Users can specify extra arguments for virtiofsd in a pod spec using the
io.katacontainers.config.hypervisor.virtio_fs_extra_args annontation.
However, this annotation was ignored so far by the runtime. This commit
fixes the issue by processing the annotation value (if present) and
translating it to the corresponding hypervisor configuration item.
Fixes#1523
Signed-off-by: Pavel Mores <pmores@redhat.com>
It would be undesirable to be given an annotation like "/dev/null".
Filter out bad annotation values.
Fixes: #1043
Suggested-by: James O. D. Hunt <james.o.hunt@intel.com>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
For k8s emptyDir volume, a specific fsGroup would
be set for it, thus runtime should pass this fsGroup
for EphemeralStorage to guest and set it properly on
the emptyDir volume in guest.
Fixes: #1580
Signed-off-by: fupan.lfp <fupan.lfp@antfin.com>
Remove the prohibition of vhost-user devices on s390x, which are by now
supported (e.g. vhost-user-fs-ccw). As a consequence,
appendVhostUserDevice no longer needs an error in its signature.
This enables virtio-fs support on s390x.
Fixes: #1469
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Rather than relying on the system clock, use a channel timeout to avoid
problems if the system time changed.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Fixed logic used to handle static agent tracing.
For a standard (untraced) hypervisor shutdown, the runtime kills the VM
process once the workload has finished. But if static agent tracing is
enabled, the agent running inside the VM is responsible for the
shutdown. The existing code handled this scenario but did not wait for
the hypervisor process to end. The outcome of this being that the
console watcher thread was killed too early.
Although not a problem for an untraced system, if static agent tracing
was enabled, the logs from the hypervisor would be truncated, missing the
crucial final stages of the agents shutdown sequence.
The fix necessitated adding a new parameter to the `stopSandbox()` API,
which if true requests the runtime hypervisor logic simply to wait for
the hypervisor process to exit rather than killing it.
Fixes: #1696.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Previously, the hypervisors were sending a signal and then checking to
see if the process had died by sending the magic null signal (`0`). However,
that doesn't work as it was written: the logic was assuming sending the
null signal to a process that was dead would return `ESRCH`, but it
doesn't: you first need to you `wait(2)` for the process before sending
that signal. This means that previously, all affected hypervisors would
appear to take `timeout` seconds to end, even though they had _already_
finished.
Now, the hypervisors true end time will be seen as we wait for the
processes before sending the null signal to ensure the process has
finished.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Refactored some of the hypervisors to remove the duplicated code used to
trigger a shutdown.
Also added some unit tests.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Currently runtime and agent special case virtio-blk devices under clh,
ostensibly because the PCI address information is not available in that
case.
In fact, cloud-hypervisor's VmAddDiskPut API does return a PciDeviceInfo,
which includes a PCI address. That API is broken, because PCI addressing
depends on guest (firmware or OS) actions that the hypervisor won't know
about. clh only gets away with this because it only uses a single PCI root
and never uses PCI bridges, in which case the guest addresses are
accurately predictable: they always have domain and bus zero.
Until https://github.com/kata-containers/kata-containers/pull/1190, Kata
couldn't handle PCI addressing unless there was exactly one bridge, which
might be why this was actually special-cased for clh.
With #1190 merged, we can handle more general PCI paths, and we can derive
a trivial (one element) PCI path from the information that the clh API
gives us. We can use that to remove this special case.
fixes#1431
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
With tracing enabled, grpc health check generates a large number of
spans which creates too much data for tasks running longer than a few
minutes. To solve this, remove span creation from kata agent check() and
sendReq() where the majority of the spans come from. Leave contexts in
functions for subsequent calls that create spans.
Fixes#1395
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
The property name make newcomers confused when reading code.
Since in Kata Containers 2.0 there will only be one type of store,
so it's safe to replace it by `store` simply.
Fixes: #1660
Signed-off-by: bin <bin@hyper.sh>
On some setups, starting multiple kata pods (qemu) simultaneously on the same node
might cause kata VMs booting time to increase and the pods to fail with:
Failed to check if grpc server is working: rpc error: code = DeadlineExceeded desc = timed
out connecting to vsock 1358662990:1024: unknown
Increasing default dialing timeout to 30s should cover most cases.
