Updated dependencies and version

README.md

@@ -48,23 +48,23 @@ nomadnet --daemon
 nomadnet --help
 ```
 
+**Please Note**: If this is the very first time you use pip to install a program on your system, you might need to reboot your system for the program to become available. If you get a "command not found" error or similar when running the program, reboot your system and try again.
+
 The first time the program is running, you will be presented with the **Guide section**, which contains all the information you need to start using Nomad Network.
 
 To use Nomad Network on packet radio or LoRa, you will need to configure your Reticulum installation to use any relevant packet radio TNCs or LoRa devices on your system. See the [Reticulum documentation](https://markqvist.github.io/Reticulum/manual/interfaces.html) for info. For a general introduction on how to set up such a system, take a look at [this post](https://unsigned.io/private-messaging-over-lora/).
 
 If you want to try Nomad Network without building your own physical network, you can connect to the [Unsigned.io RNS Testnet](https://github.com/markqvist/Reticulum#public-testnet) over the Internet, where there is already some Nomad Network and LXMF activity. If you connect to the testnet, you can leave nomadnet running for a while and wait for it to receive announces from other nodes on the network that host pages or services, or you can try connecting directly to some nodes listed here:
 
- - `464ddc8cd323648ef919a638923b4916` Dublin Hub Testnet Node
+ - `abb3ebcd03cb2388a838e70c001291f9` Dublin Hub Testnet Node
- - `5cda089fc42675bdd904c6d06db87d49` Frankfurt Hub Testnet Node
+ - `ea6a715f814bdc37e56f80c34da6ad51` Frankfurt Hub Testnet Node
 
 To browse pages on a node that is not currently known, open the URL dialog in the `Network` section of the program by pressing `Ctrl+U`, paste or enter the address and select `Go` or press enter. Nomadnet will attempt to discover and connect to the requested node.
 
-**Please Note**: If this is the very first time you use pip to install a program on your system, you might need to reboot your system for the program to become available. If you get a "command not found" error or similar when running the program, reboot your system and try again.
-
 ### Install on Android
 You can install Nomad Network on Android using Termux, but there's a few more commands involved than the above one-liner. The process is documented in the [Android Installation](https://markqvist.github.io/Reticulum/manual/gettingstartedfast.html#reticulum-on-android) section of the Reticulum Manual. Once the Reticulum has been installed according to the linked documentation, Nomad Network can be installed as usual with pip.
 
-For a native Android application with a graphical user interface, have a look at [Sideband](https://unsigned.io/sideband).
+For a native Android application with a graphical user interface, have a look at [Sideband](https://github.com/markqvist/Sideband).
 
 ### Docker Images
 

nomadnet/Directory.py

@@ -5,6 +5,29 @@ import time
 import nomadnet
 import RNS.vendor.umsgpack as msgpack
 
+class PNAnnounceHandler:
+    def __init__(self, owner):
+        self.aspect_filter = "lxmf.propagation"
+        self.owner = owner
+
+    def received_announce(self, destination_hash, announced_identity, app_data):
+        try:
+            if type(app_data) == bytes:
+                data = msgpack.unpackb(app_data)
+
+                if data[0] == True:
+                    RNS.log("Received active propagation node announce from "+RNS.prettyhexrep(destination_hash))
+
+                    associated_peer = RNS.Destination.hash_from_name_and_identity("lxmf.delivery", announced_identity)
+                    associated_node = RNS.Destination.hash_from_name_and_identity("nomadnetwork.node", announced_identity)
+
+                    self.owner.app.directory.pn_announce_received(destination_hash, app_data, associated_peer, associated_node)
+                    self.owner.app.autoselect_propagation_node()
+
+        except Exception as e:
+            RNS.log("Error while evaluating propagation node announce, ignoring announce.", RNS.LOG_DEBUG)
+            RNS.log("The contained exception was: "+str(e), RNS.LOG_DEBUG)
+
 class Directory:
     ANNOUNCE_STREAM_MAXLENGTH = 64
 
@@ -14,8 +37,6 @@ class Directory:
         app = nomadnet.NomadNetworkApp.get_shared_instance()
 
         if not destination_hash in app.ignored_list:
