When enabled, do not release in memory sandbox resources in VC APIs,
and callers are expected to call sandbox.Release() to release the in
memory resources.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
For each time a sandbox structure is created, we ensure s.Release()
is called. Then we can keep the qmp connection as long as Sandbox
pointer is alive.
All VC interfaces are still stateless as s.Release() is called before
each API returns.
OTOH, for VCSandbox APIs, FetchSandbox() must be paired with s.Release,
the same as before.
Fixes: #500
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Add SetFactory to allow virtcontainers consumers to set a vm factory.
And use it to create new VMs whenever the factory is set.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
There are a few changes we need on kata agent to introduce vm factory
support:
1. decouple agent creation from sandbox config
2. setup agent without creating a sandbox
3. expose vm storage path and share mount point
Signed-off-by: Peng Tao <bergwolf@gmail.com>
A hypervisor implementation does not need to depend on a sandbox
structure. Decouple them in preparation for vm factory.
Signed-off-by: Peng Tao <bergwolf@gmail.com>
After the sandbox is paused, it's needed to stop its monitor,
Otherwise, its monitors will receive timeout errors if it is
paused for a long time, thus its monitor will not tell it's a
crash caused timeout or just a paused timeout.
Fixes: #472
Signed-off-by: fupan <lifupan@gmail.com>
When do sandbox release, the kataBuiltInProxy will
be closed, and it will stop the watch of vm's console;
Thus it needs to restart the proxy to monitor the vm
console once to restore the sandbox.
Fixes: #441
Signed-off-by: fupan <lifupan@gmail.com>
So that we let callers decide if kata-agent should let all containers in
a sandbox share the same pid namespace.
This will be first used only by frakti. And kata cli can possibly use it
as well when cri-o and containerd-cri stop creating pause containers
and just pass the CreateSandbox CRI requests to kata.
Fixes: #426
Signed-off-by: Peng Tao <bergwolf@gmail.com>
We only need one qmp channel and it is qemu internal detail thus
sandbox.go does not need to be aware of it.
Fixes: #428
Signed-off-by: Peng Tao <bergwolf@gmail.com>
Before this patch shared dir will reamin when sandox
has already removed, espacilly for kata-agent mod.
Do clean up shared dirs after all mounts are umounted.
Fixes: #291
Signed-off-by: Haomin <caihaomin@huawei.com>
In case of physical network interfaces, we explicitly
pass through them to the VM. We need to bind them back to
the host driver when the sandbox is stopped, irrespective if
the network namespace has been created by virtcontainers or not.
Fixes#384
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
This commit checks the size of "/dev/shm" for the sandbox container
which is then used to create the shared memory inside the guest.
kata agent then uses this size to set up a sandbox level ephemeral
storage for shm. The containers then simply bind mount this sandbox level
shm.
With this, we will now be able to support docker --shm-size option
as well have a shared shm within containers in a pod, since they are
supposed to be in the same IPC namespace.
Fixes#356
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
k8s provides a configuration for sharing PID namespace
among containers. In case of crio and cri plugin, an infra
container is started first. All following containers are
supposed to share the pid namespace of this container.
In case a non-empty pid namespace path is provided for a container,
we check for the above condition while creating a container
and pass this out to the kata agent in the CreatContainer
request as SandboxPidNs flag. We clear out the PID namespaces
in the configuration passed to the kata agent.
Fixes#343
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Still there are some codes left which
will cause some misunderstanding
Change `p` in short of `pod` into `s` or `sandbox`
Fixes: #325
Signed-off-by: Haomin <caihaomin@huawei.com>
Events cli display container events such as cpu,
memory, and IO usage statistics.
By now OOM notifications and intel RDT are not fully supproted.
Fixes: #186
Signed-off-by: Haomin <caihaomin@huawei.com>
Don't fail if a new container with a CPU constraint was added to
a POD and no more vCPUs are available, instead apply the constraint
and let kernel balance the resources.
Signed-off-by: Julio Montes <julio.montes@intel.com>
Update command is used to update container's resources at run time.
All constraints are applied inside the VM to each container cgroup.
