If we are running FC hypervisor, it is not started when prestart hooks
are executed. So we should just ignore such error and just go ahead and
run the hooks.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
FC does not support network device hotplug. Let's add a check to fail
early when starting containers created by docker.
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Add a new hypervisor capability to tell if it supports device hotplug.
If not, we should run prestart hooks before starting new VMs as nerdctl
is using the prestart hooks to set up netns. To make nerdctl + FC
to work, we need to run the prestart hooks before starting new VMs.
Fixes: #6384
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
For remote hypervisor, the configmap, secrets, downward-api or project-volumes are
copied from host to guest. This patch watches for changes to the host files
and copies the changes to the guest.
Note that configmap updates takes significantly longer than updates via downward-api.
This is similar across runc and Kata runtimes.
Fixes: #7210
Signed-off-by: Pradipta Banerjee <pradipta.banerjee@gmail.com>
Signed-off-by: Julien Ropé <jrope@redhat.com>
(cherry picked from commit 3081cd5f8e)
(cherry picked from commit 68ec673bc4d9cd853eee51b21a0e91fcec149aad)
If modeVFIO is enabled we need 1st to attach the VFIO control group
device /dev/vfio/vfio an 2nd the actuall device(s) afterwards.Sort the
devices starting with device #1 being the VFIO control group device and
the next the actuall device(s)
/dev/vfio/<group>
Fixes: #7493
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Now that we have propper AP device support add a
unit test for testing the correct Attach/Detach of AP devices.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
The device.Bus was reset if a specific combination of
configuration parameters were not met. With the new
PCIe topology this should not happen anymore
Fixes: #7381
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
In Virt the vhost-user-block is an PCIe device so
we need to make sure to consider it as well. We're keeping
track of vhost-user-block devices and deduce the correct
amount of PCIe root ports.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Now it is possible to configure the PCIe topology via annotations
and addded a simple test, checking for Invalid and RootPort
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Refactor the bus assignment so that the call to GetAllVFIODevicesFromIOMMUGroup
can be used by any module without affecting the topology.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
The hypervisor_state file was the wrong location for the PCIe Port
settings, moved everything under device umbrella, where it can be
consumed more easily and we do not get into circular deps.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Some vmms, such as dragonball, will actively help us
perform online cpu operations when doing cpu hotplug.
Under the old onlineCpuMem interface, it is difficult
to adapt to this situation.
So we modify the semantics of nb_cpus in onlineCpuMemRequest.
In the original semantics, nb_cpus represents the number of
newly added CPUs that need to be online. The modified
semantics become that the number of online CPUs in the guest
needs to be guaranteed.
Fixes: #5030
Signed-off-by: Yushuo <y-shuo@linux.alibaba.com>
Signed-off-by: Ji-Xinyou <jerryji0414@outlook.com>
If a hypervisor debug console is enabled and sandbox_cgroup_only is set,
the hypervisor can fail to open /dev/ptmx, which prevents the sandbox
from launching.
This is caused by the absence of a device cgroup entry to allow access
to /dev/ptmx. When sandbox_cgroup_only is not set, the hypervisor
inherits the default unrestrcited device cgroup, but with it enabled it
runs into allow / deny list restrictions.
Fix by adding an allowlist entry for /dev/ptmx when debug is enabled,
sandbox_cgroup_only is true, and no /dev/ptmx is already in the list of
devices.
Fixes: #6870
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Added driver util function for easier handling of VFIO
devices outside of the VFIO module. At the sandbox level
we may need to set options depending if we have a VFIO/PCIe
device, like the fwCfg for confiential guests.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
If we have a VFIO device and cold-plug is enabled
we mark each device as ColdPlug=true and let the VFIO
module do the attaching.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
RawDevics are used to get PCIe device info early before the sandbox
is started to make better PCIe topology decisions
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Generalize VFIO devices to allow for adding AP in the next patch.
The logic for VFIOPciDeviceMediatedType() has been changed and IsAPVFIOMediatedDevice() has been removed.
The rationale for the revomal is:
- VFIODeviceMediatedType is divided into 2 subtypes for AP and PCI
- Logic of checking a subtype of mediated device is included in GetVFIODeviceType()
- VFIOPciDeviceMediatedType() can simply fulfill the device addition based
on a type categorized by GetVFIODeviceType()
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
On hotplug of memory as containers are started, remount all ephemeral mounts with size option set to the total sandbox memory
Fixes: #6417
Signed-off-by: Sidhartha Mani <sidhartha_mani@apple.com>
With `disable_netns=true`, we should never scan the sandbox netns which
is the host netns in such case.
