Add missing kernel configs to avoid `make oldconfig` asks or
takes the default value for the missing configs.
fixes#623
Signed-off-by: Julio Montes <julio.montes@intel.com>
we need to do patch and config update for v4.19.52 on AArch64.
The config file adds a few configs involved with memory hot-plug
support.
Fixes: #591
Depends-on: github.com/kata-containers/runtime#1817
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
Correct typos and resolve formatting issues including incorrect heading
levels and missing TOC entries.
Fixes: #541.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
As shpchp used for pci hotplug on arm64 initialized
its bottom half work as a delay work for 5 seconds, pci bus
rescan triggered between up half and bottom half of shpc interrupt
handling will fail. so disable shpc and let bus rescan
to do the device hotplug on arm64.
Fixes: #498
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
We modified the kernel subdir, even thought it was only a doc
change, so we need to bump the config ver to reflect that.
Signed-off-by: Graham Whaley <graham.whaley@intel.com>
This patches adds virtio-fs capability to the kata kernel along with
config changes to enable the same on kata by default. The system will
only be exercised when `shared_fs` is set to `virtio-fs` in the kata
configuration file. the default still remains to be 9p
Fixes: #387
Depends-on: github.com/kata-containers/runtime#1016
Signed-off-by: Ganesh Maharaj Mahalingam <ganesh.mahalingam@intel.com>
All instances of the deprecated `arch` command are now replaced with `uname -m`.
Bumps kernel/kata_config_version to 34.
Fixes: #423
Signed-off-by: Rasmus Moorats <me@neonsea.uk>
This patch is update version for [1] as kernel
upgrad to v4.19.
It derives from [2] which has accept by kernel
community after v4.20. Modifacation has been done
to make it be able to enable memory hotplug using
probe method as it originally aims to using acpi.
Also some corresponding configurations in kernel
config are opened.
[1] https://github.com/kata-containers/packaging/
commit/e654dbd8367371c1b34776445a402d3c90f0dc66
[2] https://git.kernel.org/pub/scm/linux/kernel/
git/torvalds/linux.git/commit/
?id=4ab215061554ae2a4b78744a5dd3b3c6639f16a7
Change-Id: I305435f1d7e38d5cfcee22799792d1f4b0f015f8
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Jira: ENTOS-899
Unless we run kata VM as a hypervisor, we may need
CONFIG_S390_HYPFS_FS and CONFIG_SYS_HYPERVISOR.
CONFIG_S390_VMUR is for z/VM hypvervisor.
Remove CONFIG_ZSWAP and its dependencies to match other arches.
Fixes: #421
Signed-off-by: Tuan Hoang <tmhoang@linux.ibm.com>
let's open nvdimm-related kernel config parameters on arm64, such as
CONFIG_ACPI_NFIT, etc. and we also need to backport patch
'kvm:arm64:Dynamic IPA and 52bit IPA'(https://patchwork.kernel.org/cover/10616271/)
and related dependency into v4.19.X to fully support nvdimm from guest kernel.
Former patch has already been merged into v4.20.X.
Fixes: #376
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
enable ZONE_DEVICE config to support map pages, pmem_should_map_pages()
function fails if this config is not enabled.
fixes#378
Signed-off-by: Julio Montes <julio.montes@intel.com
This will add missing config option (DRM_FBDEV_LEAK_PHYS_SMEM) that are
being asked while running the installation script for kata kernel. Also,
this jumps to the current kernel version that is being used at the runtime.
Fixes#372
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
`build-kernel_test.sh` builds the kernel when there are changes
of it in a PR and then runs the whole CI tests. Now we are running
all CI tests on all changes[1] (not only when there is a kernel change).
This is making the CI to run all tests twice when there is a change
in the kernel, so we need to remove the script.
[1] https://github.com/kata-containers/packaging/pull/348Fixes: #380.
Signed-off-by: Salvador Fuentes <salvador.fuentes@intel.com>
Add CONFIG_CFS_BANDWIDTH so CPU hotplug feature works on s390x. Note
that CPU hot-unplug does not work yet due to limitations in qemu s390x.
