Add required kernel config for dm-crypt/dm-integrity/dm-verity
and related crypto config.
Add userspace command line tools for disk encryption support
and ext4 file system utilities.
Fixes: #6674
Signed-off-by: Arron Wang <arron.wang@intel.com>
This PR replaces single spaces to tabs in order to fix the
indentation of the rootfs script.
Fixes#6848
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
- D-Bus enabling now occurs only in setup_rootfs (instead of
prepare_overlay and setup_rootfs)
- Adjust permissions of / so dbus-broker will be able to traverse FS
These changes enables kata-agent to successfully communicate with D-Bus.
Fixes#6677
Signed-off-by: Vladimir <amigo.elite@gmail.com>
The agent now offloads cgroup configuration to systemd when
possible. This requires to enable D-Bus in order to communicate
with systemd.
Fixes#6657
Signed-off-by: Greg Kurz <groug@kaod.org>
attestation-agent depends on tdx-attest-rs when cc_kbc is enabled, which
depends on libtdx-attest.so. Include the dev package in build container,
and the runtime package in the built rootfs.
The build of tdx-attest-sys (which is a dep of tdx-attest-rs) uses
bindgen, which requires libclang so install that in the build container
as well.
We specify the tdx stack DCAP v1.15
Fixes: #6519
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
`ttrpc=true` parameter tells the Makefile of attestation-agent
to build the attestation-agent with ttrpc support
Signed-off-by: Xynnn007 <xynnn@linux.alibaba.com>
Update the build to use the attestation-agent makefile to build it, so
we can pick up the enhancements there
Fixes: #6253
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Now we don't need to have skopeo and umoci in the rootfs
remove the code that optionally builds and installs them
Fixes: #3970
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
Adds AA_KBC option in rootfs builder to specify online_sev_kbc into the initrd.
Guid and secret type for sev updated in shim makefile to generate default config
KBC URI will be specified via kernel_params
Also changing the default option for sev in the local build scipts
Making sure sev guest kernel module is copied into the initrd. Will also eventually be needed for SNP
Fixes: #5650
Signed-off-by: Alex Carter <Alex.Carter@ibm.com>
Create a guest image to support SELinux for containers inside the guest
if `SELINUX=yes` is specified. This works only if the guest rootfs is
CentOS and the init service is systemd, not the agent init. To enable
labeling the guest image on the host, selinuxfs must be mounted on the
host. The kata-agent will be labeled as `container_runtime_exec_t` type.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
Add tag entry to the attestation agent entry of the versions file.
Checkout tag commit after cloning AA in rootfs builder.
Fixes: #5373
Fixes: kata-containers#5373
Signed-Off-By: Alex Carter <alex.carter@ibm.com>
Umoci is not longer required if we have the attestation-agent, so don't
override the user input
Fixes: #5237
Signed-off-by: stevenhorsman <steven@uk.ibm.com>
To avoid the random failures when we are building the rootfs as it seems
that it does not find the value for the libseccomp and gperf directory,
this PR export these variables.
Fixes#5232
Signed-off-by: Gabriela Cervantes <gabriela.cervantes.tellez@intel.com>
Using depmod when adding kernel modules to get dependencies.
Needed for the efi secret module for sev.
Fixes: #5125
Signed-Off-By: Alex Carter <alex.carter@ibm.com>
Adds default config file.
Adds case in rootfs.sh to copy config.
Fixes kata-containers#5023
Fixes: #5023
Signed-Off-By: Alex Carter <alex.carter@ibm.com>
Guest log is showing a hang on systemd getty start.
Adding symlink for /dev/ttyS0 resolves issue.
Fixes: #4932
Signed-Off-By: Ryan Savino <ryan.savino@amd.com>
Initialize the trusted stroage when the device is defined
as "/dev/trusted_store" with shell script as first step.
Fixes: #4882
Signed-off-by: Wang, Arron <arron.wang@intel.com>
It would be nice to use `versions.yaml` for the maintainability.
Previously, we have been specified the `libseccomp` and the `gperf` version
directly in this script without using the `versions.yaml` because the current
snap workflow is incomplete and fails.
This is because snap CI environment does not have kata-cotnainers repository
under ${GOPATH}. To avoid the failure, the `rootfs.sh` extracts the libseccomp
version and url in advance and pass them to the `install_libseccomp.sh` as
environment variables.
Fixes: #4941
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
Add required kernel config for dm-crypt/dm-integrity/dm-verity
and related crypto config.
Add userspace command line tools for disk encryption support
and ext4 file system utilities.
Fixes: #4761
Signed-off-by: Arron Wang <arron.wang@intel.com>
For CoCo stack, the pause image is managed by host side,
then it may configure a malicious pause image, we need package
a pause image inside the rootfs and don't the pause image from host.
Fixes: #4768
Signed-off-by: Wang, Arron <arron.wang@intel.com>
In at least kata versions 2.3.3 and 2.4.0 it was noticed that the guest
operating system's clock would drift out of sync slowly over time
whilst the pod was running.
This had previously been raised and fixed in the old reposity via [1].
In essence kvm_ptp and chrony were paired together in order to
keep the system clock up to date with the host.
In the recent versions of kata metioned above,
the chronyd.service fails upon boot with status `266/NAMESPACE`
which seems to be due to the fact that the `/var/lib/chrony`
directory no longer exists.
This change sets the `/var/lib/chrony` directory for the `ReadWritePaths`
to be ignored when the directory does not exist, as per [2].
[1] https://github.com/kata-containers/runtime/issues/1279
[2] https://www.freedesktop.org/software/systemd
/man/systemd.exec.html#ReadWritePaths=
Fixes: #4167
Signed-off-by: Champ-Goblem <cameron_mcdermott@yahoo.co.uk>
Use `multistrap` for building Ubuntu rootfs. Adds support for building
for foreign architectures using the `ARCH` environment variable
(including umoci).
In the process, the Ubuntu rootfs workflow is vastly simplified.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
- Add a doc comment
- Pass to build container, e.g. to build x86_64 with glibc (would
always use musl)
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Remove a lot of cruft of musl installations -- we needed those for the
Go agent, but Rustup just takes care of everything. aarch64 on
Debian-based & Alpine is an exception -- create a symlink
`aarch64-linux-musl-gcc` to `musl-tools`'s `musl-gcc` or `gcc` on
Alpine. This is unified -- arch-specific Dockerfiles are removed.
Furthermore, we should keep it in Ubuntu for supporting the offline SEV
KBC. We also keep it in Clear Linux, as that runs our internal checks,
but it is e.g. not shipped in CentOS Stream 9.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Use `multistrap` for building Ubuntu rootfs. Adds support for building
for foreign architectures using the `ARCH` environment variable.
In the process, the Ubuntu rootfs workflow is vastly simplified.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
- Add a doc comment
- Pass to build container, e.g. to build x86_64 with glibc (would
always use musl)
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Remove a lot of cruft of musl installations -- we needed those for the
Go agent, but Rustup just takes care of everything. aarch64 on
Debian-based & Alpine is an exception -- create a symlink
`aarch64-linux-musl-gcc` to `musl-tools`'s `musl-gcc` or `gcc` on
Alpine. This is unified -- arch-specific Dockerfiles are removed.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
