Fixes: #7573
To enable this feature, build your rootfs using AGENT_POLICY=yes. The
default is AGENT_POLICY=no.
Building rootfs using AGENT_POLICY=yes has the following effects:
1. The kata-opa service gets included in the Guest image.
2. The agent gets built using AGENT_POLICY=yes.
After this patch, the shim calls SetPolicy if and only if a Policy
annotation is attached to the sandbox/pod. When creating a sandbox/pod
that doesn't have an attached Policy annotation:
1. If the agent was built using AGENT_POLICY=yes, the new sandbox uses
the default agent settings, that might include a default Policy too.
2. If the agent was built using AGENT_POLICY=no, the new sandbox is
executed the same way as before this patch.
Any SetPolicy calls from the shim to the agent fail if the agent was
built using AGENT_POLICY=no.
If the agent was built using AGENT_POLICY=yes:
1. The agent reads the contents of a default policy file during sandbox
start-up.
2. The agent then connects to the OPA service on localhost and sends
the default policy to OPA.
3. If the shim calls SetPolicy:
a. The agent checks if SetPolicy is allowed by the current
policy (the current policy is typically the default policy
mentioned above).
b. If SetPolicy is allowed, the agent deletes the current policy
from OPA and replaces it with the new policy it received from
the shim.
A typical new policy from the shim doesn't allow any future SetPolicy
calls.
4. For every agent rpc API call, the agent asks OPA if that call
should be allowed. OPA allows or not a call based on the current
policy, the name of the agent API, and the API call's inputs. The
agent rejects any calls that are rejected by OPA.
When building using AGENT_POLICY_DEBUG=yes, additional Policy logging
gets enabled in the agent. In particular, information about the inputs
for agent rpc API calls is logged in /tmp/policy.txt, on the Guest VM.
These inputs can be useful for investigating API calls that might have
been rejected by the Policy. Examples:
1. Load a failing policy file test1.rego on a different machine:
opa run --server --addr 127.0.0.1:8181 test1.rego
2. Collect the API inputs from Guest's /tmp/policy.txt and test on the
machine where the failing policy has been loaded:
curl -X POST http://localhost:8181/v1/data/agent_policy/CreateContainerRequest \
--data-binary @test1-inputs.json
Signed-off-by: Dan Mihai <dmihai@microsoft.com>
When at least one `io.katacontainers.fs-opt.layer` option is added to
the rootfs, it gets inserted into the VM as a layer, and the file system
is mounted as an overlay of all layers using the overlayfs driver.
Additionally, if the `io.katacontainers.fs-opt.block_device=file` option
is present in a layer, it is mounted as a block device backed by a file
on the host.
Fixes: #7536
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Now that we have propper AP device support add a
unit test for testing the correct Attach/Detach of AP devices.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Removing HotplugVFIOonRootBus which is obsolete with the latest PCI
topology changes, users can set cold_plug_vfio or hot_plug_vfio either
in the configuration.toml or via annotations.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
The device.Bus was reset if a specific combination of
configuration parameters were not met. With the new
PCIe topology this should not happen anymore
Fixes: #7381
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Currently, even when using devmapper, if the VMM supports virtio-fs /
virtio-9p, that's used to share a few files between the host and the
guest.
This *needed*, as we need to share with the guest contents like secrets,
certificates, and configurations, via Kubernetes objects like configMaps
or secrets, and those are rotated and must be updated into the guest
whenever the rotation happens.
However, there are still use-cases users can live with just copying
those files into the guest at the pod creation time, and for those
there's absolutely no need to have a shared filesystem process running
with no extra obvious benefit, consuming memory and even increasing the
attack surface used by Kata Containers.
For the case mentioned above, we should allow users, making it very
clear which limitations it'll bring, to run Kata Containers with
devmapper without actually having to use a shared file system, which is
already the approach taken when using Firecracker as the VMM.
Fixes: #7207
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
If we override the cold, hot plug with an annotation
we need to reset the other plugging mechanism to NoPort
otherwise both will be enabled.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
In Virt the vhost-user-block is an PCIe device so
we need to make sure to consider it as well. We're keeping
track of vhost-user-block devices and deduce the correct
amount of PCIe root ports.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Now it is possible to configure the PCIe topology via annotations
and addded a simple test, checking for Invalid and RootPort
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Removed the configuration of PCIeRootPort and PCIeSwitchPort, those
values can be deduced in createPCIeTopology
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Refactor the bus assignment so that the call to GetAllVFIODevicesFromIOMMUGroup
can be used by any module without affecting the topology.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
The hypervisor_state file was the wrong location for the PCIe Port
settings, moved everything under device umbrella, where it can be
consumed more easily and we do not get into circular deps.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Supports both online and offline modes of interaction with simple-kbs
for SEV/SEV-ES confidential guests.
Fixes: #6795
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
The sev package provides utilities for launching AMD SEV and SEV-ES
confidential guests.
Fixes: #6795
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
With this fix the vCPU pinning feature chooses the correct
physical cores to pin the vCPU threads on rather than always using core 0.
Fixes#6831
Signed-off-by: Peteris Rudzusiks <rye@stripe.com>
Added driver util function for easier handling of VFIO
devices outside of the VFIO module. At the sandbox level
we may need to set options depending if we have a VFIO/PCIe
device, like the fwCfg for confiential guests.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Some functions may be used in other modules then only in
the VFIO module, extract them and make them available to
other layers like sandbox.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
If we have a VFIO device and cold-plug is enabled
we mark each device as ColdPlug=true and let the VFIO
module do the attaching.
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
For the hypervisor to distinguish between PCIe components, adding
a new enum that can be used for hot-plug and cold-plug of PCIe devices
Fixes: #6687
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
Expanded tests on signals_test.go to cover more lines of code. 'go test' won't show 100% coverage (only 66.7%), because one test need to spawn a new
process (since it is testing a function that calls os.Exit(1)).
Fixes: #256
Signed-off-by: Eduardo Berrocal <eduardo.berrocal@intel.com>
On some systems a GPU is in a IOMMU group with a PCI Bridge and
PCI Host Bridge. Per default no PCI Bridge needs to be passed-through.
When scanning the IOMMU group, ignore devices with a 0x60 class ID prefix.
Fixes: #6663
Signed-off-by: Zvonko Kaiser <zkaiser@nvidia.com>
The socket file for shim management is created in /run/kata
and it isn't deleted after the container is stopped. After
running and stopping thousands of containers /run folder
will run out of space.
Fixes#6622
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Co-authored-by: Greg Kurz <groug@kaod.org>
Since TDX doesn't support readonly memslot, TDVF cannot be mapped as
pflash device and it actually works as RAM. "-bios" option is chosen to
load TDVF.
OVMF is the opensource firmware that implements the TDVF support. Thus
the command line to specify and load TDVF is ``-bios OVMF.fd``
Signed-off-by: Fabiano Fidêncio <fabiano.fidencio@intel.com>
The kata monitor metrics API returns a huge size response,
if containers or sandboxs are a large number,
focus on what we need will be harder.
Fixes: #6500
Signed-off-by: Miao Xia <xia.miao1@zte.com.cn>
For now, image nvdimm on qemu/arm64 depends on UEFI/ACPI, so if there
is no firmware offered, it should be disabled.
Fixes: #6468
Signed-off-by: Jianyong Wu <jianyong.wu@arm.com>
This PR is a continuing work for (kata-containers#3679).
This generalizes the previous VFIO device handling which only
focuses on PCI to include AP (IBM Z specific).
Fixes: kata-containers#3678
Signed-off-by: Hyounggyu Choi <Hyounggyu.Choi@ibm.com>