By now only CPU constraints are fully supported, vCPU are hot added
or removed depending of the new constraint.
fixes#189
Signed-off-by: Julio Montes <julio.montes@intel.com>
* Move makeNameID() func to virtcontainers/utils file as it's a generic
function for making name and ID.
* Move bindDevicetoVFIO() and bindDevicetoHost() to vfio driver package.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Fixes#50
This is done for decoupling device management part from other parts.
It seperate device.go to several dirs and files:
```
virtcontainers/device
├── api
│ └── interface.go
├── config
│ └── config.go
├── drivers
│ ├── block.go
│ ├── generic.go
│ ├── utils.go
│ ├── vfio.go
│ ├── vhost_user_blk.go
│ ├── vhost_user.go
│ ├── vhost_user_net.go
│ └── vhost_user_scsi.go
└── manager
├── manager.go
└── utils.go
```
* `api` contains interface definition of device management, so upper level caller
should import and use the interface, and lower level should implement the interface.
it's bridge to device drivers and callers.
* `config` contains structed exported data.
* `drivers` contains specific device drivers including block, vfio and vhost user
devices.
* `manager` exposes an external management package with a `DeviceManager`.
Signed-off-by: Zhang Wei <zhangwei555@huawei.com>
Store the PCI address of rootfs in case the rootfs is block
based and passed using virtio-block.
This helps up get rid of prdicting the device name inside the
container for the block device. The agent will determine the device
node name using the PCI address.
Fixes#266
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Introduce a new field in Drive to store the PCI address if the drive is
attached using virtio-blk.
Assign PCI address in the format bridge-addr/device-addr.
Since we need to assign the address while hotplugging, pass Drive
by address.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
Currently we sometimes pass it as a pointer and other times not. As
a result, the view of sandbox across virtcontainers may not be the same
and it costs extra memory copy each time we pass it by value. Fix it
by ensuring sandbox is always passed by pointers.
Fixes: #262
Signed-off-by: Peng Tao <bergwolf@gmail.com>
We currently just send the pid in the state. While OCI specifies
a few other fields as well, this commit just adds the bundle path
and the container id to the state. This should fix the errors seen
with hooks that rely on the bundle path.
Other fields like running "state" string have been left out. As this
would need sending the strings that OCI recognises. Hooks have been
implemented in virtcontainers and sending the state string would
require calling into OCI specific code in virtcontainers.
The bundle path again is OCI specific, but this can be accessed
using annotations. Hooks really need to be moved to the cli as they
are OCI specific. This however needs network hotplug to be implemented
first so that the hooks can be called from the cli after the
VM has been created.
Fixes#271
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
It disconnects the agent connection and removes the sandbox
from global sandbox list.
A new option `LongLiveConn` is also added to kata
agent's configuration. When set, the API caller is expected
to call sandbox.Release() to drop the agent connection explicitly.
`proxyBuiltIn` is moved out of agent state because we can always
retrieve it from sandbox config instead.
Fixes: #217
Signed-off-by: Peng Tao <bergwolf@gmail.com>
When imported, the vc files carried in the 'full style' apache
license text, but the standard for kata is to use SPDX style.
Update the relevant files to SPDX.
Fixes: #227
Signed-off-by: Graham whaley <graham.whaley@intel.com>
After we rename pod to sandbox, still there are some codes left which
will cause some misunderstanding.Such as,`p` in short of `pod` left in
`sandbox.go`.So we need to channge it into `s` in short of `sandbox`.
Fixes:#230
Related: #200
Signed-off-by: Haomin Tsai <caihaomin@huawei.com>
As agreed in [the kata containers API
design](https://github.com/kata-containers/documentation/blob/master/design/kata-api-design.md),
we need to rename pod notion to sandbox. The patch is a bit big but the
actual change is done through the script:
```
sed -i -e 's/pod/sandbox/g' -e 's/Pod/Sandbox/g' -e 's/POD/SB/g'
```
The only expections are `pod_sandbox` and `pod_container` annotations,
since we already pushed them to cri shims, we have to use them unchanged.
Fixes: #199
Signed-off-by: Peng Tao <bergwolf@gmail.com>