-            destination_hash_text = RNS.hexrep(destination_hash, delimit=False)
-
             associated_peer = RNS.Destination.hash_from_name_and_identity("lxmf.delivery", announced_identity)
 
             app.directory.node_announce_received(destination_hash, app_data, associated_peer)
@@ -31,6 +52,9 @@ class Directory:
         self.app = app
         self.load_from_disk()
 
+        self.pn_announce_handler = PNAnnounceHandler(self)
+        RNS.Transport.register_announce_handler(self.pn_announce_handler)
+
 
     def save_to_disk(self):
         try:
@@ -90,7 +114,7 @@ class Directory:
     def lxmf_announce_received(self, source_hash, app_data):
         if app_data != None:
             timestamp = time.time()
-            self.announce_stream.insert(0, (timestamp, source_hash, app_data, False))
+            self.announce_stream.insert(0, (timestamp, source_hash, app_data, "peer"))
             while len(self.announce_stream) > Directory.ANNOUNCE_STREAM_MAXLENGTH:
                 self.announce_stream.pop()
 
@@ -100,7 +124,7 @@ class Directory:
     def node_announce_received(self, source_hash, app_data, associated_peer):
         if app_data != None:
             timestamp = time.time()
-            self.announce_stream.insert(0, (timestamp, source_hash, app_data, True))
+            self.announce_stream.insert(0, (timestamp, source_hash, app_data, "node"))
             while len(self.announce_stream) > Directory.ANNOUNCE_STREAM_MAXLENGTH:
                 self.announce_stream.pop()
 
@@ -113,6 +137,27 @@ class Directory:
             if hasattr(self.app.ui, "main_display"):
                 self.app.ui.main_display.sub_displays.network_display.directory_change_callback()
 
+    def pn_announce_received(self, source_hash, app_data, associated_peer, associated_node):
+        found_node = None
+        for sh in self.directory_entries:
+            if sh == associated_node:
+                found_node = True
+                break
+
+        for e in self.announce_stream:
+            if e[1] == associated_node:
+                found_node = True
+                break
+
+        if not found_node:
+            timestamp = time.time()
+            self.announce_stream.insert(0, (timestamp, source_hash, app_data, "pn"))
+            while len(self.announce_stream) > Directory.ANNOUNCE_STREAM_MAXLENGTH:
+                self.announce_stream.pop()
+            
+            if hasattr(self.app.ui, "main_display"):
+                self.app.ui.main_display.sub_displays.network_display.directory_change_callback()
+
     def remove_announce_with_timestamp(self, timestamp):
         selected_announce = None
         for announce in self.announce_stream:
@@ -250,11 +295,6 @@ class DirectoryEntry:
     def __init__(self, source_hash, display_name=None, trust_level=UNKNOWN, hosts_node=False, preferred_delivery=None, identify_on_connect=False):
         if len(source_hash) == RNS.Identity.TRUNCATED_HASHLENGTH//8:
             self.source_hash  = source_hash
-
-            # TODO: Clean
-            # if display_name  == None:
-            #     display_name  = source_hash
-
             self.display_name = display_name
 
             if preferred_delivery == None:

nomadnet/NomadNetworkApp.py

@@ -256,7 +256,7 @@ class NomadNetworkApp:
                             RNS.log("The contained exception was: "+str(e), RNS.LOG_DEBUG)
 
             except Exception as e:
-                RNS.log("Error while fetching loading list of ignored destinations: "+str(e), RNS.LOG_ERROR)
+                RNS.log("Error while loading list of ignored destinations: "+str(e), RNS.LOG_ERROR)
 
         self.directory = nomadnet.Directory(self)
 
@@ -436,8 +436,9 @@ class NomadNetworkApp:
     def autoselect_propagation_node(self):
         selected_node = None
 
-        if "propagation_node" in self.peer_settings and self.directory.find(self.peer_settings["propagation_node"]):
+        if "propagation_node" in self.peer_settings:
-            selected_node = self.directory.find(self.peer_settings["propagation_node"])
+            selected_node = self.peer_settings["propagation_node"]
+        
         else:
             nodes = self.directory.known_nodes()
             trusted_nodes = []
@@ -450,19 +451,14 @@ class NomadNetworkApp:
 
                     if hops < best_hops:
                         best_hops = hops
-                        selected_node = node
+                        selected_node = node.source_hash
 
         if selected_node == None:
