In cases where the D-Bus connection fails, add a little additional context about
the origin of the error.
Fixes: 6561
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Suggested-by: Archana Shinde <archana.m.shinde@intel.com>
Spell-checked-by: Greg Kurz <gkurz@redhat.com>
There can be an error while connecting to the cgroups managager, for
example a `ENOENT` if a file is not found. Make sure that this is
reported through the proper channels instead of causing a `panic()`
that does not provide much information.
Fixes: #6561
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reported-by: Greg Kurz <gkurz@redhat.com>
The kata monitor metrics API returns a huge size response,
if containers or sandboxs are a large number,
focus on what we need will be harder.
Fixes: #6500
Signed-off-by: Miao Xia <xia.miao1@zte.com.cn>
This change provides a preliminary implementation for the Cloud Hypervisor (CH) feature ([currently
disabled](https://github.com/kata-containers/kata-containers/pull/6201))
to allow it to generate the CH configuration for handling confidential guests.
This change also introduces concrete errors using the `thiserror` crate
(see `src/runtime-rs/crates/hypervisor/ch-config/src/errors.rs`) and a
lot of unit tests for the conversion code that generates the CH
configuration from the generic Hypervisor configuration.
Fixes: #6430.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
Enable Cloud Hypervisor debug based on the specified configuration
rather than hard-coding debug to be disabled.
Signed-off-by: James O. D. Hunt <james.o.hunt@intel.com>
For now, image nvdimm on qemu/arm64 depends on UEFI/ACPI, so if there
is no firmware offered, it should be disabled.
Fixes: #6468
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This PR is a continuing work for (kata-containers#3679).
This generalizes the previous VFIO device handling which only
focuses on PCI to include AP (IBM Z specific).
Fixes: kata-containers#3678
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
Initial VFIO-AP support (#578) was simple, but somewhat hacky; a
different code path would be chosen for performing the hotplug, and
agent-side device handling was bound to knowing the assigned queue
numbers (APQNs) through some other means; plus the code for awaiting
them was written for the Go agent and never released. This code also
artificially increased the hotplug timeout to wait for the (relatively
expensive, thus limited to 5 seconds at the quickest) AP rescan, which
is impractical for e.g. common k8s timeouts.
Since then, the general handling logic was improved (#1190), but it
assumed PCI in several places.
In the runtime, introduce and parse AP devices. Annotate them as such
when passing to the agent, and include information about the associated
APQNs.
The agent awaits the passed APQNs through uevents and triggers a
rescan directly.
Fixes: #3678
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Generalize VFIO devices to allow for adding AP in the next patch.
The logic for VFIOPciDeviceMediatedType() has been changed and IsAPVFIOMediatedDevice() has been removed.
The rationale for the revomal is:
- VFIODeviceMediatedType is divided into 2 subtypes for AP and PCI
- Logic of checking a subtype of mediated device is included in GetVFIODeviceType()
- VFIOPciDeviceMediatedType() can simply fulfill the device addition based
on a type categorized by GetVFIODeviceType()
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
e.g., split_vfio_option is PCI-specific and should instead be named
split_vfio_pci_option. This mutually affects the runtime, most notably
how the labels are named for the agent.
Signed-off-by: Jakob Naucke <jakob.naucke@ibm.com>
Since shimv2 create task option is already implemented, we need to update the
corresponding comments.
Also, the ordering is also updated to fit with the code.
fixes: #3961
Signed-off-by: Chao Wu <chaowu@linux.alibaba.com>
This adds /dev/mshv to the list of sandbox devices so that VMMs can
create Hyper-V VMs.
In our testing, this also doesn't error out in case /dev/mshv isn't
present.
Fixes#6454.
Signed-off-by: Aurélien Bombo <abombo@microsoft.com>
When calling `MAKE_KERNEL_NAME` we're considering the default kernel
name will be `vmlinux.container` or `vmlinuz.container`, which is not
the case as the runtime-rs, when used with dragonball, relies on the
`vmlinu[zx]-dragonball-experimental.container` kernel.
Other hypervisors will have to introduce a similar
`MAKE_KERNEL_NAME_${HYPERVISOR}` to adapt this to the kernel they want
to use, similarly to what's already done for the go runtime.
By doing this we also ensure that no changes in the configuration file
will be required to run runtime-rs, with dragonball, as part of our CI
or as part of kata-deploy.
Fixes: #6290
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
On hotplug of memory as containers are started, remount all ephemeral mounts with size option set to the total sandbox memory
Fixes: #6417
Signed-off-by: Sidhartha Mani <sidhartha_mani@apple.com>
Some structs in the runtime-rs don't implement Default trait.
This commit adds the missing Default.
Fixes: #5463
Signed-off-by: Li Hongyu <lihongyu1999@bupt.edu.cn>
Currently, we only create the new exec process in runtime, this will cause error
when the following requests needing to be handled:
- Task: exec process
- Task: resize process pty
- ...
The agent do not do_exec_process when we handle ExecProcess, thus we can not find
any process information in the guest when we handle ResizeProcessPty. This will
report an error.
In this commit, the handling process is modified to the:
* Modify process tty_win information in runtime
* If the exec process is not running, we just return. And the truly pty_resize will
happen when start_process
Fixes: #6248
Signed-off-by: Yushuo <y-shuo@linux.alibaba.com>
Implements resize-volume handlers in shim-mgmt,
trait for sandbox and add RPC calls to agent.
Note the actual rpc handler for the resize request is currently not
implemented, refer to issue #3694.
Fixes#5369
Signed-off-by: Tingzhou Yuan <tzyuan15@bu.edu>
For external hypervisors(qemu, cloud-hypervisor, ...), the ns they launch vm in
is different from internal hypervisor(dragonball). And when we doing CreateContainer
hook, we will rely on the netns path. So we add a get_ns_path API.
Fixes: #6442
Signed-off-by: Yushuo <y-shuo@linux.alibaba.com>
Implements get-volume-stats trait for sandbox,
handler for shim-mgmt and add RPC calls to
agent. Also added type conversions in trans.rs
Fixes#5369
Signed-off-by: Tingzhou Yuan <tzyuan15@bu.edu>
- implement update_ephemeral_mounts rpc
- for each mountpoint passed in, remount it with new options
Signed-off-by: Sidhartha Mani <sidhartha_mani@apple.com>
- adds a new rpc call to the agent service named `updateEphemeralMounts`
- this call takes a list of grpc.Storage objects
Signed-off-by: Sidhartha Mani <sidhartha_mani@apple.com>
This commit adds support for pmu virtualization on aarch64. The
initialization of pmu is in the following order:
1. Receive pmu parameter(vpmu_feature) from runtime-rs to determine the
VpmuFeatureLevel.
2. Judge whether to initialize pmu devices and add pmu device node into
fdt on aarch64, according to VpmuFeatureLevel.
Fixes: #6168
Signed-off-by: xuejun-xj <jiyunxue@linux.alibaba.com>
When update the nydusd to 2.2, the argument "--hybrid-mode" cause
the following error:
thread 'main' panicked at 'ArgAction::SetTrue / ArgAction::SetFalse is defaulted'
Maybe we should remove it to upgrad nydusd
Fixes: #6407
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
Set process status to exited at end of io wait, which indicate process
exited only, but stop process has not been finished. Otherwise, the
cleanup_container will be skipped.
Fixes: #6393
Signed-off-by: Yipeng Yin <yinyipeng@bytedance.com>
