (sdl_shortcut_mods & KMOD_RCTRL && keycode == SDLK_RCTRL)
|| (sdl_shortcut_mods & KMOD_LALT && keycode == SDLK_LALT)
|| (sdl_shortcut_mods & KMOD_RALT && keycode == SDLK_RALT)
|| (sdl_shortcut_mods & KMOD_LGUI && keycode == SDLK_LGUI)
|| (sdl_shortcut_mods & KMOD_RGUI && keycode == SDLK_RGUI);
return (sdl_shortcut_mods & SDL_KMOD_LCTRL && keycode == SDLK_LCTRL)
|| (sdl_shortcut_mods & SDL_KMOD_RCTRL && keycode == SDLK_RCTRL)
|| (sdl_shortcut_mods & SDL_KMOD_LALT && keycode == SDLK_LALT)
|| (sdl_shortcut_mods & SDL_KMOD_RALT && keycode == SDLK_RALT)
|| (sdl_shortcut_mods & SDL_KMOD_LGUI && keycode == SDLK_LGUI)
|| (sdl_shortcut_mods & SDL_KMOD_RGUI && keycode == SDLK_RGUI);
}
#endif

View File

@@ -1,10 +1,11 @@
#include "util/file.h"
#include <limits.h>
#include <stdlib.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>
#ifdef __APPLE__
# include <mach-o/dyld.h> // for _NSGetExecutablePath()

View File

@@ -4,6 +4,8 @@
#include <errno.h>
#include <fcntl.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/wait.h>
#include <unistd.h>

View File

@@ -3,10 +3,11 @@
#include "common.h"
#include <assert.h>
#include <stdbool.h>
#include <libavcodec/avcodec.h>
#include "trait/packet_sink.h"
/**
* Frame sink trait.
*
@@ -18,9 +19,16 @@ struct sc_frame_sink {
struct sc_frame_sink_ops {
/* The codec context is valid until the sink is closed */
bool (*open)(struct sc_frame_sink *sink, const AVCodecContext *ctx);
bool (*open)(struct sc_frame_sink *sink, const AVCodecContext *ctx,
const struct sc_stream_session *session);
void (*close)(struct sc_frame_sink *sink);
bool (*push)(struct sc_frame_sink *sink, const AVFrame *frame);
/**
* Optional callback to be notified of a new stream session.
*/
bool (*push_session)(struct sc_frame_sink *sink,
const struct sc_stream_session *session);
};
#endif

View File

@@ -1,5 +1,7 @@
#include "frame_source.h"
#include <assert.h>
void
sc_frame_source_init(struct sc_frame_source *source) {
source->sink_count = 0;
@@ -25,11 +27,12 @@ sc_frame_source_sinks_close_firsts(struct sc_frame_source *source,
bool
sc_frame_source_sinks_open(struct sc_frame_source *source,
const AVCodecContext *ctx) {
const AVCodecContext *ctx,
const struct sc_stream_session *session) {
assert(source->sink_count);
for (unsigned i = 0; i < source->sink_count; ++i) {
struct sc_frame_sink *sink = source->sinks[i];
if (!sink->ops->open(sink, ctx)) {
if (!sink->ops->open(sink, ctx, session)) {
sc_frame_source_sinks_close_firsts(source, i);
return false;
}
@@ -57,3 +60,18 @@ sc_frame_source_sinks_push(struct sc_frame_source *source,
return true;
}
bool
sc_frame_source_sinks_push_session(struct sc_frame_source *source,
const struct sc_stream_session *session) {
assert(source->sink_count);
for (unsigned i = 0; i < source->sink_count; ++i) {
struct sc_frame_sink *sink = source->sinks[i];
if (sink->ops->push_session &&
!sink->ops->push_session(sink, session)) {
return false;
}
}
return true;
}

View File

@@ -3,7 +3,9 @@
#include "common.h"
#include "frame_sink.h"
#include <stdbool.h>
#include "trait/frame_sink.h"
#define SC_FRAME_SOURCE_MAX_SINKS 2
@@ -26,7 +28,8 @@ sc_frame_source_add_sink(struct sc_frame_source *source,
bool
sc_frame_source_sinks_open(struct sc_frame_source *source,
const AVCodecContext *ctx);
const AVCodecContext *ctx,
const struct sc_stream_session *session);
void
sc_frame_source_sinks_close(struct sc_frame_source *source);
@@ -35,4 +38,8 @@ bool
sc_frame_source_sinks_push(struct sc_frame_source *source,
const AVFrame *frame);
bool
sc_frame_source_sinks_push_session(struct sc_frame_source *source,
const struct sc_stream_session *session);
#endif