-            RNS.log("Could not autoselect a propagation node! LXMF propagation will not be available until a trusted node announces on the network.", RNS.LOG_WARNING)
+            RNS.log("Could not autoselect a propagation node! LXMF propagation will not be available until a trusted node announces on the network, or a propagation node is manually selected.", RNS.LOG_WARNING)
         else:
-            node_identity = RNS.Identity.recall(selected_node.source_hash)
+            pn_name_str = ""
-            if node_identity != None:
+            RNS.log("Selecting "+RNS.prettyhexrep(selected_node)+pn_name_str+" as default LXMF propagation node", RNS.LOG_INFO)
-                propagation_hash = RNS.Destination.hash_from_name_and_identity("lxmf.propagation", node_identity)
+            self.message_router.set_outbound_propagation_node(selected_node)
-                RNS.log("Selecting "+selected_node.display_name+" "+RNS.prettyhexrep(propagation_hash)+" as default LXMF propagation node", RNS.LOG_INFO)
-                self.message_router.set_outbound_propagation_node(propagation_hash)
-            else:
-                RNS.log("Could not recall identity for autoselected LXMF propagation node "+RNS.prettyhexrep(selected_node.source_hash), RNS.LOG_WARNING)
-                RNS.log("LXMF propagation will not be available until a trusted node announces on the network.", RNS.LOG_WARNING)
 
     def get_user_selected_propagation_node(self):
         if "propagation_node" in self.peer_settings:

nomadnet/_version.py

@@ -1 +1 @@
-__version__ = "0.2.2"
+__version__ = "0.2.6"

nomadnet/ui/textui/Conversations.py

@@ -398,10 +398,15 @@ class ConversationsDisplay():
         if pn_ident != None:
             node_hash = RNS.Destination.hash_from_name_and_identity("nomadnetwork.node", pn_ident)
             pn_entry = self.app.directory.find(node_hash)
+            pn_display_str = " "
+            if pn_entry != None:
+                pn_display_str += " "+str(pn_entry.display_name)
+            else:
+                pn_display_str += " "+RNS.prettyhexrep(pn_hash)
 
             dialog = DialogLineBox(
                 urwid.Pile([
-                    urwid.Text(""+g["node"]+" "+str(pn_entry.display_name), align="center"),
+                    urwid.Text(""+g["node"]+pn_display_str, align="center"),
                     urwid.Divider(g["divider1"]),
                     sync_progress,
                     urwid.Divider(g["divider1"]),
@@ -417,7 +422,7 @@ class ConversationsDisplay():
                 urwid.Pile([
                     urwid.Text(""),
                     urwid.Text("No trusted nodes found, cannot sync!\n", align="center"),
-                    urwid.Text("To syncronise messages from the network, one or more nodes must be marked as trusted in the Known Nodes list. Nomad Network will then automatically sync from the nearest trusted node.", align="left"),
+                    urwid.Text("To syncronise messages from the network, one or more nodes must be marked as trusted in the Known Nodes list, or a node must manually be selected as the default propagation node. Nomad Network will then automatically sync from the nearest trusted node, or the manually selected one.", align="left"),
                     urwid.Text(""),
                     button_columns
                 ]), title="Message Sync"

nomadnet/ui/textui/Guide.py

@@ -272,7 +272,7 @@ In the `![ Conversations ]`! part of the program you can view and interact with
 
 By default, Nomad Network will attempt to deliver messages to a peer directly. This happens by first establishing an encrypted link directly to the peer, and then delivering the message over it.
 
-If the desired peer is not available because it has disconnected from the network, this method will obviously fail. In this case, Nomad Network will attempt to deliver the message to a node, which will store and forward it over the network, for later retrieval by the destination peer. The message is encrypted with an ephemeral key before being transmitted to the network, and is only readable by the intended recipient.
+If the desired peer is not available because it has disconnected from the network, this method will obviously fail. In this case, Nomad Network will attempt to deliver the message to a node, which will store and forward it over the network, for later retrieval by the destination peer. The message is encrypted before being transmitted to the network, and is only readable by the intended recipient.
