Merge pull request #117 from home-assistant/build

Add firmware / change running script for timings (#116)

bluetooth_bcm43xx/Dockerfile

@@ -4,16 +4,10 @@ FROM %%BASE_IMAGE%%
 ENV LANG C.UTF-8
 
 # Setup base
-RUN apk add --no-cache tzdata jq bluez git
+RUN apk add --no-cache tzdata jq bluez
 
-# Install firmware
-RUN git clone --depth 1 https://github.com/RPi-Distro/firmware-nonfree /tmp/firmware \
-    && mkdir -p /lib/firmware/brcm \
-    && cp -f /tmp/firmware/brcm80211/brcm/* /lib/firmware/brcm/ \
-    && rm -rf /tmp/firmware
-    
 # Copy firmware
-COPY BCM43430A1.hcd /lib/firmware/brcm/
+COPY firmware/* /lib/firmware/brcm/
 
 # Copy data
 COPY run.sh /

bluetooth_bcm43xx/config.json

@@ -1,6 +1,6 @@
 {
   "name": "Bluetooth BCM43xx",
-  "version": "0.5",
+  "version": "0.6",
   "slug": "bluetooth_bcm43xx",
   "description": "Activate bluetooth for bcm43xx",
   "url": "https://home-assistant.io/addons/Bluetooth_bcm43xx/",

bluetooth_bcm43xx/firmware/LICENCE.broadcom_bcm43xx

@@ -0,0 +1,65 @@
+SOFTWARE LICENSE AGREEMENT
+
+The accompanying software in binary code form (“Software”), is licensed to you,
+or, if you are accepting on behalf of an entity, the entity and its affiliates
+exercising rights hereunder (“Licensee”) subject to the terms of this software
+license agreement (“Agreement”), unless Licensee and Broadcom Corporation
+(“Broadcom”) execute a separate written software license agreement governing
+use of the Software. ANY USE, REPRODUCTION, OR DISTRIBUTION OF THE SOFTWARE
+CONSTITUTES LICENSEE’S ACCEPTANCE OF THIS AGREEMENT.
+
+1.	License. Subject to the terms and conditions of this Agreement,
+Broadcom hereby grants to Licensee a limited, non-exclusive, non-transferable,
+royalty-free license: (i) to use and integrate the Software with any other
+software; and (ii) to reproduce and distribute the Software complete,
+unmodified, and as provided by Broadcom, solely for use with Broadcom
+proprietary integrated circuit product(s) sold by Broadcom with which the
+Software was designed to be used, or their successors.
+
+2.	Restrictions. Licensee shall distribute Software with a copy of this
+Agreement. Licensee shall not remove, efface or obscure any copyright or
+trademark notices from the Software. Reproductions of the Broadcom copyright
+notice shall be included with each copy of the Software, except where such
+Software is embedded in a manner not readily accessible to the end user.
+Licensee shall not: (i) use, license, sell or otherwise distribute the Software
+except as provided in this Agreement; (ii) attempt to modify in any way,
+reverse engineer, decompile or disassemble any portion of the Software; or
+(iii) use the Software or other material in violation of any applicable law or
+regulation, including but not limited to any regulatory agency. This Agreement
+shall automatically terminate upon Licensee’s failure to comply with any of the
+terms of this Agreement. In such event, Licensee will destroy all copies of the
+Software and its component parts.
+
+3.	Ownership. The Software is licensed and not sold.  Title to and
+ownership of the Software, including all intellectual property rights thereto,
+and any portion thereof remain with Broadcom or its licensors. Licensee hereby
+covenants that it will not assert any claim that the Software created by or for
+Broadcom infringe any intellectual property right owned or controlled by
+Licensee.
+
+4.     	Disclaimer. THE SOFTWARE IS OFFERED “AS IS,” AND BROADCOM PROVIDES AND
+GRANTS AND LICENSEE RECEIVES NO SUPPORT AND NO WARRANTIES OF ANY KIND, EXPRESS
+OR IMPLIED, BY STATUTE, COMMUNICATION OR CONDUCT WITH LICENSEE, OR OTHERWISE.
+BROADCOM SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A SPECIFIC PURPOSE, OR NONINFRINGEMENT CONCERNING THE SOFTWARE OR
+ANY UPGRADES TO OR DOCUMENTATION FOR THE SOFTWARE. WITHOUT LIMITATION OF THE
+ABOVE, BROADCOM GRANTS NO WARRANTY THAT THE SOFTWARE IS ERROR-FREE OR WILL
+OPERATE WITHOUT INTERRUPTION, AND GRANTS NO WARRANTY REGARDING ITS USE OR THE
+RESULTS THEREFROM INCLUDING, WITHOUT LIMITATION, ITS CORRECTNESS, ACCURACY, OR
+RELIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT SHALL BROADCOM
+OR ANY OF ITS LICENSORS HAVE ANY LIABILITY FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND ON ANY THEORY
+OF LIABILITY, WHETHER FOR BREACH OF CONTRACT, TORT (INCLUDING NEGLIGENCE) OR
+OTHERWISE, ARISING OUT OF THIS AGREEMENT OR USE, REPRODUCTION, OR DISTRIBUTION
+OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO LOSS OF DATA AND LOSS OF PROFITS,
+EVEN IF SUCH PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THESE
+LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY
+LIMITED REMEDY.
+
+5. 	Export Laws.  LICENSEE UNDERSTANDS AND AGREES THAT THE SOFTWARE IS
+SUBJECT TO UNITED STATES AND OTHER APPLICABLE EXPORT-RELATED LAWS AND
+REGULATIONS AND THAT LICENSEE MAY NOT EXPORT, RE-EXPORT OR TRANSFER THE
+SOFTWARE OR ANY DIRECT PRODUCT OF THE SOFTWARE EXCEPT AS PERMITTED UNDER THOSE
+LAWS. WITHOUT LIMITING THE FOREGOING, EXPORT, RE-EXPORT, OR TRANSFER OF THE
+SOFTWARE TO CUBA, IRAN, NORTH KOREA, SUDAN, AND SYRIA IS PROHIBITED.
+

bluetooth_bcm43xx/firmware/brcmfmac43430-sdio.txt

@@ -0,0 +1,66 @@
+# NVRAM file for BCM943430WLPTH
+# 2.4 GHz, 20 MHz BW mode
+
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0727
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0727
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+boardflags3=0x08000000
+xtalfreq=37400
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=84
+txpwrbckof=6
+cckbw202gpo=0
+legofdmbw202gpo=0x66111111
+mcsbw202gpo=0x77711111
+propbw202gpo=0xdd
+
+# OFDM IIR :
+ofdmdigfilttype=18
+ofdmdigfilttypebe=18
+# PAPD mode:
+papdmode=1
+papdvalidtest=1
+pacalidx2g=42
+papdepsoffset=-22
+papdendidx=58
+
+# LTECX flags
+ltecxmux=0
+ltecxpadnum=0x0102
+ltecxfnsel=0x44
+ltecxgcigpio=0x01
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
+muxenab=0x1
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+
+#VCO freq 326.4MHz
+spurconfig=0x3 
+
+edonthd20l=-75
+edoffthd20ul=-80

bluetooth_bcm43xx/run.sh

@@ -1,9 +1,7 @@
 #!/bin/bash
 set -e
 
-hciattach -n /dev/ttyAMA0 bcm43xx 115200 noflow - &
-HCI_PID=$!
+hciattach /dev/ttyAMA0 bcm43xx 115200 noflow -
+hciconfig hci0 up
 
-hciconfig hci0 up || true
-
-wait $HCI_PID
+wait "$(pgrep hciattach)"