Let's improve the log so we make it clear that we're only *actually*
adding the net device to the Cloud Hypervisor configuration when calling
our own version of VmAddNetPut().
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
We want to have the file descriptors of the opened tuntap device to pass
them down to the VMMs, so the VMMs don't have to explicitly open a new
tuntap device themselves, as the `container_kvm_t` label does not allow
such a thing.
With this change we ensure that what's currently done when using QEMU as
the hypervisor, can be easily replicated with other VMMs, even if they
don't support multiqueue.
As a side effect of this, we need to close the received file descriptors
in the code of the VMMs which are not going to use them.
Fixes: #3533
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Adding FFI_NO_PI to the netlink flags causes no harm to the supported
and tested hypervisors as when opening the device by its name Cloud
Hypervisor[0], Firecracker[1], and QEMU[2] do set the flag already.
However, when receiving the file descriptor of an opened tutap device
Cloud Hypervisor is not able to set the flag, leaving the guest without
connectivity.
To avoid such an issue, let's simply add the FFI_NO_PI flag to the
netlink flags and ensure, from our side, that the VMMs don't have to set
it on their side when dealing with an already opened tuntap device.
Note that there's a PR opened[3] just for testing that this change
doesn't cause any breakage.
[0]: e52175c2ab/net_util/src/tap.rs (L129)
[1]: b6d6f71213/src/devices/src/virtio/net/tap.rs (L126)
[2]: 3757b0d08b/net/tap-linux.c (L54)
[3]: https://github.com/kata-containers/kata-containers/pull/4292
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
This is basically a no-op right now, as:
* netPair.TapInterface.VMFds is nil
* the tap name is still passed to Cloud Hypervisor, which is the Cloud
Hypervisor's first choice when opening a tap device.
In the very near future we'll stop passing the tap name to Cloud
Hypervisor, and start passing the file descriptors of the opened tap
instead.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Knowing that VmAddNetPut works as expected, let's switch to manually
building the request and writing it to the appropriate socket.
By doing this it gives us more flexibility to, later on, pass the file
descriptor of the tuntap device to Cloud Hypervisor, as openAPI doesn't
support such operation (it has no notion of SCM Rights).
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Instead of creating the VM with the network device already plugged in,
let's actually add the network device *after* the VM is created, but
*before* the Vm is actually booted.
Although it looks like it doesn't make any functional difference between
what's done in the past and what this commit introduces, this will be
used to workaround a limitation on OpenAPI when it comes to passing down
the network device's file descriptor to Cloud Hypervisor, so Cloud
Hypervisor can use it instead of opening the device by its name on the
VMM side.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
VmAddNetPut is the API provided by the Cloud Hypervisor client (auto
generated) code to hotplug a new network device to the VM.
Let's expose it now as it'll be used as part this series, mostly to
guide the reviewer through the process of what we have to do, as later
on, spoiler alert, it'll end up being removed.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
So far this has been done for x86_64. Now that the support for building
and testing has been added for all arches, let's do the second part of
the switch.
We're still not done yet for powerpc, as some a virtifosd crash on the
rust version has been found by the maintainer.
Fixes: #4258, #4260
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Add more detail to the `kata-monitor` doc to allow an admin to make a
more informed decision about where and how to run the daemon.
Fixes: #4416.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
GetOOMEvent is a blocking call that will fail if
the container exit, in this case, it's not an error or warning.
Changing the log level for logs in case of GetOOMEvent call fails
will reduce log noise in a large cluster that has pods
creating/deleting frequently.
Fixes: #4376
Signed-off-by: Bin Liu <bin@hyper.sh>
Since #902 the `io.katacontainers.config.hypervisor` pod annotations
have only been permitted if explicitly allowed in the global
configuration. The default global configuration allows no such
annotations. That's important because several of those annotations
would cause Kata to execute arbitrary binaries, and so were wildly
unsafe.
However, this is inconvenient for the
`io.katacontainers.config.hypervisor.enable_iommu` annotation
specifically, which controls whether the sandbox VM includes a vIOMMU.