Fixes#360
Signed-off-by: Tuan Hoang <tmhoang@linux.vnet.ibm.com>
We want to make sure Kata runs on latest stable kernels so that it
benefits from the latest features.
Fixes: #358
Signed-off-by: Nitesh Konkar <niteshkonkar@in.ibm.com>
we add the rough kernel config v4.19.23 for arm64, here we let
'make oldconfig'(setting default) to do the transformation from
v4.14.X to v4.19.X.
Fixes: #337
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
We want to make sure Kata runs on latest stable kernels so that it
benefits from the latest features.
For instance, in case of Kata relying on NEMU hypervisor, the recent
kernel patches reworking the way timer calibration is handled are
solving some boot latency issues.
Fixes#287
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
The s390_kata_kvm_4.14.x configs have been obtained by applying the patch
serial-forbid-8250-on-s390 and the combination:
make defconfig kvmconfig localyesconfig
Fixes: #246
Signed-off-by: Alice Frosi <afrosi@de.ibm.com>
Without Real time clock the date could not work properly for Arm64.
fixes: #238
Change-Id: I5834a5e90dc648cc9599c50f259d5ae273052a39
Signed-off-by: Wei Chen <wei.chen@arm.com>
As discussed in issue #171 IPv6-in-IPv4 tunnel is useless in guest. So we
decide to disable the CONFIG_IPV6_SIT by default for Arm64.
Fixed#230
Signed-off-by: Wei Chen <wei.chen@arm.com>
As x86_64 has updated the guest kernel to enable EFI support for NEMU,
because OVMF that is used by NEMU is an EFI firmware. Although the
NEMU is not ready for Arm64, we'd better to enable EFI support in
kernel to keep sync with x86_64.
Fixes#228
Signed-off-by: Wei Chen <wei.chen@arm.com>
This commit bumps the default config from 4.14.49 to 4.14.67 first,
and then enables the support for EFI firmware as OVMF used by NEMU
is an EFI firmware.
Fixes#220
Signed-off-by: Sebastien Boeuf <sebastien.boeuf@intel.com>
Add patch to enable evged, the config option cannot be set normally since it
breaks current kata supported machine types.
Fixes: #214
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
Fixes#144
Current kata containers can't run with kernel 4.1 built from current x86 config,
it will report error:
```
$ docker run -ti --runtime kata busybox sh
docker: Error response from daemon: oci runtime error: rpc error: code = Internal
desc = Could not run process: container_linux.go:348: starting container process
caused "process_linux.go:402: container init caused \"open /dev/ptmx: no such
file or directory\"".
```
This is caused by bogus devpts mount options. When run container with docker,
docker will assign a default devpts mount for every container which equals to
command below:
```
$ mount -t devpts -o nosuid,noexec,newinstance,ptmxmode=0666,mode=0620,gid=5 \
devpts /dev/pts
```
This requires kernel config `CONFIG_DEVPTS_MULTIPLE_INSTANCES=y` to work properly
under kernel-4.1, but this option is already removed from latest kernel.
It's better to add it back for support older kernel than current 4.14.
Signed-off-by: Wei Zhang <zhangwei555@huawei.com>
libcontainer limits the memory+swap usage by writing the limit at
/sys/fs/cgroup/memory/docker/$CONTID/memory.memsw.limit_in_bytes, this path
doesn't exist if CONFIG_MEMCG_SWAP and CONFIG_MEMCG_SWAP_ENABLED are not
enabled.
fixes#103
Signed-off-by: Julio Montes <julio.montes@intel.com>
Post Fix#111, the kernel config name is
expected is to be prefixed with powerpc instead
of ppc64le. Just rename the file to suit the scripts.
Fixes: #113
Signed-off-by: Nitesh Konkar niteshkonkar@in.ibm.com
Make sure kernel config version is validated on test.
Also, increse Kata Kernel config version.
Signed-off-by: Jose Carlos Venegas Munoz <jose.carlos.venegas.munoz@intel.com>
In order to track the changes that we add to the kernel, lets
add a kata_config_version file that should be bumped whenever
a change is added to the kernel directory
Fixes#43.
Signed-off-by: Salvador Fuentes <salvador.fuentes@intel.com>