Fixes: #6021
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Moby relies on the prestart hooks to configure network endpoints. We
should rescan the netns after running them so that the newly added
endpoints can be found and plugged to the guest.
Fixes: #5941
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Pass SELinux policy for containers to the agent if `disable_guest_selinux`
is set to `false` in the runtime configuration. The `container_t` type
is applied to the container process inside the guest by default.
Users can also set a custom SELinux policy to the container process using
`guest_selinux_label` in the runtime configuration. This will be an
alternative configuration of Kubernetes' security context for SELinux
because users cannot specify the policy in Kata through Kubernetes's security
context. To apply SELinux policy to the container, the guest rootfs must
be CentOS that is created and built with `SELINUX=yes`.
Fixes: #4812
Signed-off-by: Manabu Sugimoto <Manabu.Sugimoto@sony.com>
If we're using ACPI hotplug for memory, there's a limitation on the
amount of memory which can be hotplugged at a single time.
During hotplug, we'll allocate memory for the memmap for each page,
resulting in a 64 byte per 4KiB page allocation. As an example, hotplugging 12GiB
of memory requires ~192 MiB of *free* memory, which is about the limit
we should expect for an idle 256 MiB guest (conservative heuristic of 75%
of provided memory).
From experimentation, at pod creation time we can reliably add 48 times
what is provided to the guest. (a factor of 48 results in using 75% of
provided memory for hotplug). Using prior example of a guest with 256Mi
RAM, 256 Mi * 48 = 12 Gi; 12GiB is upper end of what we should expect
can be hotplugged successfully into the guest.
Note: It isn't expected that we'll need to hotplug large amounts of RAM
after workloads have already started -- container additions are expected
to occur first in pod lifecycle. Based on this, we expect that provided
memory should be freely available for hotplug.
If virtio-mem is being utilized, there isn't such a limitation - we can
hotplug the max allowed memory at a single time.
Fixes: #4847
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Return code is an int32 type, so if an error occurred, the default value
may be zero, this value will be created as a normal exit code.
Set return code to 255 will let the caller(for example Kubernetes) know
that there are some problems with the pod/container.
Fixes: #4419
Signed-off-by: liubin <liubin0329@gmail.com>
Ideally this config validation would be in a seperate package
(katautils?), but that would introduce circular dependency since we'd
call it from vc, and it depends on vc types (which, shouldn't be vc, but
probably a hypervisor package instead).
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Depending on the user of it, the hypervisor from hypervisor interface
could have differing view on what is valid or not. To help decouple,
let's instead check the hypervisor config validity as part of the
sandbox creation, rather than as part of the CreateVM call within the
hypervisor interface implementation.
Fixes: #4251
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
Introduce get/set iptable handling. We add a sandbox API for getting and
setting the IPTables within the guest. This routes it from sandbox
interface, through kata-agent, ultimately making requests to the guest
agent.
Signed-off-by: Eric Ernst <eric_ernst@apple.com>
The documentation of the bufio package explicitly says
"Err returns the first non-EOF error that was encountered by the
Scanner."
When io.EOF happens, `Err()` will return `nil` and `Scan()` will return
`false`.
Fixes#4079
Signed-off-by: Rafael Fonseca <r4f4rfs@gmail.com>
Translate the volume path from host-known path to guest-known path
and forward the request to kata agent.
Fixes: #3454
Signed-off-by: Feng Wang <feng.wang@databricks.com>
With the Linux implementation of the FilesystemSharer interface, we can
now remove all host filesystem sharing code from kata_agent and keep it
where it belongs: sandbox.go.
Signed-off-by: Samuel Ortiz <s.ortiz@apple.com>
To resourcecontrol, and make it consistent with the fact that cgroups
are a Linux implementation of the ResourceController interface.
Fixes: #3601
Signed-off-by: Samuel Ortiz <s.ortiz@apple.com>
We call it a ResourceController, and we make it not so Linux specific.
Now the Linux implementations is the cgroups one.
Signed-off-by: Samuel Ortiz <s.ortiz@apple.com>
