Allow API consumers to change the maximum number of ports in the
virtio-serial devices, setting a lower number of ports can improve the
boot time and reduce the attack surface.
Before this patch on arm64:
[ 0.028664] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.055031] printk: console [hvc0] enabled
After this patch on arm64:
[ 0.028484] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.031370] printk: console [hvc0] enabled
Fixes: #2676
Signed-off-by: Jia He <justin.he@arm.com>
Add the verification of some basic protections, namely that:
- EnableAnnotations is honored
- Dangerous paths cannot be modified if no match
- Errors are returned when expected
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Warning from gocyclo during make check:
virtcontainers/pkg/oci/utils.go:404:1: cyclomatic complexity 37 of func `addHypervisorConfigOverrides` is high (> 30) (gocyclo)
func addHypervisorConfigOverrides(ocispec specs.Spec, config *vc.SandboxConfig, runtime RuntimeConfig) error {
^
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
There are a few interesting corner cases to consider for this
function.
Fixes: #901
Suggested-by: James O.D. Hunt <james.o.hunt@intel.com>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
James O.D Hunt: "But also, regexpContains() and
checkPathIsInGlobList() seem like good candidates for some unit
tests. The "look" obvious, but a few boundary condition tests would be
useful I think (filenames with spaces, backslashes, special
characters, and relative & absolute paths are also an interesting
thought here)."
There aren't that many boundary conditions on a list with regexps,
if you assume the regexp match function itself works. However, the
tests is useful in documenting expectations.
Fixes: #901
Suggested-by: James O.D. Hunt <james.o.hunt@intel.com>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Add a field "enable_annotations" to the runtime configuration that can
be used to whitelist annotations using a list of regular expressions,
which are used to match any part of the base annotation name, i.e. the
part after "io.katacontainers.config.hypervisor."
For example, the following configuraiton will match "virtio_fs_daemon",
"initrd" and "jailer_path", but not "path" nor "firmware":
enable_annotations = [ "virtio.*", "initrd", "_path" ]
The default is an empty list of enabled annotations, which disables
annotations entirely.
If an anontation is rejected, the message is something like:
annotation io.katacontainers.config.hypervisor.virtio_fs_daemon is not enabled
Fixes: #901
Suggested-by: Peng Tao <tao.peng@linux.alibaba.com>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
When filtering annotations that correspond to paths,
e.g. hypervisor.path, it is better to use a glob syntax than a regexp
syntax, as it is more usual for paths, and prevents classes of matches
that are undesirable in our case, such as matching .. against .*
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
A comment talking about runtime related annotations describes them as
being related to the agent. A similar comment for the agent
annotations is missing.
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
This one could theoretically be used to overwrite data on the host.
It seems somewhat less risky than the earlier ones for a number
of reasons, but worth protecting a little anyway.
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
This also adds annotation for ctlpath which were not present
before. It's better to implement the code consistenly right now to make
sure that we don't end up with a leaky implementation tacked on later.
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
The jailer_path annotation can be used to execute arbitrary code on
the host. Add a jailer_path_list configuration entry providing a list
of regular expressions that can be used to filter annotations that
represent valid file names.
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
The annotation is provided, so it should be respected.
Furthermore, it is important to implement it with the appropriate
protetions similar to what was done for virtiofsd.
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Sending the virtio_fs_daemon annotation can be used to execute
arbitrary code on the host. In order to prevent this, restrict the
values of the annotation to a list provided by the configuration
file.
Fixes: #901
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Kata doesn't map any numa topologies in the guest. Let's make sure we
clear the Cpuset fields before passing container updates to the
guest.
Note, in the future we may want to have a vCPU to guest CPU mapping and
still include the cpuset.Cpus. Until we have this support, clear this as
well.
Fixes: #932
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
CPUSet cgroup allows for pinning the memory associated with a cpuset to
a given numa node. Similar to cpuset.cpus, we should take cpuset.mems
into account for the sandbox-cgroup that Kata creates.