 
 For propagated delivery to work, one or more nodes must be available on the network. If one or more trusted nodes are available, Nomad Network will automatically select the most suitable node to send the message via, but you can also manually specify what node to use.
 
@@ -687,8 +687,8 @@ The Testnet also runs the latest version of Reticulum, often even a short while
 
 If you connect to the testnet, you can leave nomadnet running for a while and wait for it to receive announces from other nodes on the network that host pages or services, or you can try connecting directly to some nodes listed here:
 
- - Dublin Hub Testnet Node    : `!`[464ddc8cd323648ef919a638923b4916]`!
+ - Dublin Hub Testnet Node    : `!`[abb3ebcd03cb2388a838e70c001291f9]`!
- - Frankfurt Hub Testnet Node : `!`[5cda089fc42675bdd904c6d06db87d49]`!
+ - Frankfurt Hub Testnet Node : `!`[ea6a715f814bdc37e56f80c34da6ad51]`!
 
 To browse pages on a node that is not currently known, open the URL dialog in the `![ Network ]`! section of the program by pressing `!Ctrl+U`!, paste or enter the address and select `!< Go >`! or press enter. Nomadnet will attempt to discover and connect to the requested node. You can save the currently connected node by pressing `!Ctrl+S`!.
 '''

nomadnet/ui/textui/MicronParser.py

@@ -480,7 +480,11 @@ def make_output(state, line, url_delegate):
 
                 elif mode == "text":
                     if c == "\\":
-                        escape = True
+                        if escape:
+                            part += c
+                            escape = False
+                        else:
+                            escape = True
                     elif c == "`":
                         if escape:
                             part += c

nomadnet/ui/textui/Network.py

@@ -71,11 +71,17 @@ class AnnounceInfo(urwid.WidgetWrap):
         trust_str    = ""
         display_str  = self.app.directory.simplest_display_str(source_hash)
         addr_str     = "<"+RNS.hexrep(source_hash, delimit=False)+">"
-        is_node      = announce[3]
+        info_type    = announce[3]
 
-        if is_node:
+        is_node = False
-            type_string = "Node " + g["node"]
+        is_pn   = False
-        else:
+        if info_type == "node" or info_type == True:
+            type_string = "Nomad Network Node " + g["node"]
+            is_node = True
+        elif info_type == "pn":
+            type_string = "LXMF Propagation Node " + g["sent"]
+            is_pn = True
+        elif info_type == "peer" or info_type == False:
             type_string = "Peer " + g["peer"]
 
         try:
@@ -174,10 +180,20 @@ class AnnounceInfo(urwid.WidgetWrap):
             except Exception as e:
                 RNS.log("Error while starting conversation from announce. The contained exception was: "+str(e), RNS.LOG_ERROR)
 
+        def use_pn(sender):
+            show_announce_stream(None)
+            try:
+                self.app.set_user_selected_propagation_node(source_hash)
+            except Exception as e:
+                RNS.log("Error while setting active propagation node from announce. The contained exception was: "+str(e), RNS.LOG_ERROR)
+
         if is_node:
             type_button = ("weight", 0.45, urwid.Button("Connect", on_press=connect))
             msg_button =  ("weight", 0.45, urwid.Button("Msg Op", on_press=msg_op))
             save_button = ("weight", 0.45, urwid.Button("Save", on_press=save_node))
+        elif is_pn:
+            type_button = ("weight", 0.45, urwid.Button("Use as default", on_press=use_pn))
+            save_button = None
         else:
             type_button = ("weight", 0.45, urwid.Button("Converse", on_press=converse))
             save_button = None
@@ -187,21 +203,33 @@ class AnnounceInfo(urwid.WidgetWrap):
         else:
             button_columns = urwid.Columns([("weight", 0.45, urwid.Button("Back", on_press=show_announce_stream)), ("weight", 0.1, urwid.Text("")), type_button])
 
-        pile_widgets = [
+        pile_widgets = []
-            urwid.Text("Time  : "+ts_string, align="left"),
-            urwid.Text("Addr  : "+addr_str, align="left"),