A guest side vIOMMU is necessary to implement VFIO passthrough devices
with `vfio_mode = vfio`, so enabling that mode of operation currently
requires a global configuration change, and can't just be enabled
per-pod.
Unlike some of the other hypervisor annotations, the `enable_iommu`
annotation is quite safe. By default the vIOMMU is not present, so
allowing a user to override it for a pod only improves their
facilities for isolation. Even if the global default were changed to
enable the vIOMMU, that doesn't compel the guest kernel to use it, so
allowing a user to disable the vIOMMU doesn't materially affect
isolation either.
Therefore, allow the io.katacontainers.config.hypervisor.enable_iommu
annotation to work in the default configurations.
fixes#4330
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Set thestop container force flag to true so that the container state is always set to
“StateStopped” after the container wait goroutine is finished. This is necessary for
the following delete container step to succeed.
Fixes: #4359
Signed-off-by: Feng Wang <feng.wang@databricks.com>
In linux 5.14 and hopefully some backports, core scheduling allows processes to
be co scheduled within the same domain on SMT enabled systems.
Containerd impl sets the core sched domain when launching a shim. This
allows a clean way for each shim(container/pod) to be in its own domain and any
additional containers, (v2 pods) be be launched with the same domain as well as
any exec'd process added to the container.
kernel docs: https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/core-scheduling.html
For Kata specifically, we will look for SCHED_CORE environment variable
to be set to indicate we shuold create a new schedule core domain.
This is equivalent to the containerd shim's PR: e48bbe8394Fixes: #4309
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Signed-off-by: Michael Crosby <michael@thepasture.io>
While end users can connect directly to the shim, let's provide a way to
easily get/set iptables from kata-runtime itself.
Fixes: #4080
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Without this, potential errors are silently dropped. Let's ensure we
return the error code as well as potenial data from the response.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Before, we had a mix of slash, etc. Unfortunately, when cleaning URL
paths, serve mux seems to mangle the request method, resulting in each
request being a GET (instead of PUT or POST).
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Add two endpoints: ip6tables, iptables.
Each url handler supports GET and PUT operations. PUT expects
the requests' data to be []bytes, and to contain iptable information in
format to be consumed by iptables-restore.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Introduce get/set iptable handling. We add a sandbox API for getting and
setting the IPTables within the guest. This routes it from sandbox
interface, through kata-agent, ultimately making requests to the guest
agent.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
This release has been tracked through the v24.0 project.
virtio-iommu specification describes how a device can be attached by default
to a bypass domain. This feature is particularly helpful for booting a VM with
guest software which doesn't support virtio-iommu but still need to access
the device. Now that Cloud Hypervisor supports this feature, it can boot a VM
with Rust Hypervisor Firmware or OVMF even if the virtio-block device exposing
the disk image is placed behind a virtual IOMMU.
Multiple checks have been added to the code to prevent devices with identical
identifiers from being created, and therefore avoid unexpected behaviors at boot
or whenever a device was hot plugged into the VM.
Sparse mmap support has been added to both VFIO and vfio-user devices. This
allows the device regions that are not fully mappable to be partially mapped.
And the more a device region can be mapped into the guest address space, the
fewer VM exits will be generated when this device is accessed. This directly
impacts the performance related to this device.
A new serial_number option has been added to --platform, allowing a user to
set a specific serial number for the platform. This number is exposed to the
guest through the SMBIOS.
* Fix loading RAW firmware (#4072)
* Reject compressed QCOW images (#4055)
* Reject virtio-mem resize if device is not activated (#4003)
* Fix potential mmap leaks from VFIO/vfio-user MMIO regions (#4069)
* Fix algorithm finding HOB memory resources (#3983)
* Refactor interrupt handling (#4083)
* Load kernel asynchronously (#4022)
* Only create ACPI memory manager DSDT when resizable (#4013)
Deprecated features will be removed in a subsequent release and users should
plan to use alternatives
* The mergeable option from the virtio-pmem support has been deprecated
(#3968)
* The dax option from the virtio-fs support has been deprecated (#3889)
Fixes: #4317
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Today the shim does a translation when doing
direct-volume stats where it takes the source and
returns the mount path within the guest.