View File

@@ -3,9 +3,6 @@
#include "common.h"
#include <assert.h>
#include <stdbool.h>
#include "input_events.h"
/**
@@ -20,13 +17,22 @@ struct sc_gamepad_processor {
struct sc_gamepad_processor_ops {
/**
* Process a gamepad device added or removed
* Process a gamepad device added event
*
* This function is mandatory.
*/
void
(*process_gamepad_device)(struct sc_gamepad_processor *gp,
const struct sc_gamepad_device_event *event);
(*process_gamepad_added)(struct sc_gamepad_processor *gp,
const struct sc_gamepad_device_event *event);
/**
* Process a gamepad device removed event
*
* This function is mandatory.
*/
void
(*process_gamepad_removed)(struct sc_gamepad_processor *gp,
const struct sc_gamepad_device_event *event);
/**
* Process a gamepad axis event

View File

@@ -3,7 +3,6 @@
#include "common.h"
#include <assert.h>
#include <stdbool.h>
#include "input_events.h"

View File

@@ -3,7 +3,6 @@
#include "common.h"
#include <assert.h>
#include <stdbool.h>
#include "input_events.h"

View File

@@ -3,7 +3,6 @@
#include "common.h"
#include <assert.h>
#include <stdbool.h>
#include <libavcodec/avcodec.h>
@@ -16,12 +15,28 @@ struct sc_packet_sink {
const struct sc_packet_sink_ops *ops;
};
struct sc_stream_session_video {
uint32_t width;
uint32_t height;
};
struct sc_stream_session {
struct sc_stream_session_video video;
};
struct sc_packet_sink_ops {
/* The codec context is valid until the sink is closed */
bool (*open)(struct sc_packet_sink *sink, AVCodecContext *ctx);
bool (*open)(struct sc_packet_sink *sink, AVCodecContext *ctx,
const struct sc_stream_session *session);
void (*close)(struct sc_packet_sink *sink);
bool (*push)(struct sc_packet_sink *sink, const AVPacket *packet);
/**
* Optional callback to be notified of a new stream session.
*/
bool (*push_session)(struct sc_packet_sink *sink,
const struct sc_stream_session *session);
/*/
* Called when the input stream has been disabled at runtime.
*

View File

@@ -1,5 +1,7 @@
#include "packet_source.h"
#include <assert.h>
void
sc_packet_source_init(struct sc_packet_source *source) {
source->sink_count = 0;
@@ -25,11 +27,12 @@ sc_packet_source_sinks_close_firsts(struct sc_packet_source *source,
bool
sc_packet_source_sinks_open(struct sc_packet_source *source,
AVCodecContext *ctx) {
AVCodecContext *ctx,
const struct sc_stream_session *session) {
assert(source->sink_count);
for (unsigned i = 0; i < source->sink_count; ++i) {
struct sc_packet_sink *sink = source->sinks[i];
if (!sink->ops->open(sink, ctx)) {
if (!sink->ops->open(sink, ctx, session)) {
sc_packet_source_sinks_close_firsts(source, i);
return false;
}
@@ -58,6 +61,20 @@ sc_packet_source_sinks_push(struct sc_packet_source *source,
return true;
}
bool
sc_packet_source_sinks_push_session(struct sc_packet_source *source,
const struct sc_stream_session *session) {
assert(source->sink_count);
for (unsigned i = 0; i < source->sink_count; ++i) {
struct sc_packet_sink *sink = source->sinks[i];
if (!sink->ops->push_session(sink, session)) {
return false;
}
}
return true;
}
void
sc_packet_source_sinks_disable(struct sc_packet_source *source) {
assert(source->sink_count);

