For now, image nvdimm on qemu/arm64 depends on UEFI/ACPI, so if there
is no firmware offered, it should be disabled.
Fixes: #6468
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This PR is a continuing work for (kata-containers#3679).
This generalizes the previous VFIO device handling which only
focuses on PCI to include AP (IBM Z specific).
Fixes: kata-containers#3678
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Initial VFIO-AP support (#578) was simple, but somewhat hacky; a
different code path would be chosen for performing the hotplug, and
agent-side device handling was bound to knowing the assigned queue
numbers (APQNs) through some other means; plus the code for awaiting
them was written for the Go agent and never released. This code also
artificially increased the hotplug timeout to wait for the (relatively
expensive, thus limited to 5 seconds at the quickest) AP rescan, which
is impractical for e.g. common k8s timeouts.
Since then, the general handling logic was improved (#1190), but it
assumed PCI in several places.
In the runtime, introduce and parse AP devices. Annotate them as such
when passing to the agent, and include information about the associated
APQNs.
The agent awaits the passed APQNs through uevents and triggers a
rescan directly.
Fixes: #3678
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Generalize VFIO devices to allow for adding AP in the next patch.
The logic for VFIOPciDeviceMediatedType() has been changed and IsAPVFIOMediatedDevice() has been removed.
The rationale for the revomal is:
- VFIODeviceMediatedType is divided into 2 subtypes for AP and PCI
- Logic of checking a subtype of mediated device is included in GetVFIODeviceType()
- VFIOPciDeviceMediatedType() can simply fulfill the device addition based
on a type categorized by GetVFIODeviceType()
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
e.g., split_vfio_option is PCI-specific and should instead be named
split_vfio_pci_option. This mutually affects the runtime, most notably
how the labels are named for the agent.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
This adds /dev/mshv to the list of sandbox devices so that VMMs can
create Hyper-V VMs.
In our testing, this also doesn't error out in case /dev/mshv isn't
present.
Fixes#6454.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
On hotplug of memory as containers are started, remount all ephemeral mounts with size option set to the total sandbox memory
Fixes: #6417
Signed-off-by: Sidhartha Mani <sidhartha_mani@apple.com>
When update the nydusd to 2.2, the argument "--hybrid-mode" cause
the following error:
thread 'main' panicked at 'ArgAction::SetTrue / ArgAction::SetFalse is defaulted'
Maybe we should remove it to upgrad nydusd
Fixes: #6407
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
$ make install
make: *** No rule to make target 'containerd-shim-kata-v2', needed by 'install-containerd-shim-v2'. Stop.
Spotted when building kata-runtime with a different name for
SHIMV2_OUTPUT. For instance, trying to keep different runtime binaries
installed at the same time, one from master and another from lets say,
the CCv0 branch, with the following small change applied.
diff --git a/src/runtime/Makefile b/src/runtime/Makefile
index 95efaff78..2bab9eb75 100644
--- a/src/runtime/Makefile
+++ b/src/runtime/Makefile
@@ -231,7 +231,7 @@ SED = sed
CLI_DIR = cmd
SHIMV2 = containerd-shim-kata-v2
-SHIMV2_OUTPUT = $(bCURDIR)/$(SHIMV2)
+SHIMV2_OUTPUT = $(CURDIR)/$(SHIMV2)-ccv0
SHIMV2_DIR = $(CLI_DIR)/$(SHIMV2)
MONITOR = kata-monitor
Fixes: #6398
Signed-off-by: Eduardo Lima (Etrunko) <etrunko@redhat.com>
This patch re-generates the client code for Cloud Hypervisor v30.0.
Note: The client code of cloud-hypervisor's OpenAPI is automatically
generated by openapi-generator.
Fixes: #6375
Signed-off-by: Bo Chen <chen.bo@intel.com>
Fix path check bypassed issuse introduced by #6082,
use filepath.Clean() to clean path before check
Fixes: #6082
Signed-off-by: XDTG <click1799@163.com>
Currently the symbolic link for virtiofsd which is used as
a valid path is not updated on every CI run. Fix it by
using the actual path of installation.
Fixes: #6311
Signed-off-by: Amulyam24 <amulmek1@in.ibm.com>
Normally we return the context when creating a trace span so that the
ordering of spans w.r.t. calls is maintained in tracing output. Add
missing context for StartVM() for Cloud Hypervisor.
Fixes#6271
Signed-off-by: Chelsea Mafrica <chelsea.e.mafrica@intel.com>
Updating this field, as `cpuid` provides host level data, which is not
what a guest would expect for Reduced Phsycial Bits. In almost all
cases, we should be using `1` for the value here.
Amend: Adding unit test change.
Fixes: #5006
Signed-off-by: Larry Dewey <larry.dewey@amd.com>
For kata containers, rootfs is used in the read-only way.
EROFS can noticably decrease metadata overhead.
On the basis of supporting the EROFS file system, it supports using the config parameter to switch the file system used by rootfs.