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
CPUSet cgroup allows for pinning the memory associated with a cpuset to
a given numa node. Similar to cpuset.cpus, we should take cpuset.mems
into account for the sandbox-cgroup that Kata creates.
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
Pulled from 1.18.4 Kubernetes, adding the cpuset pkg for managing
CPUSet calculations on the host. Go mod'ing the original code from
k8s.io/kubernetes was very painful, and this is very static, so let's
just pull in what we need.
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
Allow for constraining the cpuset as well as the devices-whitelist . Revert
sandbox constraints for cpu/memory, as they break the K8S use case. Can
re-add behind a non-default flag in the future.
The sandbox CPUSet should be updated every time a container is created,
updated, or removed.
To facilitate this without rewriting the 'non constrained cgroup'
handling, let's add to the Sandbox's cgroupsUpdate function.
Signed-off-by: Eric Ernst <eric.g.ernst@gmail.com>
We can rely on the error handling of the actual HTTP API calls to catch
errors, and don't need to call VmmPing explicitly in advance.
Signed-off-by: Bo Chen <chen.bo@intel.com>
The cloud-hypervisor commit `6d30fe05` introduced a fix on its API for
VFIO device hotplug (`VmAddDevice`), which is required for supporting
VFIO unplug through openAPI calls in kata.
Signed-off-by: Bo Chen <chen.bo@intel.com>
Tag openapi-generator-cli container to v4.3.1 that is the latest
stable, this way we can have reproducible builds and the same
generated code in all the systems
Signed-off-by: Julio Montes <julio.montes@intel.com>
Support the `sgx.intel.com/epc` annotation that is defined by the intel
k8s plugin. This annotation enables SGX. Hardware-based isolation and
memory encryption.
For example, use `sgx.intel.com/epc = "64Mi"` to create a container
with 1 EPC section with pre-allocated memory.
At the time of writing this patch, SGX patches have not landed on the
linux kernel project.
The following github kernel fork contains all the SGX patches for the
host and guest: https://github.com/intel/kvm-sgxfixes#483
Signed-off-by: Julio Montes <julio.montes@intel.com>
Firecracker expose metrics through fifo file
and using a JSON format. This PR will parse the
Firecracker's metrics and convert to Prometheus metrics.
Fixes: #472
Signed-off-by: bin liu <bin@hyper.sh>
Somehow we are not running static checks for a long time.
And that ended up with a lot for errors.
* Ensure debug options are valid is dropped
* fix snap links
* drop extra CONTRIBUTING.md
* reference kata-pkgsync
* move CODEOWNERS to proper place
* remove extra CODE_OF_CONDUCT.md.
* fix spell checker error on Developer-Guide.md
Signed-off-by: Peng Tao <bergwolf@hyper.sh>
Set enable_debug_console=true in Kata's congiguration file,
runtime will pass `agent.debug_console`
and `agent.debug_console_vport=1026` to agent.
Fixes: #245
Signed-off-by: bin liu <bin@hyper.sh>
Create "class" and "config" file in temporary device BDF dir,
and remove dir created by ioutil.TempDir() when test finished.
fixes: #746
Signed-off-by: zhanghj <zhanghj.lc@inspur.com>
The latest release of cloud-hypervisor v0.10.0 contains the following
updates: 1) `virtio-block` Support for Multiple Descriptors; 2) Memory
Zones; 3) `Seccomp` Sandbox Improvements; 4) Preliminary KVM HyperV
Emulation Control; 5) various bug fixes and refactoring.
Note that this patch updates the client code of clh's HTTP API in kata,
while the 'versions.yaml' file was updated in an earlier PR.
Fixes: #789
Signed-off-by: Bo Chen <chen.bo@intel.com>
Clear the 1.x branch api methods in the 2.0. Keep the same methods to
the VC interface, like the VCImpl struct.
Fixes: #751
Signed-off-by: Ychau Wang <wangyongchao.bj@inspur.com>
