This PR is to skip installing docker-compose-plugin while buiding a `build-kata-deploy` image for s390x|ppc64le.
It is a temporary solution to fix current CI failures for s390x regarding `hash sum mismatch`.
Fixes: #7848
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Pass --owner and --group to the tar invokation to prevent gihtub runner user
from leaking into release artifacts.
Fixes: #7832
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
Use AGENT_POLICY=yes when building the Guest images, and add a
permissive test policy to the k8s tests for:
- CBL-Mariner
- SEV
- SNP
- TDX
Also, add an example of policy rejecting ExecProcessRequest.
Fixes: #7667
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
The file can be removed between builds without causing any issue, and
leaving it around has been causing us some headache due to:
```
ERROR: open /home/runner/.docker/buildx/activity/default: permission denied
```
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The directory is a host path mount and cannot be removed from within the
container. What we actually want to remove is whatever is inside that
directory.
This may raise errors like:
```
rm: cannot remove '/opt/kata/': Device or resource busy
```
Fixes: #7746
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
docker install now creates a group with gid 999 which happens to match what we
need to get docker-in-docker to work. Remove the group first as we don't need
it.
Fixes: #7726
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
We can simply use `rm -f` all over the place and avoid the container
returning any error.
Fixes: #7733
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
When building with AGENT_POLICY=yes and AGENT_INIT=yes:
1. Include OPA and the Policy settings in rootfs.
2. Start OPA from the kata agent.
Before these changes, building with both AGENT_POLICY=yes and
AGENT_INIT=yes was unsupported.
Starting OPA from systemd (when AGENT_INIT=no) was already supported.
Fixes: #7615
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
The default `kata` runtime class would get created with the `kata`
handler instead of `kata-$KATA_HYPERVISOR`. This made Kata use the wrong
hypervisor and broke CI.
Fixes: #7663
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
Fixes: #7573
To enable this feature, build your rootfs using AGENT_POLICY=yes. The
default is AGENT_POLICY=no.
Building rootfs using AGENT_POLICY=yes has the following effects:
1. The kata-opa service gets included in the Guest image.
2. The agent gets built using AGENT_POLICY=yes.
After this patch, the shim calls SetPolicy if and only if a Policy
annotation is attached to the sandbox/pod. When creating a sandbox/pod
that doesn't have an attached Policy annotation:
1. If the agent was built using AGENT_POLICY=yes, the new sandbox uses
the default agent settings, that might include a default Policy too.
2. If the agent was built using AGENT_POLICY=no, the new sandbox is
executed the same way as before this patch.
Any SetPolicy calls from the shim to the agent fail if the agent was
built using AGENT_POLICY=no.
If the agent was built using AGENT_POLICY=yes:
1. The agent reads the contents of a default policy file during sandbox
start-up.
2. The agent then connects to the OPA service on localhost and sends
the default policy to OPA.
3. If the shim calls SetPolicy:
a. The agent checks if SetPolicy is allowed by the current
policy (the current policy is typically the default policy
mentioned above).
b. If SetPolicy is allowed, the agent deletes the current policy
from OPA and replaces it with the new policy it received from
the shim.
A typical new policy from the shim doesn't allow any future SetPolicy
calls.
4. For every agent rpc API call, the agent asks OPA if that call
should be allowed. OPA allows or not a call based on the current
policy, the name of the agent API, and the API call's inputs. The
agent rejects any calls that are rejected by OPA.
When building using AGENT_POLICY_DEBUG=yes, additional Policy logging
gets enabled in the agent. In particular, information about the inputs
for agent rpc API calls is logged in /tmp/policy.txt, on the Guest VM.
These inputs can be useful for investigating API calls that might have
been rejected by the Policy. Examples:
1. Load a failing policy file test1.rego on a different machine:
opa run --server --addr 127.0.0.1:8181 test1.rego
2. Collect the API inputs from Guest's /tmp/policy.txt and test on the
machine where the failing policy has been loaded:
curl -X POST http://localhost:8181/v1/data/agent_policy/CreateContainerRequest \
--data-binary @test1-inputs.json
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
Add k0s support to kata-deploy, in the very same way kata-containers
already supports k3s, and rke2.
k0s support requires v1.27.1, which is noted as part of the kata-deploy
documentation, as it's the way to use dynamic configuration on
containerd CRI runtimes.
This support will only be part of the `main` branch, as it's not a bug
fix that can be backported to the `stable-3.2` branch, and this is also
noted as part of the documentation.
Fixes: #7548
Signed-off-by: Steve Fan <29133953+stevefan1999-personal@users.noreply.github.com>
when interacting with systemd. We have occasionally faced issues with
compatibility between the systemctl version used inside the kata-deploy
container and the systemd version on the host. Instead of using a containerized
systemctl with bind mounted sockets, nsenter the host and run systemctl from
there. This provides less coupling between the kata-deploy container and the
host.