Fixes: #6063
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: yaoyinnan <yaoyinnan@foxmail.com>
launchClh already has a timeout of 10seconds for launching clh, e.g.
if launchClh or setupVirtiofsDaemon takes a few seconds the context's
deadline will already be expired by the time it reaches bootVM
Fixes#6240
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Change cache mod from literal to const and place them in one place.
Also set default cache mode from `none` to `never` in
`pkg/katautils/config-settings.go.in`.
Fixes: #6151
Signed-off-by: Bin Liu <bin@hyper.sh>
Normally, the span name should be the same as the function name, and the log subsystem should not contain spaces.
Fixes#6153
Signed-off-by: joannejchen <chenjjoanne@gmail.com>
There are lots of unit test cases fails regularly on aarch64, including
TestIOCopy, create_tmpfs. Temporarily skip it for now and enable it
after them get fixed.
Fixes: #6194
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
The cmd.ExtraFiles feature that is used to implement appendFDs takes an
array of arbitray file descriptors and internally renumbers them to be
consecutive starting from 3, using dup2().
This isn't especially obvious : document it for the sake of clarity.
Fixes#6199
Signed-off-by: Greg Kurz <groug@kaod.org>
The QEMU log file is essentially about fine grain tracing of QEMU
internals and mostly useful for developpers, not production. Notably,
the log file isn't limited in size, nor rotated in any way. It means
that a container running in the VM could possibly flood the log file
with a guest triggerable trace. For example, on openshift, the log
file is supposed to reside on a per-VM 14 GiB tmpfs mount. This means
that each pod running with the kata runtime could potentially consume
this amount of host RAM which is not acceptable.
Error messages are best collected from QEMU's stderr as kata is doing
now since PR #5736 was merged. Drop support for the QEMU log file
because it doesn't bring any value but can certainly do harm.
Fixes#6173
Signed-off-by: Greg Kurz <groug@kaod.org>
os.Stat("unix:///run/vc/sbs/sid/shim-monitor.sock") will fail,
should be os.Stat("/run/vc/sbs/sid/shim-monitor.sock")
Fixes:#6148
Signed-off-by: Zhongtao Hu <zhongtaohu.tim@linux.alibaba.com>
LaunchQemu now connects a pipe to QEMU's stderr and makes it
usable by callers through a Go io.ReadCloser object. As
explained in [0], all messages should be read from the pipe
before calling cmd.Wait : introduce a LogAndWait helper to handle
that.
Fixes#5780
Signed-off-by: Greg Kurz <groug@kaod.org>
QEMU has always been started daemonized since the beginning. I
could not find any justification for that though, but it certainly
introduces a problem : QEMU stops logging errors when started this
way, which isn't accaptable from a support standpoint. The QEMU
community discourages the use of -daemonize ; mostly because
libvirt, QEMU's primary consummer, doesn't use this option and
prefers getting errors from QEMU's stderr through a pipe in order
to enforce rollover.
Now that virtcontainers knows how to start QEMU with a pre-
established QMP connection, let's start QEMU without -daemonize.
This requires to handle the reaping of QEMU when it terminates.
Since cmd.Wait() is blocking, call it from a goroutine.
Signed-off-by: Greg Kurz <groug@kaod.org>
LaunchCustomQemu() currently starts QEMU with cmd.Run() which is
supposed to block until the child process terminates. This assumes
that QEMU daemonizes itself, otherwise LaunchCustomQemu() would
block forever. The virtcontainers package indeed enables the
Daemonize knob in the configuration but having such an implicit
dependency on a supposedly configurable setting is ugly and fragile.
cmd.Run() is :
func (c *Cmd) Run() error {
if err := c.Start(); err != nil {
return err
}
return c.Wait()
}
Let's open-code this : govmm calls cmd.Start() and returns the
cmd to virtcontainers which calls cmd.Wait().
If QEMU doesn't start, e.g. missing binary, there won't be any
errors to collect from QEMU output. Just drop these lines in govmm.
Similarily there won't be any log file to read from in virtcontainers.
Drop that as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Running QEMU daemonized ensures that the QMP socket is ready to
accept connections when LaunchQemu() returns. In order to be
able to run QEMU undaemonized, let's handle that part upfront.
Create a listener socket and connect to it. Pass the listener
to QEMU and pass the connected socket to QMP : this ensures
that we cannot fail to establish QMP connection and that we
can detect if QEMU exits before accepting the connection.
This is basically what libvirt does.
Signed-off-by: Greg Kurz <groug@kaod.org>
QEMU's -qmp option can be passed the file descriptor of a socket that
is already in listening mode. This is done with by passing `fd=XXX`
to `-qmp` instead of a path. Note that these two options are mutually
exclusive : QEMU errors out if both are passed, so we check that as
well in the validation function.
While here add the `path=` stanza in the path based case for clarity.
Signed-off-by: Greg Kurz <groug@kaod.org>
