- D-Bus enabling now occurs only in setup_rootfs (instead of
prepare_overlay and setup_rootfs)
- Adjust permissions of / so dbus-broker will be able to traverse FS
These changes enables kata-agent to successfully communicate with D-Bus.
Fixes#6677
Signed-off-by: Vladimir <amigo.elite@gmail.com>
(cherry picked from commit 3e7b902265)
Signed-off-by: Vladimir <amigo.elite@gmail.com>
The agent now offloads cgroup configuration to systemd when
possible. This requires to enable D-Bus in order to communicate
with systemd.
Fixes#6657
Signed-off-by: Greg Kurz <groug@kaod.org>
(cherry picked from commit eb1762e813)
Signed-off-by: Greg Kurz <groug@kaod.org>
kata-deploy files must be adapted to a new release. The cases where it
happens are when the release goes from -> to:
* main -> stable:
* kata-deploy-stable / kata-cleanup-stable: are removed
* stable -> stable:
* kata-deploy / kata-cleanup: bump the release to the new one.
There are no changes when doing an alpha release, as the files on the
"main" branch always point to the "latest" and "stable" tags.
Signed-off-by: Greg Kurz <groug@kaod.org>
When starting an initrd the kernel expects to find /dev/console in the initrd,
so that it can connect it as stdin/stdout/stderr to the /init process. If the
device node is missing the kernel will complain that it was unable to open an
initial console. If kata-agent is the initrd init process, it will also result
in log messages not being logged to console and thus not forwarded to host
syslog.
Add a set of standard device nodes for completeness, so that console logging
works. To do that we install the makedev packge which provides a MAKEDEV helper
that knows the major/minor numbers. Unfortunately the debian package tries to
create devnodes from postinst, which can be suppressed if systemd-detect-virt
is present. That's why we create a small dummy script that matches what
systemd-detect-virt would output (anything is enough to suppress mknod).
Fixes: #6261
Signed-off-by: Jeremi Piotrowski <jpiotrowski@microsoft.com>
(cherry picked from commit 76e926453a)
Signed-off-by: Greg Kurz <groug@kaod.org>
In the `install_go_rust.sh` file we're adding a
x86_64-unknown-linux-musl target unconditionally. That should be,
instead, based in the ARCH of the host and the appropriate LIBC to be
used with that host.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
(cherry picked from commit 47c058599a)
Signed-off-by: Greg Kurz <groug@kaod.org>
When building the kata static arm64 package, the stages of firecracker report errors.
Fixes: #6318
Signed-off-by: SinghWang <wangxin_0611@126.com>
(cherry picked from commit 697ec8e578)
Signed-off-by: Greg Kurz <groug@kaod.org>
kata-deploy files must be adapted to a new release. The cases where it
happens are when the release goes from -> to:
* main -> stable:
* kata-deploy-stable / kata-cleanup-stable: are removed
* stable -> stable:
* kata-deploy / kata-cleanup: bump the release to the new one.
There are no changes when doing an alpha release, as the files on the
"main" branch always point to the "latest" and "stable" tags.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
This is to install a missing binary protoc in shim-v2 Dockerfile.
Fixes: #6244
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
(cherry picked from commit 10603e3def)
For kata containers, rootfs is used in the read-only way.
EROFS can noticably decrease metadata overhead.
On the basis of supporting the EROFS file system, it supports using the config parameter to switch the file system used by rootfs.
Fixes: #6063
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: yaoyinnan <yaoyinnan@foxmail.com>
We already have verbose output while merging the builds from various
build targets. Getting rid of verbose output to speed up.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
This is to make a docker version to v20.10 in docker upstream image ubuntu:20.04 for s390x and ppc64le.
Fixes: #6211
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Update Readme to instruct users to increment the kata config version
for any changes made to configs or patches under packaging/kernel.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
link-self-contained is not supported on ppc64le rust target.
Hence, do not pass it while building virtiofsd.
Fixes: #6195
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
As Chao Wu added the support for building the dragonball kernel as a new
experimental kernel, let's make sure we reflect that as part of the
kata-deploy build scripts.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
As QEMU released its v7.2.0 version in December last year, last do the
bump on our side.
A few configuration options have been removed between the v6.2.0 (the
version we currently use) and v7.2.0, so those have also been dropped
from our configure-hypervison.sh script (for this specific version).
Also, we're explicitly setting --disable-virtiofsd for the platforms
that we're testing using the rust version.
See: a8d6abe129/docs/about/deprecated.rst (virtiofsd)Fixes: #6102
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Add some new ignore items to avoid local builds that cause git to track a lot of files
Fixes: #5900
Signed-off-by: Binbin Zhang <binbin36520@gmail.com>
In order to let upcall being used by Kata Container, we need to add
those patches into kernel build script.
Currently, only when experimental (-e) and hypervisor type dragonball
(-t dragonball) are both enabled, that the upcall patches will be
applied to build a 5.10 guest kernel.
example commands: sh ./build-kernel.sh -e -t dragonball -d setup
fixes: #5642
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
Upcall is a direct communication tool between VMM and guest developed
upon vsock. The server side of the upcall is a driver in guest kernel
(kernel patches are needed for this feature) and it'll start to serve
the requests after the kernel starts. And the client side is in
Dragonball VMM , it'll be a thread that communicates with vsock through
uds.
We want to keep the lightweight of the VM through the implementation of
the upcall, through which we could achieve vCPU hotplug, virtio-mmio
hotplug without implementing complex and heavy virtualization features
such as ACPI virtualization.
fixes: #5642
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
If a pod of kata is deployed on a machine, after the machine restarts, the pod status of kata-deploy will be CrashLoopBackOff.
Fixes: #5868
Signed-off-by: SinghWang <wangxin_0611@126.com>
For now, rng init is too slow for kata3.0/dragonball. Enable
random_trust_cpu can speed up rng init when kernel boot.
Fixes: #5870
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Create a guest image to support SELinux for containers inside the guest
if `SELINUX=yes` is specified. This works only if the guest rootfs is
CentOS and the init service is systemd, not the agent init. To enable
labeling the guest image on the host, selinuxfs must be mounted on the
host. The kata-agent will be labeled as `container_runtime_exec_t` type.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
Add kernel configs related to SELinux in order to add the
support for containers running inside the guest.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
CONFIG_X86_SGX is introduced after kernel 5.11, and that config is a
default x86_64 config for Kata build-kernel.sh script.
But if we use -v to specify any kernel version below 5.11 will cause an
inevitable error because CONFIG_X86_SGX is not supported in older
kernels and that may cause problem for the situation if we need kernel
version below 5.11.
So I propose to put CONFIG_X86_SGX into whitelist.conf to avoid break
building guest kernel below 5.11.
fixes: #5741
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