Fixes: #7511
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
Depends on mutiarch feature of ubuntu, we can set up cross build
environment easily and achive as good build performance as native
build.
Fixes: #6557
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
It's too long a time to cross build agent based on docker buildx, thus
we cross build rootfs based on a container with cross compile toolchain
of gcc and rust with musl libc. Then we get fast build just like native
build.
rootfs initrd cross build is disabled as no cross compile tolchain for
rust with musl lib if found for alpine and based on docker buildx takes
too long a time.
Fixes: #6557
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Based on messense/rust-musl-cross which offer cross build musl lib
environment to cross compile virtiofsd.
Fixes: #6557
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
shim-v2 has go and rust code. For rust code, we use messense/rust-musl-cross
to build for speed up as it doesn't depends on qemu emulation. Build go
code based on docker buildx as it doesn't support cross build now.
Fixes: #6557
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
kata-deploy-binaries-in-docker.sh is the entry to build kata components.
set some environment to facilitate the following cross build work.
Fixes: #6557
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
We leverage three env, TARGET_ARCH means the buid target tuple;
ARCH nearly the same meaning with TARGET_ARCH but has been widely
used in kata; CROSS_BUILD means if you want to do cross compile.
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
diferent -> different
And also let's make sure we escape the backticks around the kata-deploy
environment variables, otherwise bash will try to interpret those.
Fixes: #7497
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This will help folks to debug / understand what's been passed to the
kata-deploy.sh script.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's allow the daemonset to create the runtimeclasses, which will
decrease one manual step a user of kata-deploy should take, and also
help us in the Confidential Containers land as the Operator can just
delegate it to this script.
Fixes: #7409
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This can be easily done as there was no official release with the
previous values.
The reason we're doing so is because when using `yq` to replace the
value, even when forcing `--tag '!!str' "yes"`, the content is placed
without quotes, causing errors in our CI.
While here, we're also removing the fallback value for DEBUG, as it is
**always** set in the kata-deploy.yaml file.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This will make things simpler to only create the handlers defined by the
kata-deploy user.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This will become handy in the near future, as we want to have separate
enrties for each file, while still keeping this one.
Having the entries sorted will make our lives easier to test those are
always in sync.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
kata-deploy-binaries.sh uses the last commit in
tools/packaging/static-build/kernel for its version check, while the cache
generation uses tools/packaging/kernel. Use tools/packaging/static-build/kernel
as $kata_config_version is already part of the version string and covers any
changes to tools/packaging/kernel.
Fixes: #7403
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
The SEV kernel cache calls create_cache_asset() twice, once for the kernel and
once for modules. Both calls need to use the same version string, otherwise the
second call overwrites the "latest" file of the first one and the cache is not
used.
Fixes: #7403
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
Instead of hardcoding shims as part of the script, let's ensure we can
allow them to be created based on environment variables passed to the
daemonset.
This change brings no functionality change as the default values in the
daemonset are exactly what has been used as part of the scripts.
Fixes: #7407
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
`module_dir` has been passed to the function but was never assigned to a
var, leading to errors when trying to use it.
Fixes: #7416
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
kata-debug is a tool that is used as part of the Kata Containers CI to gather
information from the node, in order to help debugging issues with Kata
Containers.
As one can imagine, this can be expanded and used outside of the CI context,
and any contribution back to the script is very much welcome.
The resulting container is stored at the [Kata Containers quay.io
space](https://quay.io/repository/kata-containers/kata-debug) and can
be used as shown below:
```sh
kubectl debug $NODE_NAME -it --image=quay.io/kata-containers/kata-debug:latest
```
Fixes: #7397
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We need to correctly get the full path of the versions.yaml file as part
of the merge-builds.sh script, as we do a `pushd` there and that leads
to a fail merging the artefacts as the `versions.yaml` file does not
exists in that path.
Fixes: #7405
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Any change in the script used to build the kernel should invalidate the
cache.
Fixes: #7403
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's make things simpler to figure out which version of Kata
Containers has been deployed, and also which artefacts come with it.
This will help us immensely in the future, for the TEEs use case, so we
can easily know whether we can deploy a specific guest kernel for a
specific host kernel.
Fixes: #7394
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We've not been using nor shipping this kernel for a very long time.
Regardless, we're leaving behind the logic in the kernel scripts to
build it, in case it becomes necessary in the future.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Kernel v6.1.38 is the current latest LTS version, switch to it. No
patches should be necessary. Some CONFIG options have been removed:
- CONFIG_MEMCG_SWAP is covered by CONFIG_SWAP and CONFIG_MEMCG
- CONFIG_ARCH_RANDOM is unconditionally compiled in
- CONFIG_ARM64_CRYPTO is covered by CONFIG_CRYPTO and ARCH=arm64
Fixes: #6086
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