The source for a direct-assigned volume is actually
the device path on the host and not the publish
volume path.
This change will perform a lookup of the mount info
during direct-volume stats to ensure that the
device path is provided to the shim for querying
the volume stats.
Fixes: #4297
Signed-off-by: Yibo Zhuang <yibzhuang@gmail.com>
The go default http mux AFAIK doesn’t support pattern
routing so right now client is padding the url
for direct-volume stats with a subpath of the volume
path and this will always result in 404 not found returned
by the shim.
This change will update the shim to take the volume
path as a GET query parameter instead of a subpath.
If the parameter is missing or empty, then return
400 BadRequest to the client.
Fixes: #4297
Signed-off-by: Yibo Zhuang <yibzhuang@gmail.com>
The action function expects a function that returns error
but the current direct-volume stats Action returns
(string, error) which is invalid.
This change fixes the format and print out the stats from
the command instead.
Fixes: #4293
Signed-off-by: Yibo Zhuang <yibzhuang@gmail.com>
The documentation of the bufio package explicitly says
"Err returns the first non-EOF error that was encountered by the
Scanner."
When io.EOF happens, `Err()` will return `nil` and `Scan()` will return
`false`.
Fixes#4079
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
As now we build and ship the rust version of virtiofsd, which is not
tied to QEMU, we need to update its default location to match with where
we're installing this binary.
Fixes: #4249
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
go-test.sh by default adds the -v option to 'go test' meaning that output
will be printed from all the passing tests as well as any failing ones.
This results in a lot of output in which it's often difficult to locate the
failing tests you're interested in.
So, remove -v from the default flags.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
One of the responsibilities of the go-test.sh script is setting up the
default flags for 'go test'. This is constructed across several different
places in the script using several unneeded intermediate variables though.
Consolidate all the flag construction into one place.
fixes#4190
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
go-test.sh changes behaviour based on both the $CI and $KATA_DEV_MODE
variables, but not in a way that makes a lot of sense.
If either one is set it uses the test_coverage path, instead of the
test_local path. That collects coverage information, as the name
suggests, but it also means it runs the tests twice as root and
non-root, which is very non-obvious.
It's not clear what use case the test_local path is for at all.
Developer local builds will typically have $KATA_DEV_MODE set and CI
builds will have $CI set. There's essentially no downside to running
coverage all the time - it has little impact on the test runtime.
In addition, if *both* $CI and $KATA_DEV_MODE are set, the script
refuses to run things as root, considering it "unsafe". While having
both set might be unwise in a general sense, there's not really any
way running sudo can be any more unsafe than it is with either one
set.
So, simplify everything by just always running the test_coverage path.
This leaves the test_local path unused, so we can remove it entirely.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
go-test.sh accepts subcommands, however invoking it in the usual way via
the Makefile doesn't use them. In fact the only remaining subcommand is
"help" and we already have another way of getting the usage information
(-h or --help). We don't need a second way, so just drop subcommand
handling.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
go-test.sh defaults to testing all the packages listed by go list, except
for a number filtered out. It turns out that none of those filters are
necessary any more:
* We've long required a Go newer than 1.9 which means the vendor filter
isn't needed
* The agent filter doesn't do anything now that we've moved to the Kata
2.x unified repo
* The tests filters don't hit anything on the list of modules in
src/runtime (which is the only user of the script)
But since we don't need to filter anything out any more, we don't even need
to iterate through a list ourselves. We can simply pass "./..." directly
to go test and it will iterate through all the sub-packages itself.
Interestingly this more than doubles the speed of "make test" for me - I
suspect because go test's internal paralellism works better over a larger
pool of tests.
This also lets us remove handling of non-existent coverage files from
test_go_package(), since with default options we will no longer test packages without tests
by default. If the user explicitly requests testing of a package with no
tests, then failing makes sense.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