Signed-off-by: Snir Sheriber <ssheribe@redhat.com>
Fixes: #1543
There are many requests to the agent that happen with relatively
high frequency when a workload is running (checkRequest, as an example).
Let's move from Debug to Trace to avoid bombarding journal.
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
For k8s emptyDir volume, a specific fsGroup would
be set for it, thus runtime should pass this fsGroup
to guest and set it properly on the emptyDir volume
in guest.
Fixes: #1580
Signed-off-by: fupan.lfp <fupan.lfp@antfin.com>
This patch extends the current process of generating client code for
cloud-hypervisor API with an additional step, `go-fmt`, which will remove
the generated `client/go.mod` file and format all auto-generated code.
Fixes: #1606
Signed-off-by: Bo Chen <chen.bo@intel.com>
Highlights for cloud-hypervisor version 0.14.0 include: 1) Structured
event monitoring; 2) MSHV improvements; 3) Improved aarch64 platform; 4)
Updated hotplug documentation; 6) PTY control for serial and
virtio-console; 7) Block device rate limiting; 8) Plan to deprecate the
support of "LinuxBoot" protocol and support PVH protocol only.
Highlights for cloud-hypervisor version 0.13.0 include: 1) Wider VFIO
device support; 2) Improve huge page support; 3) MACvTAP support; 4) VHD
disk image support; 5) Improved Virtio device threading; 6) Clean
shutdown support via synthetic power button.
Details can be found:
https://github.com/cloud-hypervisor/cloud-hypervisor/releases
Note: The client code of cloud-hypervisor's OpenAPI is automatically
generated by `openapi-generator` [1-2]. As the API changes do not
impact usages in Kata, no additional changes in kata's runtime are
needed to work with the latest version of cloud-hypervisor.
[1] https://github.com/OpenAPITools/openapi-generator
[2] https://github.com/kata-containers/kata-containers/blob/main/src/runtime/virtcontainers/pkg/cloud-hypervisor/README.mdFixes: #1591
Signed-off-by: Bo Chen <chen.bo@intel.com>
This patch upgrades Firecracker version from v0.21.1 to v0.23.1
* Generate swagger models for v0.23.1 (from firecracker.yaml)
* Change uint64 types in TokenBucket object according to rate-limiter
implementation (introduced in commit #cfeb966)
* Update Firecracker Logger/Metrics to support the new API
* Update payload in fc.vmRunning to support the new API
* Add Metrics type to fcConfig
Fixes: #1518
Signed-off-by: Orestis Lagkas Nikolos <olagkasn@nubificus.co.uk>
A wrong path was being used for container directory when
virtiofs is utilized. This resulted in a warning message in
logs when a container is killed, or completes:
level=warning msg="Could not remove container share dir"
Without proper removal, they'd later be cleaned up when the shared
path is removed as part of stopping the sandbox.
Fixes: #1559
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
#1389 has added a context for many signatures to improve trace spans.
Functions specific to s390x lack this. Add context where required. This
affects some common code signatures, since some functions that do not
require context on other architectures do require it on s390x.
Also remove an unnecessary import in test_qemu_s390x.go.
Fixes: #1562
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
`make test` depends mock hook in virtcontainers directory,
before test, install it first.
And also run test as normal user and root in GitHub actions.
Fixes: #1554
Signed-off-by: bin <bin@hyper.sh>
Right now we rely heavily on mount propagation to share host
files/directories to the guest. However, because virtiofsd
pivots and moves itself to a separate mount namespace, the remount
mount is not present in virtiofsd's mount. And it causes guest to be
able to write to the host RO volume.
To fix it, create a private RO mount and then move it to the host mounts
dir so that it will be present readonly in the host-guest shared dir.
Fixes: #1552
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
It turns out we have managed to break the static checker in many
difference places with the absence of static checker in github action.
Let's fix them while enabling static checker in github actions...
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