View File

@@ -3,7 +3,9 @@
#include "common.h"
#include "packet_sink.h"
#include <stdbool.h>
#include "trait/packet_sink.h"
#define SC_PACKET_SOURCE_MAX_SINKS 2
@@ -26,7 +28,8 @@ sc_packet_source_add_sink(struct sc_packet_source *source,
bool
sc_packet_source_sinks_open(struct sc_packet_source *source,
AVCodecContext *ctx);
AVCodecContext *ctx,
const struct sc_stream_session *session);
void
sc_packet_source_sinks_close(struct sc_packet_source *source);
@@ -35,6 +38,10 @@ bool
sc_packet_source_sinks_push(struct sc_packet_source *source,
const AVPacket *packet);
bool
sc_packet_source_sinks_push_session(struct sc_packet_source *source,
const struct sc_stream_session *session);
void
sc_packet_source_sinks_disable(struct sc_packet_source *source);

View File

@@ -1,5 +1,10 @@
#include "gamepad_uhid.h"
#include <assert.h>
#include <inttypes.h>
#include <string.h>
#include <SDL3/SDL_gamepad.h>
#include "hid/hid_gamepad.h"
#include "input_events.h"
#include "util/log.h"
@@ -7,6 +12,11 @@
/** Downcast gamepad processor to sc_gamepad_uhid */
#define DOWNCAST(GP) container_of(GP, struct sc_gamepad_uhid, gamepad_processor)
// Xbox 360
#define SC_GAMEPAD_UHID_VENDOR_ID UINT16_C(0x045e)
#define SC_GAMEPAD_UHID_PRODUCT_ID UINT16_C(0x028e)
#define SC_GAMEPAD_UHID_NAME "Microsoft X-Box 360 Pad"
static void
sc_gamepad_uhid_send_input(struct sc_gamepad_uhid *gamepad,
const struct sc_hid_input *hid_input,
@@ -30,7 +40,9 @@ sc_gamepad_uhid_send_open(struct sc_gamepad_uhid *gamepad,
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_UHID_CREATE;
msg.uhid_create.id = hid_open->hid_id;
msg.uhid_create.name = hid_open->name;
msg.uhid_create.vendor_id = SC_GAMEPAD_UHID_VENDOR_ID;
msg.uhid_create.product_id = SC_GAMEPAD_UHID_PRODUCT_ID;
msg.uhid_create.name = SC_GAMEPAD_UHID_NAME;
msg.uhid_create.report_desc = hid_open->report_desc;
msg.uhid_create.report_desc_size = hid_open->report_desc_size;
@@ -52,29 +64,39 @@ sc_gamepad_uhid_send_close(struct sc_gamepad_uhid *gamepad,
}
static void
sc_gamepad_processor_process_gamepad_device(struct sc_gamepad_processor *gp,
sc_gamepad_processor_process_gamepad_added(struct sc_gamepad_processor *gp,
const struct sc_gamepad_device_event *event) {
struct sc_gamepad_uhid *gamepad = DOWNCAST(gp);
if (event->type == SC_GAMEPAD_DEVICE_ADDED) {
struct sc_hid_open hid_open;
if (!sc_hid_gamepad_generate_open(&gamepad->hid, &hid_open,
event->gamepad_id)) {
return;
}
sc_gamepad_uhid_send_open(gamepad, &hid_open);
} else {
assert(event->type == SC_GAMEPAD_DEVICE_REMOVED);
struct sc_hid_close hid_close;
if (!sc_hid_gamepad_generate_close(&gamepad->hid, &hid_close,
event->gamepad_id)) {
return;
}
sc_gamepad_uhid_send_close(gamepad, &hid_close);
struct sc_hid_open hid_open;
if (!sc_hid_gamepad_generate_open(&gamepad->hid, &hid_open,
event->gamepad_id)) {
return;
}
SDL_Gamepad * game_controller =
SDL_GetGamepadFromID(event->gamepad_id);
assert(game_controller);
const char *name = SDL_GetGamepadName(game_controller);
LOGI("Gamepad added: [%" PRIu32 "] %s", event->gamepad_id, name);
sc_gamepad_uhid_send_open(gamepad, &hid_open);
}
static void
sc_gamepad_processor_process_gamepad_removed(struct sc_gamepad_processor *gp,
const struct sc_gamepad_device_event *event) {
struct sc_gamepad_uhid *gamepad = DOWNCAST(gp);
struct sc_hid_close hid_close;
if (!sc_hid_gamepad_generate_close(&gamepad->hid, &hid_close,
event->gamepad_id)) {
return;
}
LOGI("Gamepad removed: [%" PRIu32 "]", event->gamepad_id);
sc_gamepad_uhid_send_close(gamepad, &hid_close);
}
static void
@@ -114,7 +136,8 @@ sc_gamepad_uhid_init(struct sc_gamepad_uhid *gamepad,
gamepad->controller = controller;
static const struct sc_gamepad_processor_ops ops = {
.process_gamepad_device = sc_gamepad_processor_process_gamepad_device,
.process_gamepad_added = sc_gamepad_processor_process_gamepad_added,
.process_gamepad_removed = sc_gamepad_processor_process_gamepad_removed,
.process_gamepad_axis = sc_gamepad_processor_process_gamepad_axis,
.process_gamepad_button = sc_gamepad_processor_process_gamepad_button,
};