-            urwid.Text("Type  : "+type_string, align="left"),
-            urwid.Text("Name  : "+display_str, align="left"),
-            urwid.Text(["Trust : ", (style, trust_str)], align="left"),
-            urwid.Divider(g["divider1"]),
-            urwid.Text(["Announce Data: \n", (data_style, data_str)], align="left"),
-            urwid.Divider(g["divider1"]),
-            button_columns
-        ]
 
-        if is_node:
+        if is_pn:
-            operator_entry = urwid.Text("Oprtr : "+op_str, align="left")
+            pile_widgets = [
-            pile_widgets.insert(4, operator_entry)
+                urwid.Text("Time  : "+ts_string, align="left"),
+                urwid.Text("Addr  : "+addr_str, align="left"),
+                urwid.Text("Type  : "+type_string, align="left"),
+                urwid.Divider(g["divider1"]),
+                button_columns
+            ]
+
+        else:
+            pile_widgets = [
+                urwid.Text("Time  : "+ts_string, align="left"),
+                urwid.Text("Addr  : "+addr_str, align="left"),
+                urwid.Text("Type  : "+type_string, align="left"),
+                urwid.Text("Name  : "+display_str, align="left"),
+                urwid.Text(["Trust : ", (style, trust_str)], align="left"),
+                urwid.Divider(g["divider1"]),
+                urwid.Text(["Announce Data: \n", (data_style, data_str)], align="left"),
+                urwid.Divider(g["divider1"]),
+                button_columns
+            ]
+
+            if is_node:
+                operator_entry = urwid.Text("Oprtr : "+op_str, align="left")
+                pile_widgets.insert(4, operator_entry)
 
         pile = urwid.Pile(pile_widgets)
 
@@ -220,7 +248,7 @@ class AnnounceStreamEntry(urwid.WidgetWrap):
 
         timestamp = announce[0]
         source_hash = announce[1]
-        is_node = announce[3]
+        announce_type = announce[3]
         self.app = app
         self.timestamp = timestamp
         time_format = app.time_format
@@ -257,10 +285,12 @@ class AnnounceStreamEntry(urwid.WidgetWrap):
             style         = "list_untrusted"
             focus_style   = "list_focus_untrusted"
 
-        if is_node:
+        if announce_type == "node" or announce_type == True:
             type_symbol = g["node"]
-        else:
+        elif announce_type == "peer" or announce_type == False:
             type_symbol = g["peer"]
+        elif announce_type == "pn":
+            type_symbol = g["sent"]
 
         widget = ListEntry(ts_string+" "+type_symbol+" "+display_str)
         urwid.connect_signal(widget, "click", self.display_announce, announce)
@@ -425,13 +455,15 @@ class KnownNodeInfo(urwid.WidgetWrap):
         if display_str == None:
             display_str = addr_str
 
+        pn_hash = RNS.Destination.hash_from_name_and_identity("lxmf.propagation", node_ident)
+
         if node_ident != None:
-            lxmf_addr_str = g["sent"]+" LXMF Propagation Node Address is "+RNS.prettyhexrep(RNS.Destination.hash_from_name_and_identity("lxmf.propagation", node_ident))
+            lxmf_addr_str = g["sent"]+" LXMF Propagation Node Address is "+RNS.prettyhexrep(pn_hash)
         else:
             lxmf_addr_str = "No associated Propagation Node known"
 
 
-        type_string = "Node " + g["node"]
+        type_string = "Nomad Network Node " + g["node"]
 
         if trust_level == DirectoryEntry.UNTRUSTED:
             trust_str     = "Untrusted"
@@ -525,7 +557,7 @@ class KnownNodeInfo(urwid.WidgetWrap):
         def save_node(sender):
             if self.pn_changed:
                 if propagation_node_checkbox.get_state():
-                    self.app.set_user_selected_propagation_node(source_hash)
+                    self.app.set_user_selected_propagation_node(pn_hash)
                 else:
                     self.app.set_user_selected_propagation_node(None)
 

setup.py

@@ -23,6 +23,6 @@ setuptools.setup(
     entry_points= {
         'console_scripts': ['nomadnet=nomadnet.nomadnet:main']
     },
-    install_requires=['rns>=0.3.12', 'lxmf>=0.1.8', 'urwid>=2.1.2'],
+    install_requires=['rns>=0.4.0', 'lxmf>=0.2.3', 'urwid>=2.1.2'],
     python_requires='>=3.6',
 )