Pass SELinux policy for containers to the agent if `disable_guest_selinux`
is set to `false` in the runtime configuration. The `container_t` type
is applied to the container process inside the guest by default.
Users can also set a custom SELinux policy to the container process using
`guest_selinux_label` in the runtime configuration. This will be an
alternative configuration of Kubernetes' security context for SELinux
because users cannot specify the policy in Kata through Kubernetes's security
context. To apply SELinux policy to the container, the guest rootfs must
be CentOS that is created and built with `SELINUX=yes`.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
This configuration will allow users to choose between different
I/O backends for qemu, with the default being io_uring.
This will allow users to fallback to a different I/O mechanism while
running on kernels olders than 5.1.
Signed-off-by: Archana Shinde <archana.m.shinde@intel.com>
The tests ensure that interactions between drop-ins and the base
configuration.toml and among drop-ins themselves work as intended,
basically that files are evaluated in the correct order (base file
first, then drop-ins in alphabetical order) and the last one to set
a specific key wins.
Signed-off-by: Pavel Mores <pmores@redhat.com>
Let's add a `default_maxmemory` configuration, which allows the admins
to set the maximum amount of memory to be used by a VM, considering the
initial amount + whatever ends up being hotplugged via the pod limits.
By default this value is 0 (zero), and it means that the whole physical
RAM is the limit.
Fixes: #4516
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Policy for whats valid/invalid within the config varies by VMM, host,
and by silicon architecture. Let's keep katautils simple for just
translating a toml to the hypervisor config structure, and leave
validation to virtcontainers.
Without this change, we're doing duplicate validation.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Let's add the newly added disk rate limiter configurations to the Cloud
Hypervisor's hypervisor configuration.
Right now those are not used anywhere, and there's absolutely no way the
users can set those up. That's coming later in this very same series.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
Let's add the newly added network rate limiter configurations to the
Cloud Hypervisor's hypervisor configuration.
Right now those are not used anywhere, and there's absolutely no way the
users can set those up. That's coming later in this very same series.
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The directory created by `T.TempDir` is automatically removed when the
test and all its subtests complete.
This commit also updates the unit test advice to use `T.TempDir` to
create temporary directory in tests.
Fixes: #3924
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
As kata with qemu has supported lazyload, so this pr aims to
bring lazyload ability to kata with clh.
Fixes#3654
Signed-off-by: luodaowen.backend <luodaowen.backend@bytedance.com>
Even though it's still actually defined as the QEMU upper bound,
it's now abstracted away through govmm.
Signed-off-by: Samuel Ortiz <s.ortiz@apple.com>
firmware can be split into FIRMWARE_VARS.fd (UEFI variables as
configuration) and FIRMWARE_CODE.fd (UEFI program image). UEFI
variables can be customized per each user while UEFI code is kept same.
fixes#3583
Signed-off-by: Julio Montes <julio.montes@intel.com>
`enable_swap` option was added long time ago to add
`-realtime mlock=off` to the QEMU's command line.
Kata now supports QEMU 6, `-realtime` option has been deprecated and
`mlock=on` is causing unexpected behaviors in kata.
This patch removes support for `enable_swap`, `-realtime` and `mlock=`
since they are causing bugs in kata.
Signed-off-by: Julio Montes <julio.montes@intel.com>
This will be useful at runtime level; no need for oci or uuid to be subpkg of
virtcontainers.
While at it, ensure we run gofmt on the changed files.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
The physical current vcpu number should not be used directly as the
largest vcpu number is limited to defaultMaxQemuVCPUs.
Here, a new helper is introduced in pkg/katautils/config.go to get
current vcpu number.
Fixes: #2809
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Parametr builtIn is not used in function updateRuntimeConfigAgent,
delete it from updateRuntimeConfigAgent and LoadConfiguration
function signature.
Fixes: #1731
Signed-off-by: bin <bin@hyper.sh>
newQemuHypervisorConfig() sets it to an empty slice. We have to set the
same in the test config otherwise it is nil and reflect DeepEqual would
fail.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
If specified, sandbox_bind_mounts identifies host paths to be
mounted (ro) into the sandboxes shared path. This is only valid
if filesystem sharing is utilized.
The provided path(s) will be bindmounted (ro) into the shared fs directory on
the host, and thus mapped into the guest. If defaults are utilized,
these mounts should be available in the guest at
`/var/run/kata-containers/shared/containers/sandbox-mounts`
These will not be exposed to the container workloads, and are only
added for potential guest-services to consume (example: expose certs
into the guest that are available on the host).
Fixes: #1464
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
This commit includes two changes:
- migrate from opentracing to opentelemetry
- add jaeger configuration items
Fixes: #1351
Signed-off-by: bin <bin@hyper.sh>
Support the `sgx.intel.com/epc` annotation that is defined by the intel
k8s plugin. This annotation enables SGX. Hardware-based isolation and
memory encryption.
For example, use `sgx.intel.com/epc = "64Mi"` to create a container
with 1 EPC section with pre-allocated memory.
At the time of writing this patch, SGX patches have not landed on the
linux kernel project.
The following github kernel fork contains all the SGX patches for the
host and guest: https://github.com/intel/kvm-sgxfixes#483
Signed-off-by: Julio Montes <julio.montes@intel.com>
Set enable_debug_console=true in Kata's congiguration file,
runtime will pass `agent.debug_console`
and `agent.debug_console_vport=1026` to agent.
Fixes: #245
Signed-off-by: bin liu <bin@hyper.sh>
With kata containers moving to 2.0, (hybrid-)vsock will be the only
way to directly communicate between host and agent.
And kata-proxy as additional component to handle the multiplexing on
serial port is also no longer needed.
Cleaning up related unit tests, and also add another mock socket type
`MockHybridVSock` to deal with ttrpc-based hybrid-vsock mock server.
Fixes: #389
Signed-off-by: Penny Zheng penny.zheng@arm.com
[ port from runtime commit 0100af18a2afdd6dfcc95129ec6237ba4915b3e5 ]
To control whether guest can enable/disable some CPU features. E.g. pmu=off,
vmx=off. As discussed in the thread [1], the best approach is to let users
specify them. How about adding a new option in the configuration file.
Currently this patch only supports this option in qemu,no other vmm.
[1] https://github.com/kata-containers/runtime/pull/2559#issuecomment-603998256
Signed-off-by: Jia He <justin.he@arm.com>
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
We have defined specific config file configuration-fc.toml for firecracker,
including specific features and requirements, but the related unit test
TestNewFirecrackerHypervisor is missing.
Fixes: #250
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
Add configuration/annotation about network I/O throttling on VM level.
rx_rate_limiter_max_rate is dedicated to control network inbound
bandwidth per pod.
tx_rate_limiter_max_rate is dedicated to control network outbound
bandwidth per pod.
Fixes: #250
Signed-off-by: Penny Zheng <penny.zheng@arm.com>
The current path is hardcoded as follows:
virtio_fs_daemon = "/path/to/virtiofsd"
Switch to using the value of config.VirtioFSDaemon instead.
Fixes: #2686
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Fabiano Fidêncio <fidencio@redhat.com>
To use the kata-containers repo path.
Most of the change is generated by script:
find . -type f -name "*.go" |xargs sed -i -e \
's|github.com/kata-containers/runtime|github.com/kata-containers/kata-containers/src/runtime|g'
Fixes: #201
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