View File

@@ -3,8 +3,6 @@
#include "common.h"
#include <stdbool.h>
#include "controller.h"
#include "hid/hid_gamepad.h"
#include "trait/gamepad_processor.h"

View File

@@ -1,6 +1,12 @@
#include "keyboard_uhid.h"
#include <assert.h>
#include <string.h>
#include <SDL3/SDL_keyboard.h>
#include <SDL3/SDL_keycode.h>
#include "util/log.h"
#include "util/thread.h"
/** Downcast key processor to keyboard_uhid */
#define DOWNCAST(KP) container_of(KP, struct sc_keyboard_uhid, key_processor)
@@ -141,7 +147,9 @@ sc_keyboard_uhid_init(struct sc_keyboard_uhid *kb,
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_UHID_CREATE;
msg.uhid_create.id = SC_HID_ID_KEYBOARD;
msg.uhid_create.name = hid_open.name;
msg.uhid_create.vendor_id = 0;
msg.uhid_create.product_id = 0;
msg.uhid_create.name = NULL;
msg.uhid_create.report_desc = hid_open.report_desc;
msg.uhid_create.report_desc_size = hid_open.report_desc_size;
if (!sc_controller_push_msg(controller, &msg)) {

View File

@@ -1,5 +1,8 @@
#include "mouse_uhid.h"
#include <assert.h>
#include <string.h>
#include "hid/hid_mouse.h"
#include "input_events.h"
#include "util/log.h"
@@ -52,7 +55,10 @@ sc_mouse_processor_process_mouse_scroll(struct sc_mouse_processor *mp,
struct sc_mouse_uhid *mouse = DOWNCAST(mp);
struct sc_hid_input hid_input;
sc_hid_mouse_generate_input_from_scroll(&hid_input, event);
if (!sc_hid_mouse_generate_input_from_scroll(&mouse->hid, &hid_input,
event)) {
return;
}
sc_mouse_uhid_send_input(mouse, &hid_input, "mouse scroll");
}
@@ -60,6 +66,8 @@ sc_mouse_processor_process_mouse_scroll(struct sc_mouse_processor *mp,
bool
sc_mouse_uhid_init(struct sc_mouse_uhid *mouse,
struct sc_controller *controller) {
sc_hid_mouse_init(&mouse->hid);
mouse->controller = controller;
static const struct sc_mouse_processor_ops ops = {
@@ -81,7 +89,9 @@ sc_mouse_uhid_init(struct sc_mouse_uhid *mouse,
struct sc_control_msg msg;
msg.type = SC_CONTROL_MSG_TYPE_UHID_CREATE;
msg.uhid_create.id = SC_HID_ID_MOUSE;
msg.uhid_create.name = hid_open.name;
msg.uhid_create.vendor_id = 0;
msg.uhid_create.product_id = 0;
msg.uhid_create.name = NULL;
msg.uhid_create.report_desc = hid_open.report_desc;
msg.uhid_create.report_desc_size = hid_open.report_desc_size;
if (!sc_controller_push_msg(controller, &msg)) {

View File

@@ -4,11 +4,13 @@
#include <stdbool.h>
#include "controller.h"
#include "hid/hid_mouse.h"
#include "trait/mouse_processor.h"
struct sc_mouse_uhid {
struct sc_mouse_processor mouse_processor; // mouse processor trait
struct sc_hid_mouse hid;
struct sc_controller *controller;
};

View File

@@ -1,6 +1,5 @@
#include "uhid_output.h"
#include <assert.h>
#include <inttypes.h>
#include "uhid/keyboard_uhid.h"

View File

@@ -3,7 +3,7 @@
#include "common.h"
#include <stdbool.h>
#include <stddef.h>
#include <stdint.h>
/**

Some files were not shown because too many files have changed in this diff Show More